Dear Borek,
Please see below regarding the contents of config.log. I tried the sample file beam2.in with the following input: /mnt/home/liuxueji/oofem-1.8/t3d/T3d/src/t3d -i beam2.in -o beam2.out -d 3.0 -U 0 -4 -2.5 -t 0 -X. The corresponding output is the following:
Thanks,
Xuejian
T3D - Triangulation of 3D Domains
Copyright: Daniel Rypl, 1995-2009
=================================
Non-commercial Software Licence:
--------------------------------
Holder: Ronald Harichandran
Civil and Environmental Engineering
Michigan State University
Expiration: unlimited
t3d -i beam2.in -o beam2.out -d 3.0 -U 0 -4 -2.5 -t 0 -X
Program started 17:25:45
Warning: Unrecognized option -X (input ignored)
Options analyzed 17:25:45
Input data analyzed 17:25:45
Octree built 17:25:45
Vertices discretized 17:25:45
Curves discretized 17:25:45
Surfaces discretized 17:25:45
Regions discretized 17:25:46
Discretization done 17:25:46
Output data printed 17:25:46
Program finished 17:25:46
Number of nodes: 1068 (FE) 1068 (total)
Number of edges: 0 (FE) 6445 (total)
Number of trias: 0 (FE) 10382 (total)
Number of tetras: 5004 (FE) 5004 (total)
Tetras quality: 3526 : (1.000 - 0.750) 70.46 %
1437 : (0.750 - 0.500) 28.72 %
41 : (0.500 - 0.000) 0.82 %
0.79959 - arithmetic mean quality
0.78132 - harmonic mean quality
0.30885 - worst quality (3988)
Real time consumed 0.19 sec
Memory consumed 3576 kB
Altogether 1 warning has been generated
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.57. Invocation command line was
$ ./configure --with-elixir=/mnt/home/liuxueji/oofem-1.8/t3d/Elixir
## --------- ##
## Platform. ##
## --------- ##
hostname = shaw
uname -m = x86_64
uname -r = 2.6.5-7.286_lustre.1.6.3custom
uname -s = Linux
uname -v = #2 SMP Wed Dec 5 17:26:03 EST 2007
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /mnt/home/liuxueji/openmpi-1.3.1/bin
PATH: /usr/voltaire/bin
PATH: /usr/voltaire/scripts
PATH: /usr/mellanox/bin
PATH: /opt/pdsh/bin
PATH: /opt/hpc/svn/1.5.0/bin
PATH: /opt/torque/sbin
PATH: /opt/torque/bin
PATH: /opt/moab/sbin
PATH: /opt/moab/bin
PATH: /opt/totalview/bin
PATH: /opt/hpc/mpiexec/mpiexec-0.82p1/bin
PATH: /opt/hpc/mvapich/0.9.9-intel/bin
PATH: /opt/abaqus/Commands
PATH: /opt/hpc/Fluent.Inc/bin
PATH: /opt/matlab/bin
PATH: /opt/hpc/Modules/3.2.0rc4/bin
PATH: /mnt/home/liuxueji/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /bin
PATH: /usr/games
PATH: /opt/gnome/bin
PATH: /opt/kde3/bin
PATH: /usr/lib/java/bin
PATH: /usr/sbin
PATH: /opt/pbs/bin
PATH: /opt/pbs/sbin
PATH: /opt/moab/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1380: checking whether make sets $(MAKE)
configure:1400: result: yes
configure:1466: checking for gcc
configure:1492: result: /usr/bin/gcc
configure:1736: checking for C compiler version
configure:1739: /usr/bin/gcc --version </dev/null >&5
gcc (GCC) 3.3.3 (SuSE Linux)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:1742: $? = 0
configure:1744: /usr/bin/gcc -v </dev/null >&5
Reading specs from /usr/lib64/gcc-lib/x86_64-suse-linux/3.3.3/specs
Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib64 --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib64 --with-system-zlib --enable-shared --enable-__cxa_atexit x86_64-suse-linux
Thread model: posix
gcc version 3.3.3 (SuSE Linux)
configure:1747: $? = 0
configure:1749: /usr/bin/gcc -V </dev/null >&5
gcc: `-V' option must have argument
configure:1752: $? = 1
configure:1776: checking for C compiler default output
configure:1779: /usr/bin/gcc conftest.c >&5
configure:1782: $? = 0
configure:1828: result: a.out
configure:1833: checking whether the C compiler works
configure:1839: ./a.out
configure:1842: $? = 0
configure:1859: result: yes
configure:1866: checking whether we are cross compiling
configure:1868: result: no
configure:1871: checking for suffix of executables
configure:1873: /usr/bin/gcc -o conftest conftest.c >&5
configure:1876: $? = 0
configure:1901: result:
configure:1907: checking for suffix of object files
configure:1929: /usr/bin/gcc -c conftest.c >&5
configure:1932: $? = 0
configure:1954: result: o
configure:1958: checking whether we are using the GNU C compiler
configure:1983: /usr/bin/gcc -c conftest.c >&5
configure:1986: $? = 0
configure:1989: test -s conftest.o
configure:1992: $? = 0
configure:2005: result: yes
configure:2011: checking whether /usr/bin/gcc accepts -g
configure:2033: /usr/bin/gcc -c -g conftest.c >&5
configure:2036: $? = 0
configure:2039: test -s conftest.o
configure:2042: $? = 0
configure:2053: result: yes
configure:2070: checking for /usr/bin/gcc option to accept ANSI C
configure:2131: /usr/bin/gcc -c -g -O2 conftest.c >&5
configure:2134: $? = 0
configure:2137: test -s conftest.o
configure:2140: $? = 0
configure:2158: result: none needed
configure:2176: /usr/bin/gcc -c -g -O2 conftest.c >&5
conftest.c:2: error: parse error before "me"
configure:2179: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:2293: checking how to run the C preprocessor
configure:2329: /usr/bin/gcc -E conftest.c
configure:2335: $? = 0
configure:2367: /usr/bin/gcc -E conftest.c
configure:2366:28: ac_nonexistent.h: No such file or directory
configure:2373: $? = 1
configure: failed program was:
| #line 2358 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:2411: result: /usr/bin/gcc -E
configure:2436: /usr/bin/gcc -E conftest.c
configure:2442: $? = 0
configure:2474: /usr/bin/gcc -E conftest.c
configure:2473:28: ac_nonexistent.h: No such file or directory
configure:2480: $? = 1
configure: failed program was:
| #line 2465 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3085: checking for library containing strerror
configure:3116: /usr/bin/gcc -o conftest -g -O2 conftest.c >&5
configure:3119: $? = 0
configure:3122: test -s conftest
configure:3125: $? = 0
configure:3184: result: none required
configure:3234: checking for ranlib
configure:3250: found /usr/bin/ranlib
configure:3261: result: ranlib
configure:3285: checking for a BSD-compatible install
configure:3339: result: /usr/bin/install -c
configure:3350: checking whether ln -s works
configure:3354: result: yes
configure:3364: checking for egrep
configure:3374: result: grep -E
configure:3380: checking for AIX
configure:3403: result: no
configure:3417: checking build system type
configure:3435: result: x86_64-unknown-linux-gnu
configure:3443: checking host system type
configure:3457: result: x86_64-unknown-linux-gnu
configure:3487: checking for /usr/bin/gcc
configure:3514: result: no
configure:3487: checking for gcc
configure:3503: found /usr/bin/gcc
configure:3514: result: yes
configure:3539: gcc -c -g -O2 conftest.c >&5
configure:3542: $? = 0
configure:3545: test -s conftest.o
configure:3548: $? = 0
configure:3565: checking compile with prototypes
configure:3567: result: yes (gcc )
configure:3575: checking for gm4
configure:3608: result: no
configure:3575: checking for gnum4
configure:3608: result: no
configure:3575: checking for m4
configure:3593: found /usr/bin/m4
configure:3605: result: /usr/bin/m4
configure:3618: checking for an ANSI C-conforming const
configure:3686: gcc -c -g -O2 conftest.c >&5
configure:3689: $? = 0
configure:3692: test -s conftest.o
configure:3695: $? = 0
configure:3706: result: yes
configure:3718: checking for ANSI C header files
configure:3744: gcc -c -g -O2 conftest.c >&5
configure:3747: $? = 0
configure:3750: test -s conftest.o
configure:3753: $? = 0
configure:3842: gcc -o conftest -g -O2 conftest.c >&5
configure:3845: $? = 0
configure:3847: ./conftest
configure:3850: $? = 0
configure:3865: result: yes
configure:3892: checking for sys/types.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for sys/stat.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for stdlib.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for string.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for memory.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for strings.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for inttypes.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for stdint.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3892: checking for unistd.h
configure:3909: gcc -c -g -O2 conftest.c >&5
configure:3912: $? = 0
configure:3915: test -s conftest.o
configure:3918: $? = 0
configure:3929: result: yes
configure:3957: checking math.h usability
configure:3970: gcc -c -g -O2 conftest.c >&5
configure:3973: $? = 0
configure:3976: test -s conftest.o
configure:3979: $? = 0
configure:3989: result: yes
configure:3993: checking math.h presence
configure:4004: /usr/bin/gcc -E conftest.c
configure:4010: $? = 0
configure:4029: result: yes
configure:4065: checking for math.h
configure:4072: result: yes
configure:3957: checking stdio.h usability
configure:3970: gcc -c -g -O2 conftest.c >&5
configure:3973: $? = 0
configure:3976: test -s conftest.o
configure:3979: $? = 0
configure:3989: result: yes
configure:3993: checking stdio.h presence
configure:4004: /usr/bin/gcc -E conftest.c
configure:4010: $? = 0
configure:4029: result: yes
configure:4065: checking for stdio.h
configure:4072: result: yes
configure:3957: checking ctype.h usability
configure:3970: gcc -c -g -O2 conftest.c >&5
configure:3973: $? = 0
configure:3976: test -s conftest.o
configure:3979: $? = 0
configure:3989: result: yes
configure:3993: checking ctype.h presence
configure:4004: /usr/bin/gcc -E conftest.c
configure:4010: $? = 0
configure:4029: result: yes
configure:4065: checking for ctype.h
configure:4072: result: yes
configure:4112: checking time.h usability
configure:4125: gcc -c -g -O2 conftest.c >&5
configure:4128: $? = 0
configure:4131: test -s conftest.o
configure:4134: $? = 0
configure:4144: result: yes
configure:4148: checking time.h presence
configure:4159: /usr/bin/gcc -E conftest.c
configure:4165: $? = 0
configure:4184: result: yes
configure:4220: checking for time.h
configure:4227: result: yes
configure:4112: checking sys/time.h usability
configure:4125: gcc -c -g -O2 conftest.c >&5
configure:4128: $? = 0
configure:4131: test -s conftest.o
configure:4134: $? = 0
configure:4144: result: yes
configure:4148: checking sys/time.h presence
configure:4159: /usr/bin/gcc -E conftest.c
configure:4165: $? = 0
configure:4184: result: yes
configure:4220: checking for sys/time.h
configure:4227: result: yes
configure:4112: checking sys/utsname.h usability
configure:4125: gcc -c -g -O2 conftest.c >&5
configure:4128: $? = 0
configure:4131: test -s conftest.o
configure:4134: $? = 0
configure:4144: result: yes
configure:4148: checking sys/utsname.h presence
configure:4159: /usr/bin/gcc -E conftest.c
configure:4165: $? = 0
configure:4184: result: yes
configure:4220: checking for sys/utsname.h
configure:4227: result: yes
configure:4112: checking fcntl.h usability
configure:4125: gcc -c -g -O2 conftest.c >&5
configure:4128: $? = 0
configure:4131: test -s conftest.o
configure:4134: $? = 0
configure:4144: result: yes
configure:4148: checking fcntl.h presence
configure:4159: /usr/bin/gcc -E conftest.c
configure:4165: $? = 0
configure:4184: result: yes
configure:4220: checking for fcntl.h
configure:4227: result: yes
configure:4112: checking curses.h usability
configure:4125: gcc -c -g -O2 conftest.c >&5
configure:4128: $? = 0
configure:4131: test -s conftest.o
configure:4134: $? = 0
configure:4144: result: yes
configure:4148: checking curses.h presence
configure:4159: /usr/bin/gcc -E conftest.c
configure:4165: $? = 0
configure:4184: result: yes
configure:4220: checking for curses.h
configure:4227: result: yes
configure:4241: checking whether time.h and sys/time.h may both be included
configure:4267: gcc -c -g -O2 conftest.c >&5
configure:4270: $? = 0
configure:4273: test -s conftest.o
configure:4276: $? = 0
configure:4287: result: yes
configure:4302: checking for acos in -lm
configure:4333: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4336: $? = 0
configure:4339: test -s conftest
configure:4342: $? = 0
configure:4354: result: yes
configure:4379: checking for strcpy
configure:4429: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4428: warning: conflicting types for built-in function `strcpy'
configure:4432: $? = 0
configure:4435: test -s conftest
configure:4438: $? = 0
configure:4449: result: yes
configure:4379: checking for strcat
configure:4429: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4429: warning: conflicting types for built-in function `strcat'
configure:4432: $? = 0
configure:4435: test -s conftest
configure:4438: $? = 0
configure:4449: result: yes
configure:4379: checking for strcasecmp
configure:4429: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4432: $? = 0
configure:4435: test -s conftest
configure:4438: $? = 0
configure:4449: result: yes
configure:4486: checking for malloc
configure:4536: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4539: $? = 0
configure:4542: test -s conftest
configure:4545: $? = 0
configure:4556: result: yes
configure:4486: checking for calloc
configure:4536: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4539: $? = 0
configure:4542: test -s conftest
configure:4545: $? = 0
configure:4556: result: yes
configure:4486: checking for strtod
configure:4536: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4539: $? = 0
configure:4542: test -s conftest
configure:4545: $? = 0
configure:4556: result: yes
configure:4486: checking for strtol
configure:4536: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4539: $? = 0
configure:4542: test -s conftest
configure:4545: $? = 0
configure:4556: result: yes
configure:4587: checking for access
configure:4637: gcc -o conftest -g -O2 conftest.c -lm >&5
configure:4640: $? = 0
configure:4643: test -s conftest
configure:4646: $? = 0
configure:4657: result: yes
configure:7366: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by config.status, which was
generated by GNU Autoconf 2.57. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on shaw
config.status:647: creating Makefile
config.status:751: creating ../include/t3d_cfg.h
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_build_alias=x86_64-unknown-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_c_const=yes
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/usr/bin/gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=set
ac_cv_env_CXX_value=/usr/bin/g++
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_func_access=yes
ac_cv_func_calloc=yes
ac_cv_func_malloc=yes
ac_cv_func_strcasecmp=yes
ac_cv_func_strcat=yes
ac_cv_func_strcpy=yes
ac_cv_func_strtod=yes
ac_cv_func_strtol=yes
ac_cv_header_ctype_h=yes
ac_cv_header_curses_h=yes
ac_cv_header_fcntl_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_math_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdio_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_time_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_sys_utsname_h=yes
ac_cv_header_time=yes
ac_cv_header_time_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_host_alias=x86_64-unknown-linux-gnu
ac_cv_lib_m_acos=yes
ac_cv_objext=o
ac_cv_path_M4=/usr/bin/m4
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_CPP='/usr/bin/gcc -E'
ac_cv_prog_ac_ct_CC=/usr/bin/gcc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_egrep='grep -E'
ac_cv_prog_make_make_set=yes
ac_cv_prog_rslt=yes
ac_cv_search_strerror='none required'
## ----------------- ##
## Output variables. ##
## ----------------- ##
CC='gcc '
CFLAGS=''
CKIT_INCLUDES=''
CKIT_LIB=''
CPP='/usr/bin/gcc -E'
CPPFLAGS=''
CXX='/usr/bin/g++'
CXXCPP=''
CXXFLAGS=''
DEFS='-DHAVE_CONFIG_H'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='grep -E'
ELIXIR_INCLUDES=''
ELIXIR_LIBS=''
EXEEXT=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LDFLAGS=''
LIBOBJS=''
LIBS='-lm '
LN_S='ln -s'
LTLIBOBJS=''
M4='/usr/bin/m4'
OBJEXT='o'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
RANLIB='ranlib'
SET_MAKE=''
SHELL='/bin/sh'
T3D_INCLUDES='-I../include'
T3D_LIB='libt3d.a'
X_CFLAGS=''
X_EXTRA_LIBS=''
X_LIBS=''
X_PRE_LIBS=''
ac_ct_CC='/usr/bin/gcc'
ac_ct_CXX=''
ac_ct_RANLIB='ranlib'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${prefix}/share'
exec_prefix='${prefix}'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
includedir='${prefix}/include'
infodir='${prefix}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
prefix='/usr/local'
program_transform_name='s,x,x,'
rslt='yes'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
srcdir='.'
sysconfdir='${prefix}/etc'
target_alias=''
top_srcdir=''
x_includes='NONE'
x_libraries='NONE'
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define HAVE_ACCESS 1
#define HAVE_CALLOC 1
#define HAVE_CTYPE_H 1
#define HAVE_CURSES_H 1
#define HAVE_FCNTL_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_LIBM 1
#define HAVE_MALLOC 1
#define HAVE_MATH_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STDINT_H 1
#define HAVE_STDIO_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRCASECMP 1
#define HAVE_STRCAT 1
#define HAVE_STRCPY 1
#define HAVE_STRINGS_H 1
#define HAVE_STRING_H 1
#define HAVE_STRTOD 1
#define HAVE_STRTOL 1
#define HAVE_SYS_STAT_H 1
#define HAVE_SYS_TIME_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_UTSNAME_H 1
#define HAVE_TIME_H 1
#define HAVE_UNISTD_H 1
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define STDC_HEADERS 1
#define TIME_WITH_SYS_TIME 1
#define WANT_COINCIDE 1
#define WANT_GRAPHICS_OUTPUT 1
#define WANT_OUTPUT_NEIGHBOUR 1
#define WANT_TIMING 1
#define WANT_VIOLATION 1
configure: exit 0