Differences

This shows you the differences between two versions of the page.

--- playground:tempjim [2014/08/27 22:58] – jim_brouzoulis
+++ playground:tempjim [2014/08/28 21:53] (current) – jim_brouzoulis
@@ Line 1: / Line 1: @@
+\(
+   \renewcommand{\b}[1]{\mathbf{#1}}
+\)
+$$\b{a}_{\rm{i}} \rm{b} b$$
 ====== Implementation of a linear plane stress triangle ======
 This tutorial will describe the implementation of a standard plane stress triangle with linear approximation of the displacement field.
@@ Line 5: / Line 10: @@
 with the internal and external force vectors respectively
-$$\mathbf{f}_{\mathrm{int}} = \int_V \mathbf{B}^{\mathrm{T}} \mathbf{\sigma} \ \mathrm{d}V $$
+$$\b{f}_{\rm{int}} = \int_V \b{B}^{\rm{T}} \b{\sigma} \ \rm{d}V $$
-$$\mathbf{f}_{\mathrm{ext}} = \int_V \mathbf{N}^{\mathrm{T}} \mathbf{b} \ \mathrm{d}V
+$$\b{f}_{\rm{ext}} = \int_V \b{N}^{\rm{T}} \b{b} \ \rm{d}V
-+ \int_{\Gamma} \mathbf{N}^{\mathrm{T}} \mathbf{t} \ \mathrm{d}\Gamma $$
++ \int_{\Gamma} \b{N}^{\rm{T}} \b{t} \ \rm{d}\Gamma $$
 The default solution procedure for solving the equations are a Newton-Rapshon scheme and for this the tangent stiffness matrix is needed,
 computed as
 $$\mathbf{K} = \int_V \mathbf{B}^{\mathrm{T}} \mathbf{D} \mathbf{B} \ \mathrm{d}V $$
 Since the FE equations for all standard continuum elements (2D plane stress/strain, 3D, etc.) are equal, much
 of the element implementations are placed in the base class ''NonLinStructuralElement'' (or ''StructuralElement'' for purely linear problems).
+For example, this base class implements methods to compute the internal and external load vector together with the tangent stiffnes matrix (all as defined above).
-For example, this base class implements methods to compute the internal and external load vector together with the tangent stiffnes matrix.
+The main question that arises is then: what must a new element implement? In short it is everything that is element specific, such as
-hat the specific element needs to implement or specify are the following:
+the following:
   * \(\mathbf{N}\) and \(\mathbf{B}\) matrices
-  * An integration rule (number of integration points etc.)
+    * These depends on the number of nodes and the number o dofs stored in each node.
+  * An integration rule
+    * This defines what type of integration alogorithm (Gauss, Newton-Cotes, Lobatto), the number of integration points,
+    * if there should be several algorithms to support reduced integration for example.
   * Compute the differential volume element \(\Delta V \) and \(\Delta \Gamma \)
@@ Line 135: / Line 142: @@
     virtual int testElementExtension(ElementExtension ext) { return ( ( ext == Element_EdgeLoadSupport ) ? 1 : 0 ); }
 </code>
+<file - BasicElement.C>
+</file>
+<file - BasicElement.h>
+</file>
+===== Problem representation - Engineering model =====
+The concept "engineering model" is an abstraction for the problem under
+consideration. It represents the type of analysis to be performed (e.g. static structural, transient heat flow, etc.).
+The base class ''EngngModel'' declares and implements the basic services for assembling
+characteristic components and services for starting the solution step and
+its termination. Derived classes ``know'' the form of governing
+equation and the physical meaning of  particular components.
+They are responsible for forming the governing equation for each solution
+step,  usually by summing contributions from particular elements and
+nodes.ecific load type dependent
+services and implement all necessary services.