Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.
Currently locked by: 18.219.8.51
Lock expires at: 2025/04/30 16:22 (15 min)
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== This is a list of publications containing results achieved with the help of OOFEM  =====
Please add information about your publications in this section. This section will serve many purposes, but in particular, in forming a community of users who can interact with each other.
  * B. Patzák and D. Rypl. Object-oriented, parallel finite element framework with dynamic load balancing. Advances in Engineering Software, 47(1):35 -- 50, 2012.
  * D. Rypl and B. Patzák: From the finite element analysis to the isogeometric analysis in an object oriented computing environment, Advances in Engineering Software, 44(1):116 -- 125, 2012. doi:10.1016/j.advengsoft.2011.05.032.
  * V. Šmilauer, C.G. Hoover, Z.P. Bažant, F.C. Caner, A.M. Waas, K.W. Shahwan: Multiscale simulation of fracture of braided composites via repetitive unit cells. Engineering Fracture Mechanics, 78(6), 901-918. ISSN 0013-7944, 2011.
  * Z. Hora and B. Patzák.  Analysis of long-term behaviour of nuclear reactor containment.  Nuclear Engineering and Design, 273(3):253--259, February 2007.
  * B. Patzák and Z. Bittnar. Modeling of fresh concrete flow. Computers and Structures, 87(15-16), 962-969, Aug 2009.
  * D. Rypl and B. Patzák.  An object oriented framework for isogeometric analysis. In B. H. V. Topping, L. F. Costa Neves, and R. C. Barros, editors,  Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Stirlingshire, United Kingdom, 2009. Civil-Comp Press. paper 277.
  * B. Patzák and D. Rypl. Parallel adaptive finite element computations with dynamic load balancing. In B. H. V. Topping, L. F. Costa Neves, and R. C. Barros, editors, Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Stirlingshire, United Kingdom, 2009. Civil-Comp Press. paper 114.
  * B. Patzák and D. Rypl. A framework for parallel adaptive finite element computations with dynamic load balancing. In B. H. V. Topping, editor, CD-ROM Proceedings of the First International Conference on Parallel, Distributed and Grid Computing for Engineering, Pecs, Hungary, 2009. Civil-Comp Press. ISSN: 1759-3433, ISBN: 978-1-905088-29-4.
  * B. Patzák and Z. Bittnar. Simulation of fresh concrete flow with level set method. In B. H. V. Topping, editor, CD-ROM Proceedings of the Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, 2007. Civil-Comp Press. Paper 218, ISBN: 978-1-905088-17-1.
  * R. Chamrová and B. Patzák. Object-oriented programming and the Extended FEM. Proceedings of the ICE - Engineering and Computational Mechanics, ISSN: 1755-0777, E-ISSN: 1755-0785, accepted.
  * D. Rypl and B. Patzák. Object Oriented Framework for the Isogeometric Analysis. Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing [CD-ROM]. Stirling: Civil-Comp Press Ltd, 2009, vol. 1, ISBN 978-1-905088-31-7. 2009
  * M. Hlavačka - J. Vorel (supervisor) - M. Šejnoha (opon.). Damage of buildings induced by tunelling (Poruchy budov způsobené tunelováním) (in czech), Master thesis, Czech Technical University in Prague, Faculty of Civil Engineering, 2012