oofem-wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

--===== This is a list of publications containing results achieved with the help of OOFEM  =====
Please add information about your publications in this section. This section will serve many purposes, but in particular, in forming a community of users who can interact with each other.
  * I.P. Christovasilis , L. Riparbelli, G. Rinaldin, G. Tamagnone: Methods for Practice-oriented Linear Analysis in Seismic Design of Cross Laminated Timber Buildings. Soil Dynamics and Earthquake Engineering, 128, 2020, doi.org/10.1016/j.soildyn.2019.105869.
  * V. Šmilauer, P. Havlásek, T. Mareš, B. Patzák: ConTemp - thermomechanical simulator for hydrating massive concrete blocks. Software licenced to LafargeHolcim Ltd., 2016.
  * V. Šmilauer, L. Baquerizo, T. Matschei, P. Havlásek, L. W. Da Silva, K. Hájková: ConTemp – A virtual thermo-mechanical simulator for hydrating reinforced concrete blocks with extension to service life. In: Service Life of Cement-Based Materials and Structures. Materials, Systems and Structures in Civil Engineering 2016. Lyngby, 21.08.2016 - 24.08.2016. Bagneux: Rilem Publications s.a.r.l.. 2016, pp. 463-472. ISBN 978-2-35158-172-8.
  * M. Hlobil, V. Šmilauer, and G. Chanvillard: Micromechanical multiscale fracture model for compressive strength of blended cement pastes. Cement and Concrete Research. 2016, 83, pp. 188-202. ISSN 0008-8846.
  * W. R. L. Da Silva and V. Šmilauer: Nomogram for Maximum Temperature of Mass Concrete. Concrete International. 2015, 35(5), pp. 30-36. ISSN 0162-4075.
  * W. R. L. Da Silva and V. Šmilauer and P. Štemberk: Upscaling semi-adiabatic measurements for simulating temperature evolution of mass concrete structures. Materials and Structures. 2015, 48(4), pp. 1031-1041. ISSN 1359-5997.
  * V. Šmilauer et al. Využití úletových popílků pro betonáž masivních konstrukcí. BETON-technologie, konstrukce, sanace. 2014, 14(2), pp. 60-65. ISSN 1213-3116.
  * V. Šmilauer, P. Hlaváček, and P. Padevět: Micromechanical Analysis of Cement Paste with Carbon Nanotubes. Acta Polytechnica. 2012, 52(6), pp. 35-41. ISSN 1210-2709.
  * D. Rypl and B. Patzák: Construction of weighted dual graphs of nurbs-based isogeometric  meshes, Advances in Engineering Software, 60-61:31--41, 2013.
   * B. Patzák, D. Rypl, and J. Kruis: Mupif – a distributed multi-physics integration tool, Advances in Engineering Software, 60–61(0):89 -- 97, 2013.
   * A. Pospíšilová, M. Lepš, D. Rypl, and B. Patzák: Shape optimization using isogeometric analysis and particle  swarm optimization, In B.H.V. Topping, editor, Proceedings of the Eleventh  International Conference on Computational Structures Technology,  Stirlingshire, United Kingdom, 2012. Civil-Comp Press. paper 220.
   * M. Horák and B. Patzák: Object oriented design of a coupled, multi-physics finite  element kernel, In B.H.V. Topping, editor, Proceedings of the Eleventh  International Conference on Computational Structures Technology,  Stirlingshire, United Kingdom, 2012. Civil-Comp Press. paper 255.
   * F. Kolařík, B. Patzák: Modeling of Fiber Orientation in Fiber-Reinforced Fresh Concrete Flow, In  Engineering Mechanics 2013, Svratka, 279--289, isbn: 978-80-87012-47-5, 2013.
   * F. Kolařík, B. Patzák: Modeling of Fiber Orientation in Viscous Fluid Flow with Application to Self-Compacting Concrete, 11th International Conference of Numerical Analysis and Applied Mathematics 2013,  Rhodos , isbn:978-0-7354-1184-5, 2013.
  * M. Charlebois, H. Motallebzadeh, W. Funnell: Visco-hyperelastic law for finite deformations: a frequency analysis, Biomechanics and Modeling in Mechanobiology, DOI: 10.1007/s10237-012-0435-2, 2012.
  * B. Patzák and D. Rypl. Object-oriented, parallel finite element framework with dynamic load balancing. Advances in Engineering Software, 47(1):35 -- 50, 2012.
  * M. Hlavačka - J. Vorel (supervisor) - M. Šejnoha (opon.). Damage of buildings induced by tunelling (Poruchy budov způsobené tunelováním) (in czech), Master thesis, Czech Technical University in Prague, Faculty of Civil Engineering, 2012
  * D. Rypl and B. Patzák: From the finite element analysis to the isogeometric analysis in an object oriented computing environment, Advances in Engineering Software, 44(1):116 -- 125, 2012. doi:10.1016/j.advengsoft.2011.05.032.
  * V. Šmilauer, C.G. Hoover, Z.P. Bažant, F.C. Caner, A.M. Waas, K.W. Shahwan: Multiscale simulation of fracture of braided composites via repetitive unit cells. Engineering Fracture Mechanics, 78(6), 901-918. ISSN 0013-7944, 2011.
  * Z. Hora and B. Patzák.  Analysis of long-term behaviour of nuclear reactor containment.  Nuclear Engineering and Design, 273(3):253--259, February 2007.
  * B. Patzák and Z. Bittnar. Modeling of fresh concrete flow. Computers and Structures, 87(15-16), 962-969, Aug 2009.
  * D. Rypl and B. Patzák.  An object oriented framework for isogeometric analysis. In B. H. V. Topping, L. F. Costa Neves, and R. C. Barros, editors,  Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Stirlingshire, United Kingdom, 2009. Civil-Comp Press. paper 277.
  * B. Patzák and D. Rypl. Parallel adaptive finite element computations with dynamic load balancing. In B. H. V. Topping, L. F. Costa Neves, and R. C. Barros, editors, Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Stirlingshire, United Kingdom, 2009. Civil-Comp Press. paper 114.
  * B. Patzák and D. Rypl. A framework for parallel adaptive finite element computations with dynamic load balancing. In B. H. V. Topping, editor, CD-ROM Proceedings of the First International Conference on Parallel, Distributed and Grid Computing for Engineering, Pecs, Hungary, 2009. Civil-Comp Press. ISSN: 1759-3433, ISBN: 978-1-905088-29-4.
  * B. Patzák and Z. Bittnar. Simulation of fresh concrete flow with level set method. In B. H. V. Topping, editor, CD-ROM Proceedings of the Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, 2007. Civil-Comp Press. Paper 218, ISBN: 978-1-905088-17-1.
  * R. Chamrová and B. Patzák. Object-oriented programming and the Extended FEM. Proceedings of the ICE - Engineering and Computational Mechanics, ISSN: 1755-0777, E-ISSN: 1755-0785, accepted.
  * D. Rypl and B. Patzák. Object Oriented Framework for the Isogeometric Analysis. Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing [CD-ROM]. Stirling: Civil-Comp Press Ltd, 2009, vol. 1, ISBN 978-1-905088-31-7. 2009

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International