User Tools

Site Tools


tailorcrete:examples:dra_wall_01

This is an old revision of the document!


Pipe casting from side

Description of the problem

The whole simulation is modeled as a 2D problem. On the threee pictures below, geometry, computational model and mesh of the wall is shown.

Fig. 1.a: Geometry and dimensions Fig. 1.b: Computational model Fig. 1.c: Computational mesh


In case of pipe casting from the side, concrete is filled in through the pipe, as it is shown at Fig. 1.b. Diameter of the pipe is 0.1 m (note, that is modeled as a 2D problem). Concrete is filled in with prescribed velocity equal to 0.2 m/s. It is modeled fith no-friction boundary condition on any wall. Boundary conditions on the holes are prescribed in local coordinate system where normal component of velocity is forbidden and tangent component is free. Material parameters of used concrete are:

  • yield stress 50 [Pa]
  • plastic viscosity 50 [Pa*s]
  • densty 2300 [kg/m3]

Streamlines at different stages of solutions

Principal directions of deviatoric strain

Magnitudes of deviatoric strain

Video of casting simulation

http://www.oofem.org/wiki/lib/exe/fetch.php

Bottom casting from center

Description of the problem

In this case, filling is modeled from the bottom center of the wall. Again, pictures of computational mesh and model are on the pictures below.

Fig. 2.a: Computational model Fig. 2.b: Computational mesh


In case of pipe casting from the side, concrete is filled in through the pipe, as it is shown at Fig. 1.b. Diameter of the pipe is 0.1 m (note, that is modeled as a 2D problem). Concrete is filled in with prescribed velocity equal to 0.2 m/s. It is modeled fith no-friction boundary condition on any wall. Boundary conditions on the holes are prescribed in local coordinate system where normal component of velocity is forbidden and tangent component is free.

Streamlines at different stages of solutions

Principal directions of deviatoric strain

Magnitudes of deviatoric strain

Video of casting simulation

http://www.oofem.org/wiki/lib/exe/fetch.php
tailorcrete/examples/dra_wall_01.1352897706.txt.gz · Last modified: 2012/11/14 13:55 by kolarfil