Differences

This shows you the differences between two versions of the page.

--- unv2oofem:unv2oofem [2017/02/01 15:53] – smilauer
+++ unv2oofem:unv2oofem [2017/02/01 17:37] – smilauer
@@ Line 92: / Line 92: @@
 ==== Extension for sets ====
-Boundary conditions, material assignment can be handled via sets. Salome needs to define groups on which those sets will operate.
+Boundary conditions and material assignments can be handled via sets. Salome needs to define groups on which those sets will operate.
+{{:unv2oofem:exam.zip|The control file}} looks like
+<code text>
+exam-sets.out
+This example shows how to convert unv file to OOFEM input file. It will use sets.
+linearstatic nsteps 1 nmodules 1
+vtkxml tstep_all domain_all primvars 1 1 vars 2 4 1 stype 1
+domain 2dplanestress
+OutputManager tstep_all dofman_all element_all
+ncrosssect 2 nmat 2 nbc 2 nic 0 nltf 1 nset 4
+SimpleCS 1 thick 1.0 width 1.0 material 1 set 1
+SimpleCS 2 thick 1.0 width 1.0 material 2 set 2
+isole 1 d 0.0 e 15.0 n 0.25 tAlpha 0.0
+isole 2 d 0.0 e 20.0 n 0.25 tAlpha 0.0
+BoundaryCondition 1 loadTimeFunction 1 dofs 2 1 2 values 2 0.0 0.0 set 3
+ConstantEdgeLoad 2 loadTimeFunction 1 dofs 2 1 2 components 2 10.0 0.0 loadType 3 set 4
+ConstantFunction 1 f(t) 1.0
+set 1 elements
+set 2 elements
+set 3 nodes
+set 4 elementedges
+#Comment may be inserted anywhere
+#Data for extractor, if necessary
+#%BEGIN_CHECK% tolerance 1.e-8
+## check reactions
+#REACTION tStep 1 number 1 dof 1
+#NODE tStep 1 number 5 dof 1 unknown d
+#%END_CHECK%
+group load_edge
+elemprop set 4
+etype[11]
+group support_nodes
+nodeprop set 3
+group material_1
+elemprop set 1
+etype[44] PlaneStress2d
+group material_2
+elemprop set 2
+etype[44] PlaneStress2d
+</code>