#include <intelline1intpen.h>

Inheritance diagram for oofem::IntElLine1IntPen:

Collaboration diagram for oofem::IntElLine1IntPen:

Public Member Functions
	IntElLine1IntPen (int n, Domain *d)
const char *	giveInputRecordName () const override
const char *	giveClassName () const override
int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords) override
FloatArrayF< 2 >	computeCovarBaseVectorAt (GaussPoint *gp) const override
void	computeStiffnessMatrix (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) override
void	giveInternalForcesVector (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override
Public Member Functions inherited from oofem::IntElLine1
	IntElLine1 (int n, Domain *d)
FEInterpolation *	giveInterpolation () const override
int	computeNumberOfDofs () override
void	giveDofManDofIDMask (int inode, IntArray &answer) const override
double	computeAreaAround (GaussPoint *gp) override
void	computeTransformationMatrixAt (GaussPoint *gp, FloatMatrix &answer) override
int	testElementExtension (ElementExtension ext) override
Interface *	giveInterface (InterfaceType interface) override
void	NodalAveragingRecoveryMI_computeNodalValue (FloatArray &answer, int node, InternalStateType type, TimeStep *tStep) override
void	initializeFrom (InputRecord &ir, int priority) override
void	postInitialize () override
	Performs post initialization steps.
void	giveEngTraction (FloatArray &answer, GaussPoint gp, const FloatArray &jump, TimeStep tStep) override
void	giveStiffnessMatrix_Eng (FloatMatrix &answer, MatResponseMode rMode, IntegrationPoint ip, TimeStep tStep) override
void	drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep) override
void	drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType) override
void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep) override
Public Member Functions inherited from oofem::StructuralInterfaceElement
	StructuralInterfaceElement (int n, Domain *d)
int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords) override
void	giveCharacteristicMatrix (FloatMatrix &answer, CharType, TimeStep *tStep) override
void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep) override
virtual void	computeTraction (FloatArray &traction, IntegrationPoint ip, const FloatArray &jump, TimeStep tStep)
virtual void	computeSpatialJump (FloatArray &answer, GaussPoint gp, TimeStep tStep)
int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep) override
Interface *	giveInterface (InterfaceType) override
void	updateInternalState (TimeStep *tStep) override
void	updateYourself (TimeStep *tStep) override
int	checkConsistency () override
void	giveInputRecord (DynamicInputRecord &input) override
const char *	giveClassName () const override
StructuralInterfaceCrossSection *	giveInterfaceCrossSection ()
Element_Geometry_Type	giveGeometryType () const override
virtual void	giveFirstPKTraction (FloatArray &answer, GaussPoint gp, const FloatArray &jump, const FloatMatrix &F, TimeStep tStep)
virtual void	giveStiffnessMatrix_dTdj (FloatMatrix &answer, MatResponseMode rMode, IntegrationPoint ip, TimeStep tStep)
Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Element (const Element &src)=delete
Element &	operator= (const Element &src)=delete
virtual	~Element ()
	Virtual destructor.
void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual int	giveNumberOfDofs ()
virtual int	giveNumberOfInternalDofManagers () const
virtual DofManager *	giveInternalDofManager (int i) const
virtual void	setInternalDofManager (int num, std::unique_ptr< DofManager > dm)
virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
virtual void	computeLoadVector (FloatArray &answer, BodyLoad load, CharType type, ValueModeType mode, TimeStep tStep)
virtual void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true)
virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
virtual void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad load, int edge, CharType type, ValueModeType mode, TimeStep tStep, bool global=true)
const IntArray &	giveBodyLoadList () const
const IntArray &	giveBoundaryLoadList () const
void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
virtual int	computeNumberOfGlobalDofs ()
int	computeNumberOfPrimaryMasterDofs ()
virtual bool	computeGtoLRotationMatrix (FloatMatrix &answer)
virtual bool	giveRotationMatrix (FloatMatrix &answer)
virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
virtual void	giveElementDofIDMask (IntArray &answer) const
virtual void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer)
virtual double	computeVolumeAround (GaussPoint *gp)
virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension.
double	computeMeanSize ()
virtual double	computeVolume ()
virtual double	computeArea ()
virtual double	computeLength ()
virtual IntArray	giveBoundaryEdgeNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundarySurfaceNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundaryNodes (int boundary) const
virtual std::unique_ptr< IntegrationRule >	giveBoundaryEdgeIntegrationRule (int order, int boundary)
virtual std::unique_ptr< IntegrationRule >	giveBoundarySurfaceIntegrationRule (int order, int boundary)
int	giveDofManagerNumber (int i) const
const IntArray &	giveDofManArray () const
void	addDofManager (DofManager *dMan)
DofManager *	giveDofManager (int i) const
Node *	giveNode (int i) const
virtual ElementSide *	giveSide (int i) const
virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
virtual const FEInterpolation *	getGeometryInterpolation () const
virtual Material *	giveMaterial ()
int	giveMaterialNumber () const
CrossSection *	giveCrossSection ()
int	getActivityTimeFunctionNumber ()
void	setActivityTimeFunctionNumber (int funcIndx)
void	setMaterial (int matIndx)
virtual void	setCrossSection (int csIndx)
virtual int	giveNumberOfDofManagers () const
void	setNumberOfDofManagers (int i)
	Sets number of element dof managers.
virtual int	giveNumberOfNodes () const
void	setDofManagers (const IntArray &dmans)
void	setDofManager (int id, int dm)
void	setBodyLoads (const IntArray &bodyLoads)
void	setIntegrationRules (std ::vector< std ::unique_ptr< IntegrationRule > > irlist)
virtual integrationDomain	giveIntegrationDomain () const
virtual MaterialMode	giveMaterialMode ()
virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
int	giveRegionNumber ()
virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
virtual bool	isActivated (TimeStep *tStep)
virtual bool	isCast (TimeStep *tStep)
virtual void	initForNewStep ()
virtual Element_Geometry_Type	giveEdgeGeometryType (int id) const
	Returns the receiver edge geometry type.
virtual Element_Geometry_Type	giveSurfaceGeometryType (int id) const
	Returns the receiver surface geometry type.
virtual int	giveSpatialDimension ()
virtual int	giveNumberOfBoundarySides ()
	Returns number of boundaries (entities of element_dimension-1: points, edges, surfaces).
virtual int	giveNumberOfEdges () const
virtual int	giveNumberOfSurfaces () const
virtual int	giveDefaultIntegrationRule () const
virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
int	giveNumberOfIntegrationRules ()
virtual IntegrationRule *	giveIntegrationRule (int i)
std::vector< std ::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()
int	giveGlobalIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicLength (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method)
virtual double	giveParentElSize () const
virtual void	updateBeforeNonlocalAverage (TimeStep *tStep)
virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
virtual int	giveLocalCoordinateSystem (FloatMatrix &answer)
virtual void	giveLocalCoordinateSystemVector (InternalStateType isttype, FloatArray &answer)
virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
virtual int	adaptiveMap (Domain oldd, TimeStep tStep)
virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
virtual int	adaptiveUpdate (TimeStep *tStep)
virtual int	adaptiveFinish (TimeStep *tStep)
void	updateLocalNumbering (EntityRenumberingFunctor &f) override
template<class T>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f.
template<class T, class S>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array.
virtual void	drawYourself (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)
virtual int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep)
virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
virtual void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows sparse structure.
virtual void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness).
int	giveLabel () const
int	giveGlobalNumber () const
void	setGlobalNumber (int num)
elementParallelMode	giveParallelMode () const
void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element.
virtual elementParallelMode	giveKnotSpanParallelMode (int) const
int	packUnknowns (DataStream &buff, TimeStep *tStep)
int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
int	estimatePackSize (DataStream &buff)
const IntArray *	givePartitionList () const
void	setPartitionList (IntArray &pl)
virtual double	predictRelativeComputationalCost ()
virtual double	giveRelativeSelfComputationalCost ()
virtual double	predictRelativeRedistributionCost ()
IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element.
IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element.
void	initializeFinish () override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
void	printOutputAt (FILE file, TimeStep tStep) override
virtual const IntArray	giveLocation ()
virtual void	recalculateCoordinates (int nodeNumber, FloatArray &coords)
void	setSharedEdgeID (int iedge, int globalID)
void	setSharedSurfaceID (int isurf, int globalID)
const IntArray *	giveSharedEdgeIDs () const
const IntArray *	giveSharedSurfaceIDs () const
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	initializeFrom (InputRecord &ir)
virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging.
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).
Public Member Functions inherited from oofem::NodalAveragingRecoveryModelInterface
	NodalAveragingRecoveryModelInterface ()
	Constructor.
Public Member Functions inherited from oofem::Interface
	Interface ()
	Constructor.
virtual	~Interface ()

Protected Member Functions
void	computeNmatrixAt (GaussPoint *gp, FloatMatrix &answer) override
void	computeGaussPoints () override
Element_Geometry_Type	giveGeometryType () const override
Protected Member Functions inherited from oofem::StructuralInterfaceElement
virtual int	giveNumberOfIPForMassMtrxIntegration ()
virtual int	testCrossSectionExtension (CrossSectExtension ext)
int	testElementExtension (ElementExtension ext) override

Additional Inherited Members
Static Public Attributes inherited from oofem::Element
static ParamKey	IPK_Element_mat
static ParamKey	IPK_Element_crosssect
static ParamKey	IPK_Element_nodes
static ParamKey	IPK_Element_bodyload
static ParamKey	IPK_Element_boundaryload
static ParamKey	IPK_Element_lcs
static ParamKey	IPK_Element_partitions
static ParamKey	IPK_Element_remote
static ParamKey	IPK_Element_activityTimeFunction
static ParamKey	IPK_Element_nip
Protected Attributes inherited from oofem::IntElLine1
bool	axisymmode = false
	Flag controlling axisymmetric mode (integration over unit circumferential angle).
Protected Attributes inherited from oofem::StructuralInterfaceElement
FloatArray	initialDisplacements
	Initial displacement vector, describes the initial nodal displacements when element has been casted.
bool	nlGeometry = false
	Flag indicating if geometrical nonlinearities apply.
Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers.
IntArray	dofManArray
	Array containing dofmanager numbers.
int	material
	Number of associated material.
int	crossSection
	Number of associated cross section.
IntArray	bodyLoadArray
IntArray	boundaryLoadArray
std::vector< std ::unique_ptr< IntegrationRule > >	integrationRulesArray
FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation.
int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element.
int	globalNumber
int	numberOfGaussPoints
elementParallelMode	parallel_mode
	Determines the parallel mode of the element.
IntArray	partitions
IntArray	globalEdgeIDs
IntArray	globalSurfaceIDs
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.
Static Protected Attributes inherited from oofem::IntElLine1
static FEI2dLineLin	interp
static ParamKey	IPK_IntElLine1_axisymmode

Detailed Description

This class implements a two dimensional interface element with interior penalty formulation.

Author: Erik Svenning

Definition at line 49 of file intelline1intpen.h.

Constructor & Destructor Documentation

◆ IntElLine1IntPen()

oofem::IntElLine1IntPen::IntElLine1IntPen	(	int	n,
		Domain *	d )

Definition at line 20 of file intelline1intpen.C.

References oofem::IntElLine1::IntElLine1(), oofem::Element::numberOfDofMans, and oofem::Element::numberOfGaussPoints.

Member Function Documentation

◆ computeCovarBaseVectorAt()

FloatArrayF< 2 > oofem::IntElLine1IntPen::computeCovarBaseVectorAt ( GaussPoint * gp ) const

overridevirtual

Reimplemented from oofem::IntElLine1.

Definition at line 62 of file intelline1intpen.C.

References oofem::FloatArrayF< N >::at(), oofem::FloatMatrix::at(), oofem::IntElLine1::giveInterpolation(), oofem::Element::giveNode(), and oofem::IntElLine1::interp.

◆ computeGaussPoints()

void oofem::IntElLine1IntPen::computeGaussPoints ( )

overrideprotectedvirtual

Initializes the array of integration rules member variable. Element can have multiple integration rules for different tasks. For example structural element family class uses this feature to implement transparent support for reduced and selective integration of some strain components. Must be defined by terminator classes.

See also: IntegrationRule

Reimplemented from oofem::IntElLine1.

Definition at line 495 of file intelline1intpen.C.

References oofem::Element::integrationRulesArray.

◆ computeGlobalCoordinates()

int oofem::IntElLine1IntPen::computeGlobalCoordinates	(	FloatArray &	answer,
		const FloatArray &	lcoords )

overridevirtual

Computes the global coordinates from given element's local coordinates.

Parameters

answer	Requested global coordinates.
lcoords	Local coordinates.

Returns: Nonzero if successful, zero otherwise.

Reimplemented from oofem::Element.

Definition at line 26 of file intelline1intpen.C.

References oofem::FloatArray::add(), oofem::FloatArray::at(), oofem::Element::giveDofManager(), oofem::IntElLine1::giveInterpolation(), oofem::IntElLine1::interp, N, oofem::FloatArray::resize(), and oofem::FloatArray::zero().

◆ computeNmatrixAt()

void oofem::IntElLine1IntPen::computeNmatrixAt	(	GaussPoint *	gp,
		FloatMatrix &	answer )

overrideprotectedvirtual

Computes modified interpolation matrix (N) for the element which multiplied with the unknowns vector (u) produces the spatial jump.

Parameters

gp	Integration point for which answer is assembled.
answer	Interpolation matrix evaluated at gp.

Reimplemented from oofem::IntElLine1.

Definition at line 454 of file intelline1intpen.C.

References oofem::FloatMatrix::at(), oofem::IntElLine1::giveInterpolation(), oofem::GaussPoint::giveNaturalCoordinate(), oofem::IntElLine1::interp, N, oofem::FloatMatrix::resize(), and oofem::FloatMatrix::zero().

Referenced by computeStiffnessMatrix(), and giveInternalForcesVector().

◆ computeStiffnessMatrix()

void oofem::IntElLine1IntPen::computeStiffnessMatrix	(	FloatMatrix &	answer,
		MatResponseMode	rMode,
		TimeStep *	tStep )

overridevirtual

Computes the stiffness/tangent matrix of receiver. Default implementation computes element stiffness using \( K=\int_{\Gamma} N^{\mathrm{T}} D N \mathrm{d}V \) formulae, where \( N \) is the element geometric matrix such that \( j = N a \) and \( D \) is the stiffness matrix of the interface material. Numerical integration procedure uses integrationRulesArray for numerical integration.

The geometrical matrix is obtained using computeNmatrixAt service and the constitutive matrix is obtained using computeConstitutiveMatrixAt service.

For higher numerical performance, only one half of stiffness matrix is computed and answer is then symmetrized. Therefore, if element matrix will be generally nonsymmetric, one must specialize this method. Finally, the result is transformed into global coordinate system (or nodal coordinate system, if it is defined).

Parameters

answer	Computed stiffness matrix (symmetric).
rMode	Response mode.
tStep	Time step.

Reimplemented from oofem::StructuralInterfaceElement.

Definition at line 92 of file intelline1intpen.C.

References oofem::FloatMatrix::add(), oofem::FloatMatrix::beProductOf(), oofem::FloatMatrix::clear(), oofem::IntElLine1::computeAreaAround(), computeNmatrixAt(), oofem::IntElLine1::computeTransformationMatrixAt(), oofem::Element::giveCrossSection(), oofem::Element::giveDefaultIntegrationRulePtr(), oofem::StructuralInterfaceElement::giveStiffnessMatrix_dTdj(), oofem::IntElLine1::giveStiffnessMatrix_Eng(), N, oofem::StructuralInterfaceElement::nlGeometry, OOFEM_ERROR, oofem::FloatMatrix::plusProductSymmUpper(), oofem::FloatMatrix::plusProductUnsym(), oofem::FloatMatrix::rotatedWith(), oofem::FloatMatrix::symmetrized(), and oofem::FloatMatrix::times().

◆ giveClassName()

const char * oofem::IntElLine1IntPen::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Reimplemented from oofem::IntElLine1.

Definition at line 55 of file intelline1intpen.h.

◆ giveGeometryType()

Element_Geometry_Type oofem::IntElLine1IntPen::giveGeometryType ( ) const

inlineoverrideprotectedvirtual

Returns the element geometry type. This information is assumed to be of general interest, but it is required only for some specialized tasks.

Returns: Geometry type of element.

Reimplemented from oofem::IntElLine1.

Definition at line 102 of file intelline1intpen.h.

◆ giveInputRecordName()

const char * oofem::IntElLine1IntPen::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Reimplemented from oofem::IntElLine1.

Definition at line 54 of file intelline1intpen.h.

References _IFT_IntElLine1IntPen_Name.

◆ giveInternalForcesVector()

void oofem::IntElLine1IntPen::giveInternalForcesVector	(	FloatArray &	answer,
		TimeStep *	tStep,
		int	useUpdatedGpRecord = 0 )

overridevirtual

Returns equivalent nodal forces vectors. Useful for nonlinear analysis. Default implementation computes result as \( F=\int_v B^{\mathrm{T}} \sigma \mathrm{d}V \), where \( \sigma \) is the real element stress vector obtained using computeStressVector service (if useUpdatedGpRecord=0) or (if useUpdatedGpRecord=1) from integration point status. The geometric matrix is obtained using computeBmatrixAt service. Integration is performed using default integration rule, which should produce always valid results, assuming that strains used for computation of stresses are valid.

Parameters

answer	Internal nodal forces vector.
tStep	Time step.
useUpdatedGpRecord	If equal to zero, the stresses in integration points are computed (slow but safe), else if nonzero the stresses are taken directly from integration point status (should be derived from StructuralMaterialStatus) (fast, but engineering model must ensure valid status data in each integration point).

Reimplemented from oofem::StructuralInterfaceElement.

Definition at line 266 of file intelline1intpen.C.

References oofem::FloatArray::add(), oofem::FloatMatrix::add(), oofem::FloatArray::beProductOf(), oofem::FloatArray::clear(), oofem::FloatMatrix::clear(), oofem::IntElLine1::computeAreaAround(), computeNmatrixAt(), oofem::StructuralInterfaceElement::computeTraction(), oofem::Element::computeVectorOf(), oofem::Element::giveDefaultIntegrationRulePtr(), oofem::StructuralInterfaceElement::initialDisplacements, N, oofem::FloatArray::plusProduct(), oofem::FloatArray::subtract(), oofem::FloatArray::times(), and oofem::FloatMatrix::times().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IntElLine1IntPen()

Member Function Documentation

◆ computeCovarBaseVectorAt()

◆ computeGaussPoints()

◆ computeGlobalCoordinates()

◆ computeNmatrixAt()

◆ computeStiffnessMatrix()

◆ giveClassName()

◆ giveGeometryType()

◆ giveInputRecordName()

◆ giveInternalForcesVector()