#include <intmatbilinearcz.h>

Inheritance diagram for oofem::IntMatBilinearCZ:

Collaboration diagram for oofem::IntMatBilinearCZ:

Public Member Functions
	IntMatBilinearCZ (int n, Domain *d)
const char *	giveClassName () const override
const char *	giveInputRecordName () const override
FloatArrayF< 3 >	giveFirstPKTraction_3d (const FloatArrayF< 3 > &jump, const FloatMatrixF< 3, 3 > &F, GaussPoint gp, TimeStep tStep) const override
FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_dTdj (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const override
bool	hasAnalyticalTangentStiffness () const override
void	initializeFrom (InputRecord &ir) override
void	giveInputRecord (DynamicInputRecord &input) override
std::unique_ptr< MaterialStatus >	CreateStatus (GaussPoint *gp) const override
void	printYourself () override
	Prints receiver state on stdout. Useful for debugging.
Public Member Functions inherited from oofem::StructuralInterfaceMaterial
	StructuralInterfaceMaterial (int n, Domain *d)
virtual double	giveFirstPKTraction_1d (double jump, double reducedF, GaussPoint gp, TimeStep tStep) const
virtual FloatArrayF< 2 >	giveFirstPKTraction_2d (const FloatArrayF< 2 > &jump, const FloatMatrixF< 2, 2 > &reducedF, GaussPoint gp, TimeStep tStep) const
virtual double	giveEngTraction_1d (double jump, GaussPoint gp, TimeStep tStep) const
virtual FloatArrayF< 2 >	giveEngTraction_2d (const FloatArrayF< 2 > &jump, GaussPoint gp, TimeStep tStep) const
virtual FloatArrayF< 3 >	giveEngTraction_3d (const FloatArrayF< 3 > &jump, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_dTdj (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_dTdj (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_Eng (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_Eng (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_Eng (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_dTdj_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_dTdj_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_dTdj_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_Eng_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_Eng_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_Eng_Num (GaussPoint gp, TimeStep tStep) const
void	initializeFrom (InputRecord &ir) override
void	giveInputRecord (DynamicInputRecord &input) override
virtual FloatArray	giveInterfaceStrength ()
int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep) override
Public Member Functions inherited from oofem::Material
	Material (int n, Domain *d)
virtual	~Material ()=default
	Destructor.
virtual bool	isCharacteristicMtrxSymmetric (MatResponseMode rMode) const
virtual void	giveCharacteristicMatrix (FloatMatrix &answer, MatResponseMode type, GaussPoint gp, TimeStep tStep) const
	Returns characteristic matrix of the receiver.
virtual void	giveCharacteristicVector (FloatArray &answer, FloatArray &flux, MatResponseMode type, GaussPoint gp, TimeStep tStep) const
	Returns characteristic vector of the receiver.
virtual double	giveCharacteristicValue (MatResponseMode type, GaussPoint gp, TimeStep tStep) const
	Returns characteristic value of the receiver.
virtual double	give (int aProperty, GaussPoint *gp) const
virtual bool	hasProperty (int aProperty, GaussPoint *gp) const
virtual void	modifyProperty (int aProperty, double value, GaussPoint *gp)
double	giveCastingTime () const
virtual bool	isActivated (TimeStep *tStep) const
virtual bool	hasMaterialModeCapability (MaterialMode mode) const
virtual bool	hasCastingTimeSupport () const
virtual int	setIPValue (const FloatArray &value, GaussPoint *gp, InternalStateType type)
void	printYourself () override
	Prints receiver state on stdout. Useful for debugging.
virtual void	saveIPContext (DataStream &stream, ContextMode mode, GaussPoint *gp)
virtual void	restoreIPContext (DataStream &stream, ContextMode mode, GaussPoint *gp)
int	checkConsistency () override
virtual void	restoreConsistency (GaussPoint *gp)
virtual int	initMaterial (Element *element)
virtual MaterialStatus *	giveStatus (GaussPoint *gp) const
virtual int	packUnknowns (DataStream &buff, TimeStep tStep, GaussPoint ip)
virtual int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep tStep, GaussPoint ip)
virtual int	estimatePackSize (DataStream &buff, GaussPoint *ip)
virtual double	predictRelativeComputationalCost (GaussPoint *gp)
virtual double	predictRelativeRedistributionCost (GaussPoint *gp)
virtual void	initTempStatus (GaussPoint *gp) const
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
virtual void	initializeFrom (InputRecord &ir, int priority)
virtual void	initializeFinish ()
virtual void	postInitialize ()
	Performs post initialization steps. Called after all components are created and initialized.
virtual void	printOutputAt (FILE file, TimeStep tStep)
virtual Interface *	giveInterface (InterfaceType t)
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).

Protected Member Functions
int	checkConsistency () override

Protected Attributes
double	mPenaltyStiffness = 0.
double	mGIc = 0.
double	mGIIc = 0.
double	mSigmaF = 0.
double	mMu = 0.
double	mGamma = 0.
bool	mSemiExplicit = false
Protected Attributes inherited from oofem::Material
Dictionary	propertyDictionary
double	castingTime
int	preCastingTimeMat
	Material existing before casting time - optional parameter, zero by default.
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.

Private Member Functions
double	computeYieldFunction (double iTractionNormal, double iTractionTang) const
FloatArrayF< 3 >	computeTraction (const FloatArrayF< 3 > &iTTrial, double iPlastMultInc) const

Additional Inherited Members
Public Attributes inherited from oofem::StructuralInterfaceMaterial
bool	useNumericalTangent

Detailed Description

Bilinear cohesive zone model. Created on: Oct 20, 2013

Author: Erik Svenning

Definition at line 93 of file intmatbilinearcz.h.

Constructor & Destructor Documentation

◆ IntMatBilinearCZ()

oofem::IntMatBilinearCZ::IntMatBilinearCZ	(	int	n,
		Domain *	d )

Definition at line 94 of file intmatbilinearcz.C.

References oofem::StructuralInterfaceMaterial::StructuralInterfaceMaterial().

Member Function Documentation

◆ checkConsistency()

int oofem::IntMatBilinearCZ::checkConsistency ( void )

overrideprotectedvirtual

Allows programmer to test some internal data, before computation begins. For example, one may use this function, to ensure that element has material with required capabilities is assigned to element. This must be done after all mesh components are instanciated.

Returns: Nonzero if receiver is consistent.

Reimplemented from oofem::FEMComponent.

Definition at line 98 of file intmatbilinearcz.C.

◆ computeTraction()

FloatArrayF< 3 > oofem::IntMatBilinearCZ::computeTraction	(	const FloatArrayF< 3 > &	iTTrial,
		double	iPlastMultInc ) const

private

Definition at line 252 of file intmatbilinearcz.C.

References oofem::FloatArrayF< N >::at(), mGamma, mGIc, mGIIc, mPenaltyStiffness, and mSigmaF.

Referenced by giveFirstPKTraction_3d().

◆ computeYieldFunction()

double oofem::IntMatBilinearCZ::computeYieldFunction	(	double	iTractionNormal,
		double	iTractionTang ) const

private

Definition at line 245 of file intmatbilinearcz.C.

References oofem::max(), mGamma, mMu, and mSigmaF.

Referenced by giveFirstPKTraction_3d().

◆ CreateStatus()

std::unique_ptr< MaterialStatus > oofem::IntMatBilinearCZ::CreateStatus ( GaussPoint * gp ) const

inlineoverridevirtual

Creates new copy of associated status and inserts it into given integration point.

Parameters

gp	Integration point where newly created status will be stored.

Returns: Reference to new status.

Reimplemented from oofem::Material.

Definition at line 130 of file intmatbilinearcz.h.

◆ give3dStiffnessMatrix_dTdj()

FloatMatrixF< 3, 3 > oofem::IntMatBilinearCZ::give3dStiffnessMatrix_dTdj	(	MatResponseMode	rMode,
		GaussPoint *	gp,
		TimeStep *	tStep ) const

overridevirtual

Reimplemented from oofem::StructuralInterfaceMaterial.

Definition at line 239 of file intmatbilinearcz.C.

References oofem::StructuralInterfaceMaterial::give3dStiffnessMatrix_dTdj_Num(), and OOFEM_WARNING.

◆ giveClassName()

const char * oofem::IntMatBilinearCZ::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Implements oofem::FEMComponent.

Definition at line 111 of file intmatbilinearcz.h.

◆ giveFirstPKTraction_3d()

FloatArrayF< 3 > oofem::IntMatBilinearCZ::giveFirstPKTraction_3d	(	const FloatArrayF< 3 > &	jump,
		const FloatMatrixF< 3, 3 > &	F,
		GaussPoint *	gp,
		TimeStep *	tStep ) const

overridevirtual

◆ giveInputRecord()

void oofem::IntMatBilinearCZ::giveInputRecord ( DynamicInputRecord & input )

overridevirtual

Setups the input record string of receiver.

Parameters

input Dynamic input record to be filled by receiver.

Reimplemented from oofem::FEMComponent.

Definition at line 296 of file intmatbilinearcz.C.

References _IFT_IntMatBilinearCZ_g1c, _IFT_IntMatBilinearCZ_g2c, _IFT_IntMatBilinearCZ_gamma, _IFT_IntMatBilinearCZ_mu, _IFT_IntMatBilinearCZ_PenaltyStiffness, _IFT_IntMatBilinearCZ_sigf, mGamma, mGIc, mGIIc, mMu, mPenaltyStiffness, mSigmaF, and oofem::DynamicInputRecord::setField().

◆ giveInputRecordName()

const char * oofem::IntMatBilinearCZ::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Implements oofem::FEMComponent.

Definition at line 112 of file intmatbilinearcz.h.

References _IFT_IntMatBilinearCZ_Name.

◆ hasAnalyticalTangentStiffness()

bool oofem::IntMatBilinearCZ::hasAnalyticalTangentStiffness ( ) const

inlineoverridevirtual

Tells if the model has implemented analytical tangent stiffness. If not, the tangent must be computed numerically.

Implements oofem::StructuralInterfaceMaterial.

Definition at line 119 of file intmatbilinearcz.h.

◆ initializeFrom()

void oofem::IntMatBilinearCZ::initializeFrom ( InputRecord & ir )

overridevirtual

Initializes receiver according to object description stored in input record. This function is called immediately after creating object using constructor. Input record can be imagined as data record in component database belonging to receiver. Receiver may use value-name extracting functions to extract particular field from record. Note that initializeFrom may be called mutiple times.

See also: IR_GIVE_FIELD; IR_GIVE_OPTIONAL_FIELD

Parameters

ir	Input record to initialize from.
priority	Priority of the input record. This is used to determine the order of initialization

Reimplemented from oofem::FEMComponent.

Definition at line 273 of file intmatbilinearcz.C.

References _IFT_IntMatBilinearCZ_g1c, _IFT_IntMatBilinearCZ_g2c, _IFT_IntMatBilinearCZ_gamma, _IFT_IntMatBilinearCZ_mu, _IFT_IntMatBilinearCZ_PenaltyStiffness, _IFT_IntMatBilinearCZ_semiexplicit, _IFT_IntMatBilinearCZ_sigf, oofem::InputRecord::hasField(), IR_GIVE_FIELD, IR_GIVE_OPTIONAL_FIELD, mGamma, mGIc, mGIIc, mMu, mPenaltyStiffness, mSemiExplicit, and mSigmaF.

◆ printYourself()

void oofem::IntMatBilinearCZ::printYourself ( )

overridevirtual

Prints receiver state on stdout. Useful for debugging.

Reimplemented from oofem::FEMComponent.

Definition at line 310 of file intmatbilinearcz.C.

References mGamma, mGIc, mGIIc, mMu, mPenaltyStiffness, and mSigmaF.

Member Data Documentation

◆ mGamma

double oofem::IntMatBilinearCZ::mGamma = 0.

protected

Definition at line 102 of file intmatbilinearcz.h.

Referenced by computeTraction(), computeYieldFunction(), giveInputRecord(), initializeFrom(), and printYourself().

◆ mGIc

double oofem::IntMatBilinearCZ::mGIc = 0.

protected

Definition at line 97 of file intmatbilinearcz.h.

Referenced by computeTraction(), giveFirstPKTraction_3d(), giveInputRecord(), initializeFrom(), and printYourself().

◆ mGIIc

double oofem::IntMatBilinearCZ::mGIIc = 0.

protected

Definition at line 98 of file intmatbilinearcz.h.

Referenced by computeTraction(), giveInputRecord(), initializeFrom(), and printYourself().

◆ mMu

double oofem::IntMatBilinearCZ::mMu = 0.

protected

Definition at line 101 of file intmatbilinearcz.h.

Referenced by computeYieldFunction(), giveInputRecord(), initializeFrom(), and printYourself().

◆ mPenaltyStiffness

double oofem::IntMatBilinearCZ::mPenaltyStiffness = 0.

protected

Definition at line 96 of file intmatbilinearcz.h.

Referenced by computeTraction(), giveFirstPKTraction_3d(), giveInputRecord(), initializeFrom(), and printYourself().

◆ mSemiExplicit

bool oofem::IntMatBilinearCZ::mSemiExplicit = false

protected

Definition at line 104 of file intmatbilinearcz.h.

Referenced by giveFirstPKTraction_3d(), and initializeFrom().

◆ mSigmaF

double oofem::IntMatBilinearCZ::mSigmaF = 0.

protected

Definition at line 99 of file intmatbilinearcz.h.

Referenced by computeTraction(), computeYieldFunction(), giveFirstPKTraction_3d(), giveInputRecord(), initializeFrom(), and printYourself().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IntMatBilinearCZ()

Member Function Documentation

◆ checkConsistency()

◆ computeTraction()

◆ computeYieldFunction()

◆ CreateStatus()

◆ give3dStiffnessMatrix_dTdj()

◆ giveClassName()

◆ giveFirstPKTraction_3d()

◆ giveInputRecord()

◆ giveInputRecordName()

◆ hasAnalyticalTangentStiffness()

◆ initializeFrom()

◆ printYourself()

Member Data Documentation

◆ mGamma

◆ mGIc

◆ mGIIc

◆ mMu

◆ mPenaltyStiffness

◆ mSemiExplicit

◆ mSigmaF