#include <intmatbilinczjansson.h>

Inheritance diagram for oofem::IntMatBilinearCZJansson:

Collaboration diagram for oofem::IntMatBilinearCZJansson:

Public Member Functions
	IntMatBilinearCZJansson (int n, Domain *d)
const char *	giveClassName () const override
const char *	giveInputRecordName () const override
FloatArrayF< 3 >	giveFirstPKTraction_3d (const FloatArrayF< 3 > &jump, const FloatMatrixF< 3, 3 > &F, GaussPoint gp, TimeStep tStep) const override
FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_dTdj (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const override
bool	hasAnalyticalTangentStiffness () const override
void	initializeFrom (InputRecord &ir) override
FloatArray	giveInterfaceStrength () override
std::unique_ptr< MaterialStatus >	CreateStatus (GaussPoint *gp) const override
void	printYourself () override
	Prints receiver state on stdout. Useful for debugging.
Public Member Functions inherited from oofem::StructuralInterfaceMaterial
	StructuralInterfaceMaterial (int n, Domain *d)
virtual double	giveFirstPKTraction_1d (double jump, double reducedF, GaussPoint gp, TimeStep tStep) const
virtual FloatArrayF< 2 >	giveFirstPKTraction_2d (const FloatArrayF< 2 > &jump, const FloatMatrixF< 2, 2 > &reducedF, GaussPoint gp, TimeStep tStep) const
virtual double	giveEngTraction_1d (double jump, GaussPoint gp, TimeStep tStep) const
virtual FloatArrayF< 2 >	giveEngTraction_2d (const FloatArrayF< 2 > &jump, GaussPoint gp, TimeStep tStep) const
virtual FloatArrayF< 3 >	giveEngTraction_3d (const FloatArrayF< 3 > &jump, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_dTdj (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_dTdj (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_Eng (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_Eng (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
virtual FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_Eng (MatResponseMode rMode, GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_dTdj_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_dTdj_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_dTdj_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 1, 1 >	give1dStiffnessMatrix_Eng_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 2, 2 >	give2dStiffnessMatrix_Eng_Num (GaussPoint gp, TimeStep tStep) const
FloatMatrixF< 3, 3 >	give3dStiffnessMatrix_Eng_Num (GaussPoint gp, TimeStep tStep) const
void	initializeFrom (InputRecord &ir) override
void	giveInputRecord (DynamicInputRecord &input) override
int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep) override
Public Member Functions inherited from oofem::Material
	Material (int n, Domain *d)
virtual	~Material ()=default
	Destructor.
virtual bool	isCharacteristicMtrxSymmetric (MatResponseMode rMode) const
virtual void	giveCharacteristicMatrix (FloatMatrix &answer, MatResponseMode type, GaussPoint gp, TimeStep tStep) const
	Returns characteristic matrix of the receiver.
virtual void	giveCharacteristicVector (FloatArray &answer, FloatArray &flux, MatResponseMode type, GaussPoint gp, TimeStep tStep) const
	Returns characteristic vector of the receiver.
virtual double	giveCharacteristicValue (MatResponseMode type, GaussPoint gp, TimeStep tStep) const
	Returns characteristic value of the receiver.
virtual double	give (int aProperty, GaussPoint *gp) const
virtual bool	hasProperty (int aProperty, GaussPoint *gp) const
virtual void	modifyProperty (int aProperty, double value, GaussPoint *gp)
double	giveCastingTime () const
virtual bool	isActivated (TimeStep *tStep) const
virtual bool	hasMaterialModeCapability (MaterialMode mode) const
virtual bool	hasCastingTimeSupport () const
virtual int	setIPValue (const FloatArray &value, GaussPoint *gp, InternalStateType type)
void	printYourself () override
	Prints receiver state on stdout. Useful for debugging.
virtual void	saveIPContext (DataStream &stream, ContextMode mode, GaussPoint *gp)
virtual void	restoreIPContext (DataStream &stream, ContextMode mode, GaussPoint *gp)
int	checkConsistency () override
virtual void	restoreConsistency (GaussPoint *gp)
virtual int	initMaterial (Element *element)
virtual MaterialStatus *	giveStatus (GaussPoint *gp) const
virtual int	packUnknowns (DataStream &buff, TimeStep tStep, GaussPoint ip)
virtual int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep tStep, GaussPoint ip)
virtual int	estimatePackSize (DataStream &buff, GaussPoint *ip)
virtual double	predictRelativeComputationalCost (GaussPoint *gp)
virtual double	predictRelativeRedistributionCost (GaussPoint *gp)
virtual void	initTempStatus (GaussPoint *gp) const
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
virtual void	initializeFrom (InputRecord &ir, int priority)
virtual void	initializeFinish ()
virtual void	postInitialize ()
	Performs post initialization steps. Called after all components are created and initialized.
virtual void	printOutputAt (FILE file, TimeStep tStep)
virtual Interface *	giveInterface (InterfaceType t)
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).

Protected Member Functions
int	checkConsistency () override
void	give3dInterfaceMaterialStiffnessMatrix (FloatMatrix &answer, MatResponseMode rMode, GaussPoint gp, TimeStep tStep)

Protected Attributes
double	kn0 = 0.
double	ks0 = 0.
double	knc = 0.
double	GIc = 0.
double	GIIc = 0.
double	sigf = 0.
double	mu = 0.
double	gamma = 0.
bool	mSemiExplicit = false
Protected Attributes inherited from oofem::Material
Dictionary	propertyDictionary
double	castingTime
int	preCastingTimeMat
	Material existing before casting time - optional parameter, zero by default.
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.

Additional Inherited Members
Public Attributes inherited from oofem::StructuralInterfaceMaterial
bool	useNumericalTangent

Detailed Description

Simple isotropic damage based model for 2d interface elements. In 2d, the interface elements are used to model contact layer between element edges. The generalized strain vector contains two relative displacements (in normal and shear direction). The generalized stress vector contains corresponding tractions in normal and tangent direction.

The behaviour of the model is elastic, described by normal and shear stiffness components. Isotropic damage is initiated when the stress reaches the tensile strength. Damage evolution is governed by normal component of generalized strain vector (normal relative displacement) by an exponential softening law.

Definition at line 153 of file intmatbilinczjansson.h.

Constructor & Destructor Documentation

◆ IntMatBilinearCZJansson()

oofem::IntMatBilinearCZJansson::IntMatBilinearCZJansson	(	int	n,
		Domain *	d )

Definition at line 49 of file intmatbilinczjansson.C.

References oofem::StructuralInterfaceMaterial::StructuralInterfaceMaterial().

Member Function Documentation

◆ checkConsistency()

int oofem::IntMatBilinearCZJansson::checkConsistency ( void )

overrideprotectedvirtual

Allows programmer to test some internal data, before computation begins. For example, one may use this function, to ensure that element has material with required capabilities is assigned to element. This must be done after all mesh components are instanciated.

Returns: Nonzero if receiver is consistent.

Reimplemented from oofem::FEMComponent.

Definition at line 399 of file intmatbilinczjansson.C.

◆ CreateStatus()

std::unique_ptr< MaterialStatus > oofem::IntMatBilinearCZJansson::CreateStatus ( GaussPoint * gp ) const

inlineoverridevirtual

Creates new copy of associated status and inserts it into given integration point.

Parameters

gp	Integration point where newly created status will be stored.

Returns: Reference to new status.

Reimplemented from oofem::Material.

Definition at line 187 of file intmatbilinczjansson.h.

◆ give3dInterfaceMaterialStiffnessMatrix()

void oofem::IntMatBilinearCZJansson::give3dInterfaceMaterialStiffnessMatrix	(	FloatMatrix &	answer,
		MatResponseMode	rMode,
		GaussPoint *	gp,
		TimeStep *	tStep )

protected

◆ give3dStiffnessMatrix_dTdj()

FloatMatrixF< 3, 3 > oofem::IntMatBilinearCZJansson::give3dStiffnessMatrix_dTdj	(	MatResponseMode	rMode,
		GaussPoint *	gp,
		TimeStep *	tStep ) const

overridevirtual

Reimplemented from oofem::StructuralInterfaceMaterial.

Definition at line 274 of file intmatbilinczjansson.C.

◆ giveClassName()

const char * oofem::IntMatBilinearCZJansson::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Implements oofem::FEMComponent.

Definition at line 175 of file intmatbilinczjansson.h.

◆ giveFirstPKTraction_3d()

FloatArrayF< 3 > oofem::IntMatBilinearCZJansson::giveFirstPKTraction_3d	(	const FloatArrayF< 3 > &	d,
		const FloatMatrixF< 3, 3 > &	F,
		GaussPoint *	gp,
		TimeStep *	tStep ) const

overridevirtual

Todo

need to rearrange traction and stiffness matrix so the first component is normal

Reimplemented from oofem::StructuralInterfaceMaterial.

Definition at line 55 of file intmatbilinczjansson.C.

◆ giveInputRecordName()

const char * oofem::IntMatBilinearCZJansson::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Implements oofem::FEMComponent.

Definition at line 176 of file intmatbilinczjansson.h.

References _IFT_IntMatBilinearCZJansson_Name.

◆ giveInterfaceStrength()

FloatArray oofem::IntMatBilinearCZJansson::giveInterfaceStrength ( )

inlineoverridevirtual

Reimplemented from oofem::StructuralInterfaceMaterial.

Definition at line 185 of file intmatbilinczjansson.h.

◆ hasAnalyticalTangentStiffness()

bool oofem::IntMatBilinearCZJansson::hasAnalyticalTangentStiffness ( ) const

inlineoverridevirtual

Tells if the model has implemented analytical tangent stiffness. If not, the tangent must be computed numerically.

Implements oofem::StructuralInterfaceMaterial.

Definition at line 181 of file intmatbilinczjansson.h.

◆ initializeFrom()

void oofem::IntMatBilinearCZJansson::initializeFrom ( InputRecord & ir )

overridevirtual

Initializes receiver according to object description stored in input record. This function is called immediately after creating object using constructor. Input record can be imagined as data record in component database belonging to receiver. Receiver may use value-name extracting functions to extract particular field from record. Note that initializeFrom may be called mutiple times.

See also: IR_GIVE_FIELD; IR_GIVE_OPTIONAL_FIELD

Parameters

ir	Input record to initialize from.
priority	Priority of the input record. This is used to determine the order of initialization

Reimplemented from oofem::FEMComponent.

Definition at line 359 of file intmatbilinczjansson.C.

References _IFT_IntMatBilinearCZJansson_g1c, _IFT_IntMatBilinearCZJansson_g2c, _IFT_IntMatBilinearCZJansson_gamma, _IFT_IntMatBilinearCZJansson_kn, _IFT_IntMatBilinearCZJansson_knc, _IFT_IntMatBilinearCZJansson_ks, _IFT_IntMatBilinearCZJansson_mu, _IFT_IntMatBilinearCZJansson_semiexplicit, _IFT_IntMatBilinearCZJansson_sigf, gamma, GIc, GIIc, oofem::InputRecord::hasField(), IR_GIVE_FIELD, IR_GIVE_OPTIONAL_FIELD, kn0, knc, ks0, mSemiExplicit, mu, and sigf.

◆ printYourself()

void oofem::IntMatBilinearCZJansson::printYourself ( )

overridevirtual

Prints receiver state on stdout. Useful for debugging.

Reimplemented from oofem::FEMComponent.

Definition at line 405 of file intmatbilinczjansson.C.

References gamma, GIc, GIIc, kn0, knc, ks0, mu, and sigf.

Member Data Documentation

◆ gamma

double oofem::IntMatBilinearCZJansson::gamma = 0.

protected

Definition at line 164 of file intmatbilinczjansson.h.

Referenced by giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ GIc

double oofem::IntMatBilinearCZJansson::GIc = 0.

protected

Definition at line 159 of file intmatbilinczjansson.h.

Referenced by giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ GIIc

double oofem::IntMatBilinearCZJansson::GIIc = 0.

protected

Definition at line 160 of file intmatbilinczjansson.h.

Referenced by giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ kn0

double oofem::IntMatBilinearCZJansson::kn0 = 0.

protected

Definition at line 156 of file intmatbilinczjansson.h.

Referenced by give3dStiffnessMatrix_dTdj(), giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ knc

double oofem::IntMatBilinearCZJansson::knc = 0.

protected

Definition at line 158 of file intmatbilinczjansson.h.

Referenced by give3dStiffnessMatrix_dTdj(), giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ ks0

double oofem::IntMatBilinearCZJansson::ks0 = 0.

protected

Definition at line 157 of file intmatbilinczjansson.h.

Referenced by give3dStiffnessMatrix_dTdj(), giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ mSemiExplicit

bool oofem::IntMatBilinearCZJansson::mSemiExplicit = false

protected

Definition at line 166 of file intmatbilinczjansson.h.

Referenced by giveFirstPKTraction_3d(), and initializeFrom().

◆ mu

double oofem::IntMatBilinearCZJansson::mu = 0.

protected

Definition at line 163 of file intmatbilinczjansson.h.

Referenced by giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

◆ sigf

double oofem::IntMatBilinearCZJansson::sigf = 0.

protected

Definition at line 161 of file intmatbilinczjansson.h.

Referenced by giveFirstPKTraction_3d(), initializeFrom(), and printYourself().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IntMatBilinearCZJansson()

Member Function Documentation

◆ checkConsistency()

◆ CreateStatus()

◆ give3dInterfaceMaterialStiffnessMatrix()

◆ give3dStiffnessMatrix_dTdj()

◆ giveClassName()

◆ giveFirstPKTraction_3d()

◆ giveInputRecordName()

◆ giveInterfaceStrength()

◆ hasAnalyticalTangentStiffness()

◆ initializeFrom()

◆ printYourself()

Member Data Documentation

◆ gamma

◆ GIc

◆ GIIc

◆ kn0

◆ knc

◆ ks0

◆ mSemiExplicit

◆ mu

◆ sigf