#include <planestressgraddamage.h>

Inheritance diagram for oofem::PlaneStressGradDamage:

Collaboration diagram for oofem::PlaneStressGradDamage:

Public Member Functions
	PlaneStressGradDamage (int n, Domain *d)
virtual	~PlaneStressGradDamage ()
void	initializeFrom (InputRecord &ir, int priority) override
const char *	giveInputRecordName () const override
const char *	giveClassName () const override
MaterialMode	giveMaterialMode () override
int	computeNumberOfDofs () override
Public Member Functions inherited from oofem::PlaneStress2d
	PlaneStress2d (int n, Domain *d)
virtual	~PlaneStress2d ()
double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method) override
double	giveParentElSize () const override
Interface *	giveInterface (InterfaceType it) override
FEInterpolation *	giveInterpolation () const override
void	SPRNodalRecoveryMI_giveSPRAssemblyPoints (IntArray &pap) override
void	SPRNodalRecoveryMI_giveDofMansDeterminedByPatch (IntArray &answer, int pap) override
int	SPRNodalRecoveryMI_giveNumberOfIP () override
SPRPatchType	SPRNodalRecoveryMI_givePatchType () override
void	HuertaErrorEstimatorI_setupRefinedElementProblem (RefinedElement refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode sMode, TimeStep tStep, int &localNodeId, int &localElemId, int &localBcId, IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode) override
void	HuertaErrorEstimatorI_computeNmatrixAt (GaussPoint *gp, FloatMatrix &answer) override
void	drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep) override
void	drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType) override
void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep) override
void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep) override
Element_Geometry_Type	giveGeometryType () const override
Public Member Functions inherited from oofem::PlaneStressElement
	PlaneStressElement (int n, Domain *d)
virtual	~PlaneStressElement ()
void	computeStressVector (FloatArray &answer, const FloatArray &strain, GaussPoint gp, TimeStep tStep) override
void	computeConstitutiveMatrixAt (FloatMatrix &answer, MatResponseMode rMode, GaussPoint gp, TimeStep tStep) override
void	computeConstitutiveMatrix_dPdF_At (FloatMatrix &answer, MatResponseMode rMode, GaussPoint gp, TimeStep tStep) override
Public Member Functions inherited from oofem::Structural2DElement
	Structural2DElement (int n, Domain *d)
virtual	~Structural2DElement ()
	Destructor.
void	postInitialize () override
	Performs post initialization steps.
int	giveNumberOfNodes () const override
virtual FEICellGeometry *	giveCellGeometryWrapper ()
int	computeNumberOfDofs () override
void	giveDofManDofIDMask (int inode, IntArray &answer) const override
double	computeVolumeAround (GaussPoint *gp) override
void	initializeFrom (InputRecord &ir, int priority) override
double	giveCharacteristicLength (const FloatArray &normalToCrackPlane) override
Public Member Functions inherited from oofem::NLStructuralElement
	NLStructuralElement (int n, Domain *d)
virtual	~NLStructuralElement ()
	Destructor.
int	giveGeometryMode ()
void	computeFirstPKStressVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
void	computeCauchyStressVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
void	computeInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep) override
void	computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep)
void	giveInternalForcesVector_withIRulesAsSubcells (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override
virtual void	computeDeformationGradientVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
double	computeCurrentVolume (TimeStep *tStep)
void	giveInputRecord (DynamicInputRecord &input) override
Public Member Functions inherited from oofem::StructuralElement
	StructuralElement (int n, Domain *d)
virtual	~StructuralElement ()
	Destructor.
void	giveCharacteristicMatrix (FloatMatrix &answer, CharType, TimeStep *tStep) override
void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep) override
virtual void	computeMassMatrix (FloatMatrix &answer, TimeStep *tStep)
virtual void	computeLumpedMassMatrix (FloatMatrix &answer, TimeStep *tStep)
virtual void	computeConsistentMassMatrix (FloatMatrix &answer, TimeStep tStep, double &mass, const double ipDensity=NULL)
virtual void	giveMassMtrxIntegrationgMask (IntArray &answer)
void	computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep)
virtual void	computeLumpedInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep)
void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer) override
virtual void	computeStrainVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep) override
virtual void	computeResultingIPTemperatureAt (FloatArray &answer, TimeStep tStep, GaussPoint gp, ValueModeType mode)
virtual void	computeResultingIPEigenstrainAt (FloatArray &answer, TimeStep tStep, GaussPoint gp, ValueModeType mode)
virtual void	computeNmatrixAt (const FloatArray &iLocCoord, FloatMatrix &answer)
void	updateBeforeNonlocalAverage (TimeStep *tStep) override
virtual void	giveNonlocalLocationArray (IntArray &locationArray, const UnknownNumberingScheme &us)
virtual void	addNonlocalStiffnessContributions (SparseMtrx &dest, const UnknownNumberingScheme &s, TimeStep *tStep)
int	adaptiveUpdate (TimeStep *tStep) override
void	updateInternalState (TimeStep *tStep) override
void	updateYourself (TimeStep *tStep) override
int	checkConsistency () override
void	giveInputRecord (DynamicInputRecord &input) override
const char *	giveClassName () const override
int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep) override
void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override
	Shows sparse structure.
void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness).
void	computeLoadVector (FloatArray &answer, BodyLoad load, CharType type, ValueModeType mode, TimeStep tStep) override
void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true) override
void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true) override
virtual void	computeEdgeNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords)
	computes edge interpolation matrix
virtual void	computeSurfaceNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords)
StructuralCrossSection *	giveStructuralCrossSection ()
	Helper function which returns the structural cross-section for the element.
virtual void	createMaterialStatus ()
Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Element (const Element &src)=delete
Element &	operator= (const Element &src)=delete
virtual	~Element ()
	Virtual destructor.
void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual int	giveNumberOfDofs ()
virtual int	giveNumberOfInternalDofManagers () const
virtual DofManager *	giveInternalDofManager (int i) const
virtual void	setInternalDofManager (int num, std::unique_ptr< DofManager > dm)
virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
const IntArray &	giveBodyLoadList () const
const IntArray &	giveBoundaryLoadList () const
void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
virtual int	computeNumberOfGlobalDofs ()
int	computeNumberOfPrimaryMasterDofs ()
virtual bool	computeGtoLRotationMatrix (FloatMatrix &answer)
virtual bool	giveRotationMatrix (FloatMatrix &answer)
virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
virtual void	giveElementDofIDMask (IntArray &answer) const
virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension.
double	computeMeanSize ()
virtual double	computeVolume ()
virtual double	computeArea ()
virtual double	computeLength ()
virtual IntArray	giveBoundaryEdgeNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundarySurfaceNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundaryNodes (int boundary) const
virtual std::unique_ptr< IntegrationRule >	giveBoundaryEdgeIntegrationRule (int order, int boundary)
virtual std::unique_ptr< IntegrationRule >	giveBoundarySurfaceIntegrationRule (int order, int boundary)
int	giveDofManagerNumber (int i) const
const IntArray &	giveDofManArray () const
void	addDofManager (DofManager *dMan)
DofManager *	giveDofManager (int i) const
Node *	giveNode (int i) const
virtual ElementSide *	giveSide (int i) const
virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
virtual const FEInterpolation *	getGeometryInterpolation () const
virtual Material *	giveMaterial ()
int	giveMaterialNumber () const
CrossSection *	giveCrossSection ()
int	getActivityTimeFunctionNumber ()
void	setActivityTimeFunctionNumber (int funcIndx)
void	setMaterial (int matIndx)
virtual void	setCrossSection (int csIndx)
virtual int	giveNumberOfDofManagers () const
void	setNumberOfDofManagers (int i)
	Sets number of element dof managers.
void	setDofManagers (const IntArray &dmans)
void	setDofManager (int id, int dm)
void	setBodyLoads (const IntArray &bodyLoads)
void	setIntegrationRules (std ::vector< std ::unique_ptr< IntegrationRule > > irlist)
virtual integrationDomain	giveIntegrationDomain () const
virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
int	giveRegionNumber ()
virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
virtual bool	isActivated (TimeStep *tStep)
virtual bool	isCast (TimeStep *tStep)
virtual void	initForNewStep ()
virtual Element_Geometry_Type	giveEdgeGeometryType (int id) const
	Returns the receiver edge geometry type.
virtual Element_Geometry_Type	giveSurfaceGeometryType (int id) const
	Returns the receiver surface geometry type.
virtual int	giveSpatialDimension ()
virtual int	giveNumberOfBoundarySides ()
	Returns number of boundaries (entities of element_dimension-1: points, edges, surfaces).
virtual int	giveNumberOfEdges () const
virtual int	giveNumberOfSurfaces () const
virtual int	giveDefaultIntegrationRule () const
virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
int	giveNumberOfIntegrationRules ()
virtual IntegrationRule *	giveIntegrationRule (int i)
std::vector< std ::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()
int	giveGlobalIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
virtual int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords)
virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
virtual int	giveLocalCoordinateSystem (FloatMatrix &answer)
virtual void	giveLocalCoordinateSystemVector (InternalStateType isttype, FloatArray &answer)
virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
virtual int	adaptiveMap (Domain oldd, TimeStep tStep)
virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
virtual int	adaptiveFinish (TimeStep *tStep)
void	updateLocalNumbering (EntityRenumberingFunctor &f) override
template<class T>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f.
template<class T, class S>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array.
virtual void	drawYourself (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)
virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
int	giveLabel () const
int	giveGlobalNumber () const
void	setGlobalNumber (int num)
elementParallelMode	giveParallelMode () const
void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element.
virtual elementParallelMode	giveKnotSpanParallelMode (int) const
int	packUnknowns (DataStream &buff, TimeStep *tStep)
int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
int	estimatePackSize (DataStream &buff)
const IntArray *	givePartitionList () const
void	setPartitionList (IntArray &pl)
virtual double	predictRelativeComputationalCost ()
virtual double	giveRelativeSelfComputationalCost ()
virtual double	predictRelativeRedistributionCost ()
IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element.
IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element.
void	initializeFinish () override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
void	printOutputAt (FILE file, TimeStep tStep) override
virtual const IntArray	giveLocation ()
virtual void	recalculateCoordinates (int nodeNumber, FloatArray &coords)
void	setSharedEdgeID (int iedge, int globalID)
void	setSharedSurfaceID (int isurf, int globalID)
const IntArray *	giveSharedEdgeIDs () const
const IntArray *	giveSharedSurfaceIDs () const
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	initializeFrom (InputRecord &ir)
virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging.
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).
Public Member Functions inherited from oofem::ZZNodalRecoveryModelInterface
	ZZNodalRecoveryModelInterface (Element *element)
	Constructor.
virtual bool	ZZNodalRecoveryMI_computeNValProduct (FloatMatrix &answer, InternalStateType type, TimeStep *tStep)
virtual void	ZZNodalRecoveryMI_computeNNMatrix (FloatArray &answer, InternalStateType type)
Public Member Functions inherited from oofem::Interface
	Interface ()
	Constructor.
virtual	~Interface ()
Public Member Functions inherited from oofem::SPRNodalRecoveryModelInterface
	SPRNodalRecoveryModelInterface ()
	Constructor.
Public Member Functions inherited from oofem::SpatialLocalizerInterface
	SpatialLocalizerInterface (Element *element)
virtual int	SpatialLocalizerI_containsPoint (const FloatArray &coords)
int	SpatialLocalizerI_BBoxContainsPoint (const FloatArray &coords)
virtual void	SpatialLocalizerI_giveBBox (FloatArray &bb0, FloatArray &bb1)
virtual double	SpatialLocalizerI_giveClosestPoint (FloatArray &lcoords, FloatArray &closest, const FloatArray &gcoords)
Public Member Functions inherited from oofem::HuertaErrorEstimatorInterface
	HuertaErrorEstimatorInterface ()
	Constructor.
Public Member Functions inherited from oofem::GradientDamageElement
	GradientDamageElement ()
virtual	~GradientDamageElement ()
virtual void	initializeFrom (InputRecord &ir)

Protected Member Functions
void	computeBdMatrixAt (GaussPoint *gp, FloatMatrix &answer) override
void	computeNdMatrixAt (GaussPoint *gp, FloatArray &answer) override
void	computeStiffnessMatrix (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) override
void	giveInternalForcesVector (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override
void	computeGaussPoints () override
void	giveDofManDofIDMask (int inode, IntArray &answer) const override
void	giveDofManDofIDMask_u (IntArray &answer) const override
void	giveDofManDofIDMask_d (IntArray &answer) const override
StructuralElement *	giveStructuralElement () override
NLStructuralElement *	giveNLStructuralElement () override
void	giveLocationArray_u (IntArray &answer) override
void	giveLocationArray_d (IntArray &answer) override
void	postInitialize () override
	Performs post initialization steps.
Protected Member Functions inherited from oofem::PlaneStress2d
void	computeBmatrixAt (GaussPoint *gp, FloatMatrix &answer, int=1, int=ALL_STRAINS) override
void	computeBHmatrixAt (GaussPoint *gp, FloatMatrix &answer) override
int	giveNumberOfIPForMassMtrxIntegration () override
Protected Member Functions inherited from oofem::PlaneStressElement
void	computeBmatrixAt (GaussPoint *gp, FloatMatrix &answer, int lowerIndx=1, int upperIndx=ALL_STRAINS) override
void	computeBHmatrixAt (GaussPoint *gp, FloatMatrix &answer) override
Protected Member Functions inherited from oofem::Structural2DElement
void	computeGaussPoints () override
void	giveMaterialOrientationAt (FloatArray &x, FloatArray &y, const FloatArray &lcoords)
void	giveEdgeDofMapping (IntArray &answer, int iEdge) const override
double	computeEdgeVolumeAround (GaussPoint *gp, int iEdge) override
int	computeLoadLEToLRotationMatrix (FloatMatrix &answer, int iEdge, GaussPoint *gp) override
int	testElementExtension (ElementExtension ext) override
Protected Member Functions inherited from oofem::NLStructuralElement
int	checkConsistency () override
virtual void	computePointLoadVectorAt (FloatArray &answer, Load load, TimeStep tStep, ValueModeType mode, bool global=true)
virtual void	giveSurfaceDofMapping (IntArray &answer, int iSurf) const
virtual double	computeSurfaceVolumeAround (GaussPoint *gp, int iSurf)
virtual int	computeLoadGToLRotationMtrx (FloatMatrix &answer)
virtual int	computeLoadLSToLRotationMatrix (FloatMatrix &answer, int iSurf, GaussPoint *gp)
void	condense (FloatMatrix stiff, FloatMatrix mass, FloatArray load, IntArray what)
virtual void	setupIRForMassMtrxIntegration (IntegrationRule &iRule)
virtual void	computeBodyLoadVectorAt (FloatArray &answer, Load load, TimeStep tStep, ValueModeType mode)
Protected Member Functions inherited from oofem::HuertaErrorEstimatorInterface
void	setupRefinedElementProblem1D (Element element, RefinedElement refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode mode, TimeStep tStep, int nodes, FloatArray corner, FloatArray &midNode, int &localNodeId, int &localElemId, int &localBcId, IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode, const char *edgetype)
void	setupRefinedElementProblem2D (Element element, RefinedElement refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode mode, TimeStep tStep, int nodes, FloatArray corner, FloatArray midSide, FloatArray &midNode, int &localNodeId, int &localElemId, int &localBcId, IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode, const char quadtype)
void	setupRefinedElementProblem3D (Element element, RefinedElement refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode mode, TimeStep tStep, int nodes, FloatArray corner, FloatArray midSide, FloatArray midFace, FloatArray &midNode, int &localNodeId, int &localElemId, int &localBcId, int hexaSideNode[1][3], int hexaFaceNode[1][3], IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode, const char *hexatype)
Protected Member Functions inherited from oofem::GradientDamageElement
void	computeStiffnessMatrix (FloatMatrix &, MatResponseMode, TimeStep *)
void	computeStiffnessMatrix_uu (FloatMatrix &, MatResponseMode, TimeStep *)
void	computeStiffnessMatrix_ud (FloatMatrix &, MatResponseMode, TimeStep *)
void	computeStiffnessMatrix_dd (FloatMatrix &, MatResponseMode, TimeStep *)
void	computeStiffnessMatrix_du (FloatMatrix &, MatResponseMode, TimeStep *)
void	computeDisplacementDegreesOfFreedom (FloatArray &answer, TimeStep *tStep)
void	computeStrainVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
void	computeDeformationGradientVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
void	computeNonlocalDegreesOfFreedom (FloatArray &answer, TimeStep *tStep, ValueModeType vmt=VM_Total)
void	computeNonlocalDamageDrivingVariable (double &answer, GaussPoint gp, TimeStep tStep)
void	computeNonlocalDamageDrivingVariableGradient (FloatArray &answer, GaussPoint gp, TimeStep tStep)
void	giveInternalForcesVector (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord)
void	giveInternalForcesVector_u (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord)
void	giveInternalForcesVector_d (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord)
void	computeInternalForces_dN (double &answer, double localDamageDrivingVariable, double damage, GaussPoint gp, TimeStep tStep)
void	computeInternalForces_dB (FloatArray &answer, double localDamageDrivingVariable, FloatArray damage_grad, GaussPoint gp, TimeStep tStep)
void	computeStressVector_and_localDamageDrivingVariable (FloatArray &answer, double &localCumulatedPlasticStrain, GaussPoint gp, TimeStep tStep)
void	giveLocationArrayOfDofIDs (IntArray &locationArray_u, IntArray &locationArray_d, const UnknownNumberingScheme &s, const IntArray &dofIdArray_u, const IntArray &dofIdArray_m)

Static Protected Attributes
static IntArray	locationArray_u = {1,2, 4,5, 7,8, 10,11}
static IntArray	locationArray_d = {3,6,9,12}
Static Protected Attributes inherited from oofem::PlaneStress2d
static FEI2dQuadLin	interpolation
Static Protected Attributes inherited from oofem::Structural2DElement
static ParamKey	IPK_Structural2DElement_materialCoordinateSystem
	[optional] Material coordinate system (local) for the element.
Static Protected Attributes inherited from oofem::NLStructuralElement
static ParamKey	IPK_NLStructuralElement_nlgeoflag

Additional Inherited Members
Public Types inherited from oofem::HuertaErrorEstimatorInterface
enum	SetupMode { CountMode = 0 , NodeMode = 1 , ElemMode = 2 , BCMode = 3 }
	Mode for problem setup. More...
Static Public Attributes inherited from oofem::Element
static ParamKey	IPK_Element_mat
static ParamKey	IPK_Element_crosssect
static ParamKey	IPK_Element_nodes
static ParamKey	IPK_Element_bodyload
static ParamKey	IPK_Element_boundaryload
static ParamKey	IPK_Element_lcs
static ParamKey	IPK_Element_partitions
static ParamKey	IPK_Element_remote
static ParamKey	IPK_Element_activityTimeFunction
static ParamKey	IPK_Element_nip
Protected Attributes inherited from oofem::Structural2DElement
FEICellGeometry *	cellGeometryWrapper
bool	matRotation
Protected Attributes inherited from oofem::NLStructuralElement
int	nlGeometry =0
	Flag indicating if geometrical nonlinearities apply.
Protected Attributes inherited from oofem::StructuralElement
std::unique_ptr< FloatArray >	initialDisplacements
	Initial displacement vector, describes the initial nodal displacements when element has been casted.
Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers.
IntArray	dofManArray
	Array containing dofmanager numbers.
int	material
	Number of associated material.
int	crossSection
	Number of associated cross section.
IntArray	bodyLoadArray
IntArray	boundaryLoadArray
std::vector< std ::unique_ptr< IntegrationRule > >	integrationRulesArray
FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation.
int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element.
int	globalNumber
int	numberOfGaussPoints
elementParallelMode	parallel_mode
	Determines the parallel mode of the element.
IntArray	partitions
IntArray	globalEdgeIDs
IntArray	globalSurfaceIDs
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.
Protected Attributes inherited from oofem::GradientDamageElement
int	nPrimNodes
int	nPrimVars
int	nSecNodes
int	nSecVars
int	totalSize
int	nlSize
int	locSize
IntArray	locationArray_u
IntArray	locationArray_d
double	penalty

Detailed Description

Definition at line 46 of file planestressgraddamage.h.

Constructor & Destructor Documentation

◆ PlaneStressGradDamage()

oofem::PlaneStressGradDamage::PlaneStressGradDamage	(	int	n,
		Domain *	d )

Definition at line 51 of file planestressgraddamage.C.

References oofem::GradientDamageElement::GradientDamageElement(), oofem::GradientDamageElement::locSize, oofem::GradientDamageElement::nlSize, oofem::GradientDamageElement::nPrimNodes, oofem::GradientDamageElement::nPrimVars, oofem::GradientDamageElement::nSecNodes, oofem::GradientDamageElement::nSecVars, oofem::Element::numberOfGaussPoints, oofem::PlaneStress2d::PlaneStress2d(), and oofem::GradientDamageElement::totalSize.

◆ ~PlaneStressGradDamage()

virtual oofem::PlaneStressGradDamage::~PlaneStressGradDamage ( )

inlinevirtual

Definition at line 53 of file planestressgraddamage.h.

Member Function Documentation

◆ computeBdMatrixAt()

void oofem::PlaneStressGradDamage::computeBdMatrixAt	(	GaussPoint *	gp,
		FloatMatrix &	answer )

overrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 117 of file planestressgraddamage.C.

References oofem::FloatMatrix::beTranspositionOf(), oofem::GaussPoint::giveNaturalCoordinates(), and oofem::PlaneStress2d::interpolation.

◆ computeGaussPoints()

void oofem::PlaneStressGradDamage::computeGaussPoints ( )

overrideprotectedvirtual

Initializes the array of integration rules member variable. Element can have multiple integration rules for different tasks. For example structural element family class uses this feature to implement transparent support for reduced and selective integration of some strain components. Must be defined by terminator classes.

See also: IntegrationRule

Reimplemented from oofem::Element.

Definition at line 101 of file planestressgraddamage.C.

References oofem::Element::giveCrossSection(), oofem::Element::integrationRulesArray, and oofem::Element::numberOfGaussPoints.

◆ computeNdMatrixAt()

void oofem::PlaneStressGradDamage::computeNdMatrixAt	(	GaussPoint *	gp,
		FloatArray &	answer )

overrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 111 of file planestressgraddamage.C.

References oofem::GaussPoint::giveNaturalCoordinates(), and oofem::PlaneStress2d::interpolation.

◆ computeNumberOfDofs()

int oofem::PlaneStressGradDamage::computeNumberOfDofs ( )

inlineoverridevirtual

Computes or simply returns total number of element's local DOFs. Must be defined by particular element.

Returns: Number of local DOFs of element.

Reimplemented from oofem::Element.

Definition at line 60 of file planestressgraddamage.h.

◆ computeStiffnessMatrix()

void oofem::PlaneStressGradDamage::computeStiffnessMatrix	(	FloatMatrix &	answer,
		MatResponseMode	rMode,
		TimeStep *	tStep )

inlineoverrideprotectedvirtual

Computes the stiffness matrix of receiver. The response is evaluated using \( \int B_{\mathrm{H}}^{\mathrm{T}} D B_{\mathrm{H}} \;\mathrm{d}v \), where \( B_{\mathrm{H}} \) is the B-matrix which produces the displacement gradient vector \( H_{\mathrm{V}} \) when multiplied with the solution vector a. Reduced integration are taken into account.

Parameters

answer	Computed stiffness matrix.
rMode	Response mode.
tStep	Time step.

Todo: We probably need overloaded function (like above) here as well.

Todo: Verify that it works with large deformations

Reimplemented from oofem::NLStructuralElement.

Definition at line 65 of file planestressgraddamage.h.

◆ giveClassName()

const char * oofem::PlaneStressGradDamage::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Reimplemented from oofem::PlaneStress2d.

Definition at line 58 of file planestressgraddamage.h.

◆ giveDofManDofIDMask()

void oofem::PlaneStressGradDamage::giveDofManDofIDMask	(	int	inode,
		IntArray &	answer ) const

overrideprotectedvirtual

Returns dofmanager dof mask for node. This mask defines the dofs which are used by element in node. Mask influences the code number ordering for particular node. Code numbers are ordered according to node order and dofs belonging to particular node are ordered according to this mask. If element requests dofs using node mask which are not in node then error is generated. This masking allows node to be shared by different elements with different dofs in same node. Elements local code numbers are extracted from node using this mask. Must be defined by particular element.

Parameters

inode	Mask is computed for local dofmanager with inode number.
answer	Mask for node.

Reimplemented from oofem::Element.

Definition at line 66 of file planestressgraddamage.C.

◆ giveDofManDofIDMask_d()

void oofem::PlaneStressGradDamage::giveDofManDofIDMask_d ( IntArray & answer ) const

overrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 85 of file planestressgraddamage.C.

◆ giveDofManDofIDMask_u()

void oofem::PlaneStressGradDamage::giveDofManDofIDMask_u ( IntArray & answer ) const

overrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 78 of file planestressgraddamage.C.

◆ giveInputRecordName()

const char * oofem::PlaneStressGradDamage::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Reimplemented from oofem::PlaneStress2d.

Definition at line 57 of file planestressgraddamage.h.

References _IFT_PlaneStressGradDamage_Name.

◆ giveInternalForcesVector()

void oofem::PlaneStressGradDamage::giveInternalForcesVector	(	FloatArray &	answer,
		TimeStep *	tStep,
		int	useUpdatedGpRecord = 0 )

inlineoverrideprotectedvirtual

Evaluates nodal representation of real internal forces. Necessary transformations are taken into account.

Todo: what is meant?

Parameters

answer	Equivalent nodal forces vector.
tStep	Time step
useUpdatedGpRecord	If equal to zero, the stresses in integration points are computed (slow but safe).

Todo: Is this really what we should do for inactive elements?

Todo: This is actaully inefficient since it constructs B and twice and collects the nodal unknowns over and over.

Todo: is this check really necessary?

Reimplemented from oofem::NLStructuralElement.

Definition at line 66 of file planestressgraddamage.h.

◆ giveLocationArray_d()

void oofem::PlaneStressGradDamage::giveLocationArray_d ( IntArray & answer )

overrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 133 of file planestressgraddamage.C.

References locationArray_d.

◆ giveLocationArray_u()

void oofem::PlaneStressGradDamage::giveLocationArray_u ( IntArray & answer )

overrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 126 of file planestressgraddamage.C.

References locationArray_u.

◆ giveMaterialMode()

MaterialMode oofem::PlaneStressGradDamage::giveMaterialMode ( )

inlineoverridevirtual

Returns material mode for receiver integration points. Should be specialized.

Returns: Material mode of element.

Reimplemented from oofem::PlaneStressElement.

Definition at line 59 of file planestressgraddamage.h.

◆ giveNLStructuralElement()

NLStructuralElement * oofem::PlaneStressGradDamage::giveNLStructuralElement ( )

inlineoverrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 75 of file planestressgraddamage.h.

◆ giveStructuralElement()

StructuralElement * oofem::PlaneStressGradDamage::giveStructuralElement ( )

inlineoverrideprotectedvirtual

Implements oofem::GradientDamageElement.

Definition at line 74 of file planestressgraddamage.h.

◆ initializeFrom()

void oofem::PlaneStressGradDamage::initializeFrom	(	InputRecord &	ir,
		int	priority )

overridevirtual

Reimplemented from oofem::PlaneStress2d.

Definition at line 94 of file planestressgraddamage.C.

◆ postInitialize()

void oofem::PlaneStressGradDamage::postInitialize ( )

overrideprotectedvirtual

Performs post initialization steps.

Reimplemented from oofem::PlaneStress2d.

Definition at line 140 of file planestressgraddamage.C.

References oofem::GradientDamageElement::postInitialize().

Member Data Documentation

◆ locationArray_d

IntArray oofem::PlaneStressGradDamage::locationArray_d = {3,6,9,12}

staticprotected

Definition at line 50 of file planestressgraddamage.h.

Referenced by giveLocationArray_d().

◆ locationArray_u

IntArray oofem::PlaneStressGradDamage::locationArray_u = {1,2, 4,5, 7,8, 10,11}

staticprotected

Definition at line 49 of file planestressgraddamage.h.

Referenced by giveLocationArray_u().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Static Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ PlaneStressGradDamage()

◆ ~PlaneStressGradDamage()

Member Function Documentation

◆ computeBdMatrixAt()

◆ computeGaussPoints()

◆ computeNdMatrixAt()

◆ computeNumberOfDofs()

◆ computeStiffnessMatrix()

◆ giveClassName()

◆ giveDofManDofIDMask()

◆ giveDofManDofIDMask_d()

◆ giveDofManDofIDMask_u()

◆ giveInputRecordName()

◆ giveInternalForcesVector()

◆ giveLocationArray_d()

◆ giveLocationArray_u()

◆ giveMaterialMode()

◆ giveNLStructuralElement()

◆ giveStructuralElement()

◆ initializeFrom()

◆ postInitialize()

Member Data Documentation

◆ locationArray_d

◆ locationArray_u