3D Equal order linear Brick TS Element More...

Inheritance diagram for oofem::TMBrick11:

Collaboration diagram for oofem::TMBrick11:

Public Member Functions
	TMBrick11 (int n, Domain *d)
void	getDofManLocalCodeNumbers (IntArray &answer, const Variable::VariableQuantity q, int num) const override
void	getInternalDofManLocalCodeNumbers (IntArray &answer, const Variable::VariableQuantity q, int num) const override
void	giveDofManDofIDMask (int inode, IntArray &answer) const override
int	giveNumberOfDofs () override
const char *	giveInputRecordName () const override
const char *	giveClassName () const override
const FEInterpolation *	getGeometryInterpolation () const override
Element_Geometry_Type	giveGeometryType () const override
int	getNumberOfSurfaceDOFs () const override
int	getNumberOfEdgeDOFs () const override
void	getSurfaceLocalCodeNumbers (IntArray &answer, const Variable::VariableQuantity q) const override
void	getEdgeLocalCodeNumbers (IntArray &answer, const Variable::VariableQuantity q) const override
Interface *	giveInterface (InterfaceType it) override
Public Member Functions inherited from oofem::TMElement
	TMElement (int n, Domain *d)
void	giveCharacteristicMatrix (FloatMatrix &answer, CharType type, TimeStep *tStep) override
void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep) override
void	giveCharacteristicMatrixFromBC (FloatMatrix &answer, CharType type, TimeStep tStep, GeneralBoundaryCondition bc, int boundaryID) override
virtual void	giveCharacteristicVectorFromBC (FloatArray &answer, CharType type, ValueModeType mode, TimeStep tStep, GeneralBoundaryCondition bc, int boundaryID) override
void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true) override
void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true) override
void	computeLoadVector (FloatArray &answer, BodyLoad load, CharType type, ValueModeType mode, TimeStep tStep) override
int	computeFluxLBToLRotationMatrix (FloatMatrix &answer, int iSurf, const FloatArray &lc, const Variable::VariableQuantity q, char btype) override
Public Member Functions inherited from oofem::MPElement
	MPElement (int n, Domain *aDomain)
void	initialize ()
void	integrateTerm_dw (FloatMatrix &answer, const Term &term, IntegrationRule iRule, TimeStep tstep)
void	integrateTerm_c (FloatArray &answer, const Term &term, IntegrationRule iRule, TimeStep tstep)
void	integrateSurfaceTerm_dw (FloatMatrix &answer, const Term &term, IntegrationRule iRule, int isurf, TimeStep tstep)
void	integrateSurfaceTerm_c (FloatArray &answer, const Term &term, IntegrationRule iRule, int isurf, TimeStep tstep)
void	integrateEdgeTerm_dw (FloatMatrix &answer, const Term &term, IntegrationRule iRule, int iedge, TimeStep tstep)
void	integrateEdgeTerm_c (FloatArray &answer, const Term &term, IntegrationRule iRule, int iedge, TimeStep tstep)
virtual void	getLocalCodeNumbers (IntArray &answer, const Variable::VariableQuantity q) const
virtual void	getSurfaceElementCodeNumbers (IntArray &answer, const Variable::VariableQuantity q, int isurf) const
	Returns element code numbers of the unknowns associated with given boundary entity.
virtual void	getEdgeElementCodeNumbers (IntArray &answer, const Variable::VariableQuantity q, int isurf) const
virtual void	getBoundaryUnknownVector (FloatArray &answer, const Variable field, ValueModeType mode, int ibc, char bt, TimeStep tStep)
void	assembleTermContribution (FloatMatrix &answer, FloatMatrix &contrib, const Term &t)
	Assembles the partial element contribution into local element matrix.
void	assembleTermContributionT (FloatMatrix &answer, FloatMatrix &contrib, const Term &t)
void	assembleTermContribution (FloatArray &answer, FloatArray &contrib, const Term &t)
virtual const void	getUnknownVector (FloatArray &answer, const Variable field, ValueModeType mode, TimeStep tstep)
	Returns vector of nodal unknowns for given Variable.
virtual double	computeSurfaceVolumeAround (GaussPoint *igp, int iSurf)
virtual double	computeEdgeVolumeAround (GaussPoint *igp, int iEdge)
virtual double	computeVolumeAround (GaussPoint *igp) override
FEInterpolation *	giveInterpolation () const override
IntArray	giveBoundarySurfaceNodes (int boundary, bool includeHierarchical=false) const override
IntArray	giveBoundaryEdgeNodes (int boundary, bool includeHierarchical=false) const override
Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Element (const Element &src)=delete
Element &	operator= (const Element &src)=delete
virtual	~Element ()
	Virtual destructor.
void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual int	giveNumberOfInternalDofManagers () const
virtual DofManager *	giveInternalDofManager (int i) const
virtual void	setInternalDofManager (int num, std::unique_ptr< DofManager > dm)
virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
const IntArray &	giveBodyLoadList () const
const IntArray &	giveBoundaryLoadList () const
void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
virtual int	computeNumberOfDofs ()
virtual int	computeNumberOfGlobalDofs ()
int	computeNumberOfPrimaryMasterDofs ()
virtual bool	computeGtoLRotationMatrix (FloatMatrix &answer)
virtual bool	giveRotationMatrix (FloatMatrix &answer)
virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
virtual void	giveElementDofIDMask (IntArray &answer) const
virtual void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer)
virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension.
double	computeMeanSize ()
virtual double	computeVolume ()
virtual double	computeArea ()
virtual double	computeLength ()
virtual IntArray	giveBoundaryNodes (int boundary) const
virtual std::unique_ptr< IntegrationRule >	giveBoundaryEdgeIntegrationRule (int order, int boundary)
virtual std::unique_ptr< IntegrationRule >	giveBoundarySurfaceIntegrationRule (int order, int boundary)
int	giveDofManagerNumber (int i) const
const IntArray &	giveDofManArray () const
void	addDofManager (DofManager *dMan)
DofManager *	giveDofManager (int i) const
Node *	giveNode (int i) const
virtual ElementSide *	giveSide (int i) const
virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
virtual Material *	giveMaterial ()
int	giveMaterialNumber () const
CrossSection *	giveCrossSection ()
int	getActivityTimeFunctionNumber ()
void	setActivityTimeFunctionNumber (int funcIndx)
void	setMaterial (int matIndx)
virtual void	setCrossSection (int csIndx)
virtual int	giveNumberOfDofManagers () const
void	setNumberOfDofManagers (int i)
	Sets number of element dof managers.
virtual int	giveNumberOfNodes () const
void	setDofManagers (const IntArray &dmans)
void	setDofManager (int id, int dm)
void	setBodyLoads (const IntArray &bodyLoads)
void	setIntegrationRules (std ::vector< std ::unique_ptr< IntegrationRule > > irlist)
virtual integrationDomain	giveIntegrationDomain () const
virtual MaterialMode	giveMaterialMode ()
virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
int	giveRegionNumber ()
virtual void	updateInternalState (TimeStep *tStep)
virtual void	updateYourself (TimeStep *tStep)
virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
int	checkConsistency () override
virtual bool	isActivated (TimeStep *tStep)
virtual bool	isCast (TimeStep *tStep)
virtual void	initForNewStep ()
virtual Element_Geometry_Type	giveEdgeGeometryType (int id) const
	Returns the receiver edge geometry type.
virtual Element_Geometry_Type	giveSurfaceGeometryType (int id) const
	Returns the receiver surface geometry type.
virtual int	giveSpatialDimension ()
virtual int	giveNumberOfBoundarySides ()
	Returns number of boundaries (entities of element_dimension-1: points, edges, surfaces).
virtual int	giveNumberOfEdges () const
virtual int	giveNumberOfSurfaces () const
virtual int	giveDefaultIntegrationRule () const
virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
int	giveNumberOfIntegrationRules ()
virtual IntegrationRule *	giveIntegrationRule (int i)
std::vector< std ::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()
virtual int	testElementExtension (ElementExtension ext)
virtual int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
int	giveGlobalIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicLength (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method)
virtual double	giveParentElSize () const
virtual void	updateBeforeNonlocalAverage (TimeStep *tStep)
virtual int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords)
virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
virtual int	giveLocalCoordinateSystem (FloatMatrix &answer)
virtual void	giveLocalCoordinateSystemVector (InternalStateType isttype, FloatArray &answer)
virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
virtual int	adaptiveMap (Domain oldd, TimeStep tStep)
virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
virtual int	adaptiveUpdate (TimeStep *tStep)
virtual int	adaptiveFinish (TimeStep *tStep)
void	updateLocalNumbering (EntityRenumberingFunctor &f) override
template<class T>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f.
template<class T, class S>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array.
virtual void	drawYourself (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType)
virtual void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)
virtual int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep)
virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
virtual void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows sparse structure.
virtual void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness).
int	giveLabel () const
int	giveGlobalNumber () const
void	setGlobalNumber (int num)
elementParallelMode	giveParallelMode () const
void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element.
virtual elementParallelMode	giveKnotSpanParallelMode (int) const
int	packUnknowns (DataStream &buff, TimeStep *tStep)
int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
int	estimatePackSize (DataStream &buff)
const IntArray *	givePartitionList () const
void	setPartitionList (IntArray &pl)
virtual double	predictRelativeComputationalCost ()
virtual double	giveRelativeSelfComputationalCost ()
virtual double	predictRelativeRedistributionCost ()
IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element.
IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element.
void	initializeFrom (InputRecord &ir, int priority) override
void	initializeFinish () override
void	postInitialize () override
	Performs post initialization steps.
void	giveInputRecord (DynamicInputRecord &input) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
void	printOutputAt (FILE file, TimeStep tStep) override
virtual const IntArray	giveLocation ()
virtual void	recalculateCoordinates (int nodeNumber, FloatArray &coords)
void	setSharedEdgeID (int iedge, int globalID)
void	setSharedSurfaceID (int isurf, int globalID)
const IntArray *	giveSharedEdgeIDs () const
const IntArray *	giveSharedSurfaceIDs () const
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	initializeFrom (InputRecord &ir)
virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging.
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).
Public Member Functions inherited from oofem::ZZNodalRecoveryModelInterface
	ZZNodalRecoveryModelInterface (Element *element)
	Constructor.
virtual bool	ZZNodalRecoveryMI_computeNValProduct (FloatMatrix &answer, InternalStateType type, TimeStep *tStep)
virtual void	ZZNodalRecoveryMI_computeNNMatrix (FloatArray &answer, InternalStateType type)
Public Member Functions inherited from oofem::Interface
	Interface ()
	Constructor.
virtual	~Interface ()

Static Protected Attributes
static const FEI3dHexaLin	tInterpol
static const FEI3dHexaLin	uInterpol
static const Variable	t
static const Variable	u

Private Member Functions
virtual int	giveNumberOfUDofs () const override
virtual int	giveNumberOfTDofs () const override
virtual const Variable *	getU () const override
virtual const Variable *	getT () const override
void	computeGaussPoints () override

Additional Inherited Members
Static Public Attributes inherited from oofem::Element
static ParamKey	IPK_Element_mat
static ParamKey	IPK_Element_crosssect
static ParamKey	IPK_Element_nodes
static ParamKey	IPK_Element_bodyload
static ParamKey	IPK_Element_boundaryload
static ParamKey	IPK_Element_lcs
static ParamKey	IPK_Element_partitions
static ParamKey	IPK_Element_remote
static ParamKey	IPK_Element_activityTimeFunction
static ParamKey	IPK_Element_nip
Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers.
IntArray	dofManArray
	Array containing dofmanager numbers.
int	material
	Number of associated material.
int	crossSection
	Number of associated cross section.
IntArray	bodyLoadArray
IntArray	boundaryLoadArray
std::vector< std ::unique_ptr< IntegrationRule > >	integrationRulesArray
FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation.
int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element.
int	globalNumber
int	numberOfGaussPoints
elementParallelMode	parallel_mode
	Determines the parallel mode of the element.
IntArray	partitions
IntArray	globalEdgeIDs
IntArray	globalSurfaceIDs
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.

Detailed Description

3D Equal order linear Brick TS Element

Definition at line 324 of file tm.C.

Constructor & Destructor Documentation

◆ TMBrick11()

oofem::TMBrick11::TMBrick11	(	int	n,
		Domain *	d )

inline

Definition at line 334 of file tm.C.

References computeGaussPoints(), oofem::Element::numberOfDofMans, oofem::Element::numberOfGaussPoints, oofem::TMElement::TMElement(), and oofem::ZZNodalRecoveryModelInterface::ZZNodalRecoveryModelInterface().

Member Function Documentation

◆ computeGaussPoints()

void oofem::TMBrick11::computeGaussPoints ( )

inlineoverrideprivatevirtual

Initializes the array of integration rules member variable. Element can have multiple integration rules for different tasks. For example structural element family class uses this feature to implement transparent support for reduced and selective integration of some strain components. Must be defined by terminator classes.

See also: IntegrationRule

Reimplemented from oofem::Element.

Definition at line 395 of file tm.C.

References oofem::Element::integrationRulesArray, and oofem::Element::numberOfGaussPoints.

Referenced by TMBrick11().

◆ getDofManLocalCodeNumbers()

void oofem::TMBrick11::getDofManLocalCodeNumbers	(	IntArray &	answer,
		const Variable::VariableQuantity	q,
		int	n ) const

inlineoverridevirtual

Returns local code numbers corresponding to specific variable identified by variablequantity. This essentialy allows to assemble partial element contributions separately. It is assumed, that partial element contributions are obtained using standard getCharacteristicMatrix and getCharacteristicVector methods.

Parameters

answer	code numbers corrresponding to given variable
q	variable type

Implements oofem::MPElement.

Definition at line 342 of file tm.C.

◆ getEdgeLocalCodeNumbers()

void oofem::TMBrick11::getEdgeLocalCodeNumbers	(	IntArray &	answer,
		const Variable::VariableQuantity	q ) const

inlineoverridevirtual

Implements oofem::MPElement.

Definition at line 379 of file tm.C.

◆ getGeometryInterpolation()

const FEInterpolation * oofem::TMBrick11::getGeometryInterpolation ( ) const

inlineoverridevirtual

Returns the geometry interpolation for the receiver.

Returns: Appropriate interpolation, or NULL if none exists.

Reimplemented from oofem::Element.

Definition at line 365 of file tm.C.

◆ getInternalDofManLocalCodeNumbers()

void oofem::TMBrick11::getInternalDofManLocalCodeNumbers	(	IntArray &	answer,
		const Variable::VariableQuantity	q,
		int	num ) const

inlineoverridevirtual

Implements oofem::MPElement.

Definition at line 353 of file tm.C.

◆ getNumberOfEdgeDOFs()

int oofem::TMBrick11::getNumberOfEdgeDOFs ( ) const

inlineoverridevirtual

Implements oofem::MPElement.

Definition at line 371 of file tm.C.

◆ getNumberOfSurfaceDOFs()

int oofem::TMBrick11::getNumberOfSurfaceDOFs ( ) const

inlineoverridevirtual

Implements oofem::MPElement.

Definition at line 370 of file tm.C.

◆ getSurfaceLocalCodeNumbers()

void oofem::TMBrick11::getSurfaceLocalCodeNumbers	(	IntArray &	answer,
		const Variable::VariableQuantity	q ) const

inlineoverridevirtual

Returns mapping from quantity dofs to local surface dofs

Implements oofem::MPElement.

Definition at line 372 of file tm.C.

◆ getT()

virtual const Variable * oofem::TMBrick11::getT ( ) const

inlineoverrideprivatevirtual

Implements oofem::TMElement.

Definition at line 394 of file tm.C.

References t.

◆ getU()

virtual const Variable * oofem::TMBrick11::getU ( ) const

inlineoverrideprivatevirtual

Implements oofem::TMElement.

Definition at line 393 of file tm.C.

References u.

◆ giveClassName()

const char * oofem::TMBrick11::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Reimplemented from oofem::Element.

Definition at line 362 of file tm.C.

◆ giveDofManDofIDMask()

void oofem::TMBrick11::giveDofManDofIDMask	(	int	inode,
		IntArray &	answer ) const

inlineoverridevirtual

Returns dofmanager dof mask for node. This mask defines the dofs which are used by element in node. Mask influences the code number ordering for particular node. Code numbers are ordered according to node order and dofs belonging to particular node are ordered according to this mask. If element requests dofs using node mask which are not in node then error is generated. This masking allows node to be shared by different elements with different dofs in same node. Elements local code numbers are extracted from node using this mask. Must be defined by particular element.

Parameters

inode	Mask is computed for local dofmanager with inode number.
answer	Mask for node.

Reimplemented from oofem::Element.

Definition at line 357 of file tm.C.

◆ giveGeometryType()

Element_Geometry_Type oofem::TMBrick11::giveGeometryType ( ) const

inlineoverridevirtual

Returns the element geometry type. This information is assumed to be of general interest, but it is required only for some specialized tasks.

Returns: Geometry type of element.

Implements oofem::Element.

Definition at line 367 of file tm.C.

◆ giveInputRecordName()

const char * oofem::TMBrick11::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Implements oofem::FEMComponent.

Definition at line 361 of file tm.C.

◆ giveInterface()

Interface * oofem::TMBrick11::giveInterface ( InterfaceType t )

inlineoverridevirtual

Interface requesting service.

See also: InterfaceType

Returns: Requested interface if implemented, otherwise NULL.

Reimplemented from oofem::FEMComponent.

Definition at line 380 of file tm.C.

References oofem::ZZNodalRecoveryModelInterfaceType.

◆ giveNumberOfDofs()

int oofem::TMBrick11::giveNumberOfDofs ( )

inlineoverridevirtual

Returns: Number of DOFs in element.

Reimplemented from oofem::Element.

Definition at line 360 of file tm.C.

◆ giveNumberOfTDofs()

virtual int oofem::TMBrick11::giveNumberOfTDofs ( ) const

inlineoverrideprivatevirtual

Implements oofem::TMElement.

Definition at line 392 of file tm.C.

◆ giveNumberOfUDofs()

virtual int oofem::TMBrick11::giveNumberOfUDofs ( ) const

inlineoverrideprivatevirtual

Implements oofem::TMElement.

Definition at line 391 of file tm.C.

Member Data Documentation

◆ t

const Variable oofem::TMBrick11::t

staticprotected

Definition at line 330 of file tm.C.

Referenced by getT().

◆ tInterpol

const Variable TMBrick11::t & oofem::TMBrick11::tInterpol

staticprotected

Definition at line 328 of file tm.C.

◆ u

const Variable oofem::TMBrick11::u

staticprotected

Definition at line 331 of file tm.C.

Referenced by getU().

◆ uInterpol

const Variable TMBrick11::u & oofem::TMBrick11::uInterpol

staticprotected

Definition at line 329 of file tm.C.

The documentation for this class was generated from the following file:

tm.C

Public Member Functions

Static Protected Attributes

Private Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ TMBrick11()

Member Function Documentation

◆ computeGaussPoints()

◆ getDofManLocalCodeNumbers()

◆ getEdgeLocalCodeNumbers()

◆ getGeometryInterpolation()

◆ getInternalDofManLocalCodeNumbers()

◆ getNumberOfEdgeDOFs()

◆ getNumberOfSurfaceDOFs()

◆ getSurfaceLocalCodeNumbers()

◆ getT()

◆ getU()

◆ giveClassName()

◆ giveDofManDofIDMask()

◆ giveGeometryType()

◆ giveInputRecordName()

◆ giveInterface()

◆ giveNumberOfDofs()

◆ giveNumberOfTDofs()

◆ giveNumberOfUDofs()

Member Data Documentation

◆ t

◆ tInterpol

◆ u

◆ uInterpol