Differences

This shows you the differences between two versions of the page.

--- tailorcrete:tailorcrete [2012/06/18 14:07] – kolarfil
+++ tailorcrete:tailorcrete [2012/11/14 09:32] (current) – [Examples of SCC flow analyses] bp
@@ Line 1: / Line 1: @@
-====== CTU TailorCrete project ======
+====== OOFEM@TailorCrete ======
+The [[http://www.tailorcrete.com|TailorCrete project]] has been launched to develop an integrated, automated process to enable cost-effective use of concrete in buildings and structures that embody individualized solutions to chalenges of function, climate, location, and aesthetics. It applies new digital design tools, on-site and off-site robotics, and automated formwork and reinforcement systems to bring concrete technology up-to date with the potentials of contemporary architecture.
-Purpose of this page is to show how simple examples of fresh concrete casting simulations can be done using OOFEM. Examples of input files with an appropriate description can be found here.
+[[http://www.oofem.org|OOFEM]] simulation software is used in the frame of this project to simulate the flow of self compacting concrete in complex shaped formworks. The computational model has been described in deliverables and reports submitted in the frame of workpackage 6 of the TailorCrete project.
-==== Examples with casting simulations ====
+This page serves as starting point for TailorCrete partners, containing examples of solved problems and links to useful material.
-  * V-funnel simulation
-V-funnel problem is one of the first problem, that was modeled. In it's easiest form is modeled in 2D. The geometry is shown at figure below.
-{{:tailorcrete:v_funnel_geometry.png?200|}}
-On the next picture is mesh used for simulation.
-{{:tailorcrete:v-funnel_geometry.png?200|}}
-{{:tailorcrete:vfunnel_tau60_mu20_beta0.2_oofem.in|}}
-V-funnel test is focused on boundary condition influence.
-  * Slump flow test (Abrams cone)
-Slump flow test is a typical test for verifying the effect of yield stress. Here, it is modeled as an axisymmetric problem and Abrams cone geometry was considered (on the pic. below)
-{{:tailorcrete:abrams_cone_geom.png?200|}}
+==== OOFEM related links ====
+  * Official pages of [[http://www.oofem.org|OOFEM project]]
+  * Direct link to OOFEM [[http://www.oofem.org/en/documentation/manual.html|documentation]], including Input format specification.
+  * [[tailorcrete:input_file_description|Extract]] from input description, focused on flow modeling
+==== Examples of SCC flow analyses ====
+This section contains links to examples, with their description, corresponding simualtion inputs, and selected resutls.
+  * [[tailorcrete:examples:v-funnel|V-funnel]] test
+  * [[tailorcrete:examples:slump-flow|Slump flow simulation]]
+  * Simulation of [[tailorcrete:examples:lcpc_box|LCPC Box test]] (3D)
+  * Simulation of [[tailorcrete:examples:el_caleyo|El-Caleyo formwork casting]]
+  * Dragados wall [[tailorcrete:examples:dra_wall_01|Dragados-wall casting]]