Class implementing a concentrated load (force, moment,...) that acts directly on a dof manager (node or element side, if it has associated DOFs). More...

#include <nodalload.h>

Inheritance diagram for oofem::NodalLoad:

Collaboration diagram for oofem::NodalLoad:

Public Member Functions
	NodalLoad (int n, Domain *d)
	Constructor. More...

virtual const char *	giveInputRecordName () const

virtual void	computeValueAt (FloatArray &answer, TimeStep *tStep, const FloatArray &coords, ValueModeType mode)
	Computes components values of load at given point - global coordinates (coordinates given). More...

virtual CoordSystType	giveCoordSystMode ()
	Returns receiver's coordinate system. More...

virtual IRResultType	initializeFrom (InputRecord *ir)
	Initializes receiver according to object description stored in input record. More...

virtual void	giveInputRecord (DynamicInputRecord &input)
	Setups the input record string of receiver. More...

virtual const char *	giveClassName () const

virtual bcGeomType	giveBCGeoType () const
	Returns geometry character of boundary condition. More...

Public Member Functions inherited from oofem::Load
	Load (int n, Domain *d)
	Constructor. More...

virtual	~Load ()
	Destructor. More...

virtual void	computeComponentArrayAt (FloatArray &answer, TimeStep *tStep, ValueModeType mode)
	Computes boundary condition value - its components values at given time. More...

virtual void	computeValues (FloatArray &answer, TimeStep *tStep, const FloatArray &coords, const IntArray &dofids, ValueModeType mode)
	Computes components values for specified dof ids. More...

int	isDofExcluded (int index)
	Returns the value of dofExcludeMask corresponding to given index. More...

virtual void	scale (double s)
	Scales the receiver according to given value. More...

virtual FormulationType	giveFormulationType ()
	Specifies is load should take local or global coordinates. More...

virtual int	giveApproxOrder ()

virtual double	giveProperty (int aProperty, TimeStep *tStep)
	Returns the value of a property 'aProperty'. More...

const FloatArray &	giveComponentArray () const

void	setComponentArray (FloatArray &arry)

Public Member Functions inherited from oofem::GeneralBoundaryCondition
	GeneralBoundaryCondition (int n, Domain *d)
	Constructor. More...

virtual	~GeneralBoundaryCondition ()
	Destructor. More...

int	giveSetNumber ()
	Gives the set number which boundary condition is applied to. More...

virtual int	giveNumberOfInternalDofManagers ()
	Gives the number of internal dof managers. More...

virtual DofManager *	giveInternalDofManager (int i)
	Gives an internal dof manager from receiver. More...

Function *	giveTimeFunction ()

virtual bcValType	giveBCValType () const
	Returns receiver load type. More...

virtual bool	isImposed (TimeStep *tStep)
	Returns nonzero if receiver representing BC is imposed at given time, otherwise returns zero. More...

virtual const IntArray &	giveDofIDs () const
	Array with default dofs which b.c. More...

virtual bcType	giveType () const

virtual void	postInitialize ()
	Performs post initialization steps. More...

virtual contextIOResultType	saveContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Stores receiver state to output stream. More...

virtual contextIOResultType	restoreContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Restores the receiver state previously written in stream. More...

Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
	Regular constructor, creates component with given number and belonging to given domain. More...

virtual	~FEMComponent ()
	Virtual destructor. More...

Domain *	giveDomain () const

virtual void	setDomain (Domain *d)
	Sets associated Domain. More...

int	giveNumber () const

void	setNumber (int num)
	Sets number of receiver. More...

virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
	Local renumbering support. More...

virtual int	checkConsistency ()
	Allows programmer to test some internal data, before computation begins. More...

virtual void	printOutputAt (FILE file, TimeStep tStep)
	Prints output of receiver to stream, for given time step. More...

virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging. More...

virtual Interface *	giveInterface (InterfaceType t)
	Interface requesting service. More...

std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros). More...

Protected Attributes
CoordSystType	coordSystemType
	Load coordinate system. More...

Protected Attributes inherited from oofem::Load
FloatArray	componentArray
	Components of boundary condition. More...

IntArray	dofExcludeMask
	The load is specified for all dofs of object to which is associated. More...

Protected Attributes inherited from oofem::GeneralBoundaryCondition
int	timeFunction
	Associated load time function. More...

bcValType	valType
	Physical meaning of BC value. More...

IntArray	dofs
	Dofs that b.c. is applied to (relevant for Dirichlet type b.c.s). More...

int	isImposedTimeFunction
	Zero by default - the BC is than always imposed. More...

int	set
	Set number for boundary condition to be applied to. More...

Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number. More...

Domain *	domain
	Link to domain object, useful for communicating with other FEM components. More...

Additional Inherited Members
Public Types inherited from oofem::Load
enum	CoordSystType { CST_Global, CST_Local, CST_UpdatedGlobal }
	Load coordinate system type. More...

enum	FormulationType { FT_Entity, FT_Global }
	Type determining the type of formulation (entity local or global one). More...

Public Attributes inherited from oofem::Load
bool	reference

Detailed Description

Class implementing a concentrated load (force, moment,...) that acts directly on a dof manager (node or element side, if it has associated DOFs).

This load could not be applied on an element. A nodal load is usually attribute of one or more nodes or element sides.

The component array, which size should be same as number of DOFs in particular node/side is read from input.

The attribute componentArray contains, for example for the case of a plane beam structure, 2 forces and 1 moment on a right place. (6 dof per node is assumed)

Note: {Load is not restricted to structural problems. For example, in thermal analysis, a nodal load would be a concentrated heat source.}

Definition at line 67 of file nodalload.h.

Constructor & Destructor Documentation

oofem::NodalLoad::NodalLoad	(	int	n,
		Domain *	d
	)

inline

Constructor.

Creates nodal load object with given number, belonging to given domain.

Parameters

n	Load number.
d	Domain to which new object will belongs.

Definition at line 83 of file nodalload.h.

Member Function Documentation

virtual void oofem::NodalLoad::computeValueAt	(	FloatArray &	answer,
		TimeStep *	tStep,
		const FloatArray &	coords,
		ValueModeType	mode
	)

inlinevirtual

Computes components values of load at given point - global coordinates (coordinates given).

Parameters

answer	Component values at given point and time.
tStep	Time step representing time.
coords	Global (or local) problem coordinates, which are used to evaluate components values.
mode	Determines response mode.

Implements oofem::Load.

Definition at line 86 of file nodalload.h.

virtual bcGeomType oofem::NodalLoad::giveBCGeoType ( ) const

inlinevirtual

Returns geometry character of boundary condition.

For available values see cltypes.h file. Derived classes should always overload, default implementation returns UnknownLoadGT value.

Reimplemented from oofem::GeneralBoundaryCondition.

Definition at line 93 of file nodalload.h.

References oofem::NodalLoadBGT.

Referenced by oofem::Node::computeLoadVector().

virtual const char* oofem::NodalLoad::giveClassName ( ) const

inlinevirtual

Returns: Class name of the receiver.

Implements oofem::FEMComponent.

Definition at line 92 of file nodalload.h.

virtual CoordSystType oofem::NodalLoad::giveCoordSystMode ( )

inlinevirtual

Returns receiver's coordinate system.

Reimplemented from oofem::Load.

Definition at line 88 of file nodalload.h.

Referenced by oofem::Node::computeLoadVector().

void oofem::NodalLoad::giveInputRecord ( DynamicInputRecord & input )

virtual

Setups the input record string of receiver.

Parameters

input Dynamic input record to be filled by receiver.

Reimplemented from oofem::Load.

Definition at line 55 of file nodalload.C.

References _IFT_NodalLoad_cstype, coordSystemType, oofem::Load::giveInputRecord(), and oofem::DynamicInputRecord::setField().

virtual const char* oofem::NodalLoad::giveInputRecordName ( ) const

inlinevirtual

Returns: Input record name of the receiver.

Implements oofem::FEMComponent.

Definition at line 85 of file nodalload.h.

References _IFT_NodalLoad_Name.

IRResultType oofem::NodalLoad::initializeFrom ( InputRecord * ir )

virtual

Initializes receiver according to object description stored in input record.

This function is called immediately after creating object using constructor. Input record can be imagined as data record in component database belonging to receiver. Receiver may use value-name extracting functions to extract particular field from record.

See also: IR_GIVE_FIELD; IR_GIVE_OPTIONAL_FIELD

Parameters

ir	Input record to initialize from.

Returns: IRResultType

Reimplemented from oofem::Load.

Definition at line 43 of file nodalload.C.

References _IFT_NodalLoad_cstype, coordSystemType, oofem::Load::initializeFrom(), and IR_GIVE_OPTIONAL_FIELD.

Member Data Documentation

CoordSystType oofem::NodalLoad::coordSystemType

protected

Load coordinate system.

It is actually used only when local coordinate system in node is defined and load is specified in global coordinate system

Definition at line 75 of file nodalload.h.

Referenced by giveInputRecord(), and initializeFrom().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation