|
OOFEM 3.0
|
#include <ltrspace.h>
Public Member Functions | |
| LTRSpace (int n, Domain *d) | |
| virtual | ~LTRSpace () |
| FEInterpolation * | giveInterpolation () const override |
| void | computeLumpedMassMatrix (FloatMatrix &answer, TimeStep *tStep) override |
| int | giveNumberOfIPForMassMtrxIntegration () override |
| Interface * | giveInterface (InterfaceType it) override |
| const char * | giveInputRecordName () const override |
| const char * | giveClassName () const override |
| Element_Geometry_Type | giveGeometryType () const override |
| void | drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep) override |
| void | drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType) override |
| void | drawScalar (oofegGraphicContext &gc, TimeStep *tStep) override |
| void | drawSpecial (oofegGraphicContext &gc, TimeStep *tStep) override |
| double | giveRelativeSelfComputationalCost () override |
| void | NodalAveragingRecoveryMI_computeNodalValue (FloatArray &answer, int node, InternalStateType type, TimeStep *tStep) override |
| void | SPRNodalRecoveryMI_giveSPRAssemblyPoints (IntArray &pap) override |
| void | SPRNodalRecoveryMI_giveDofMansDeterminedByPatch (IntArray &answer, int pap) override |
| int | SPRNodalRecoveryMI_giveNumberOfIP () override |
| SPRPatchType | SPRNodalRecoveryMI_givePatchType () override |
| void | HuertaErrorEstimatorI_setupRefinedElementProblem (RefinedElement *refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode sMode, TimeStep *tStep, int &localNodeId, int &localElemId, int &localBcId, IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode) override |
| void | HuertaErrorEstimatorI_computeNmatrixAt (GaussPoint *gp, FloatMatrix &answer) override |
| Public Member Functions inherited from oofem::Structural3DElement | |
| Structural3DElement (int n, Domain *d) | |
| virtual | ~Structural3DElement () |
| Destructor. | |
| void | initializeFrom (InputRecord &ir, int priority) override |
| MaterialMode | giveMaterialMode () override |
| int | computeNumberOfDofs () override |
| void | giveDofManDofIDMask (int inode, IntArray &answer) const override |
| double | computeVolumeAround (GaussPoint *gp) override |
| double | giveCharacteristicLength (const FloatArray &normalToCrackPlane) override |
| void | giveMaterialOrientationAt (FloatArray &x, FloatArray &y, FloatArray &z, const FloatArray &lcoords) |
| void | computeStressVector (FloatArray &answer, const FloatArray &strain, GaussPoint *gp, TimeStep *tStep) override |
| void | computeConstitutiveMatrixAt (FloatMatrix &answer, MatResponseMode rMode, GaussPoint *gp, TimeStep *tStep) override |
| void | computeConstitutiveMatrix_dPdF_At (FloatMatrix &answer, MatResponseMode rMode, GaussPoint *gp, TimeStep *tStep) override |
| void | computeInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep) override |
| Public Member Functions inherited from oofem::NLStructuralElement | |
| NLStructuralElement (int n, Domain *d) | |
| virtual | ~NLStructuralElement () |
| Destructor. | |
| int | giveGeometryMode () |
| void | computeFirstPKStressVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep) |
| void | computeCauchyStressVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep) |
| void | computeStiffnessMatrix (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) override |
| void | computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) |
| void | giveInternalForcesVector (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override |
| void | giveInternalForcesVector_withIRulesAsSubcells (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override |
| virtual void | computeDeformationGradientVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep) |
| double | computeCurrentVolume (TimeStep *tStep) |
| void | giveInputRecord (DynamicInputRecord &input) override |
| const char * | giveClassName () const override |
| Public Member Functions inherited from oofem::StructuralElement | |
| StructuralElement (int n, Domain *d) | |
| virtual | ~StructuralElement () |
| Destructor. | |
| void | giveCharacteristicMatrix (FloatMatrix &answer, CharType, TimeStep *tStep) override |
| void | giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep) override |
| virtual void | computeMassMatrix (FloatMatrix &answer, TimeStep *tStep) |
| virtual void | computeConsistentMassMatrix (FloatMatrix &answer, TimeStep *tStep, double &mass, const double *ipDensity=NULL) |
| virtual void | giveMassMtrxIntegrationgMask (IntArray &answer) |
| void | computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) |
| virtual void | computeLumpedInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep) |
| void | computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer) override |
| virtual void | computeStrainVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep) |
| int | giveIPValue (FloatArray &answer, GaussPoint *gp, InternalStateType type, TimeStep *tStep) override |
| virtual void | computeResultingIPTemperatureAt (FloatArray &answer, TimeStep *tStep, GaussPoint *gp, ValueModeType mode) |
| virtual void | computeResultingIPEigenstrainAt (FloatArray &answer, TimeStep *tStep, GaussPoint *gp, ValueModeType mode) |
| virtual void | computeNmatrixAt (const FloatArray &iLocCoord, FloatMatrix &answer) |
| void | updateBeforeNonlocalAverage (TimeStep *tStep) override |
| virtual void | giveNonlocalLocationArray (IntArray &locationArray, const UnknownNumberingScheme &us) |
| virtual void | addNonlocalStiffnessContributions (SparseMtrx &dest, const UnknownNumberingScheme &s, TimeStep *tStep) |
| int | adaptiveUpdate (TimeStep *tStep) override |
| void | updateInternalState (TimeStep *tStep) override |
| void | updateYourself (TimeStep *tStep) override |
| int | checkConsistency () override |
| void | giveInputRecord (DynamicInputRecord &input) override |
| const char * | giveClassName () const override |
| int | giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep) override |
| void | showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override |
| Shows sparse structure. | |
| void | showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override |
| Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness). | |
| void | computeLoadVector (FloatArray &answer, BodyLoad *load, CharType type, ValueModeType mode, TimeStep *tStep) override |
| void | computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad *load, int boundary, CharType type, ValueModeType mode, TimeStep *tStep, bool global=true) override |
| void | computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad *load, int boundary, CharType type, ValueModeType mode, TimeStep *tStep, bool global=true) override |
| virtual void | computeEdgeNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords) |
| computes edge interpolation matrix | |
| virtual void | computeSurfaceNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords) |
| StructuralCrossSection * | giveStructuralCrossSection () |
| Helper function which returns the structural cross-section for the element. | |
| virtual void | createMaterialStatus () |
| Public Member Functions inherited from oofem::Element | |
| Element (int n, Domain *aDomain) | |
| Element (const Element &src)=delete | |
| Element & | operator= (const Element &src)=delete |
| virtual | ~Element () |
| Virtual destructor. | |
| void | giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const |
| void | giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const |
| virtual void | giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) |
| virtual void | giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) |
| virtual int | giveNumberOfDofs () |
| virtual int | giveNumberOfInternalDofManagers () const |
| virtual DofManager * | giveInternalDofManager (int i) const |
| virtual void | setInternalDofManager (int num, std::unique_ptr< DofManager > dm) |
| virtual double | giveCharacteristicValue (CharType type, TimeStep *tStep) |
| virtual void | computeTangentFromSurfaceLoad (FloatMatrix &answer, BoundaryLoad *load, int boundary, MatResponseMode rmode, TimeStep *tStep) |
| virtual void | computeTangentFromEdgeLoad (FloatMatrix &answer, BoundaryLoad *load, int boundary, MatResponseMode rmode, TimeStep *tStep) |
| const IntArray & | giveBodyLoadList () const |
| const IntArray & | giveBoundaryLoadList () const |
| void | computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer) |
| void | computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false) |
| void | computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false) |
| void | computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false) |
| void | computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer) |
| void | computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer) |
| virtual int | computeNumberOfGlobalDofs () |
| int | computeNumberOfPrimaryMasterDofs () |
| virtual bool | computeGtoLRotationMatrix (FloatMatrix &answer) |
| virtual bool | giveRotationMatrix (FloatMatrix &answer) |
| virtual bool | computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal) |
| virtual void | giveInternalDofManDofIDMask (int inode, IntArray &answer) const |
| virtual void | giveElementDofIDMask (IntArray &answer) const |
| virtual double | computeVolumeAreaOrLength () |
| Computes the volume, area or length of the element depending on its spatial dimension. | |
| double | computeMeanSize () |
| virtual double | computeVolume () |
| virtual double | computeArea () |
| virtual double | computeLength () |
| virtual IntArray | giveBoundaryEdgeNodes (int boundary, bool includeHierarchical=false) const |
| virtual IntArray | giveBoundarySurfaceNodes (int boundary, bool includeHierarchical=false) const |
| virtual IntArray | giveBoundaryNodes (int boundary) const |
| virtual std::unique_ptr< IntegrationRule > | giveBoundaryEdgeIntegrationRule (int order, int boundary) |
| virtual std::unique_ptr< IntegrationRule > | giveBoundarySurfaceIntegrationRule (int order, int boundary) |
| int | giveDofManagerNumber (int i) const |
| const IntArray & | giveDofManArray () const |
| void | addDofManager (DofManager *dMan) |
| DofManager * | giveDofManager (int i) const |
| Node * | giveNode (int i) const |
| virtual ElementSide * | giveSide (int i) const |
| virtual FEInterpolation * | giveInterpolation (DofIDItem id) const |
| virtual const FEInterpolation * | getGeometryInterpolation () const |
| virtual Material * | giveMaterial () |
| int | giveMaterialNumber () const |
| CrossSection * | giveCrossSection () |
| int | getActivityTimeFunctionNumber () |
| void | setActivityTimeFunctionNumber (int funcIndx) |
| void | setMaterial (int matIndx) |
| virtual void | setCrossSection (int csIndx) |
| virtual int | giveNumberOfDofManagers () const |
| void | setNumberOfDofManagers (int i) |
| Sets number of element dof managers. | |
| virtual int | giveNumberOfNodes () const |
| void | setDofManagers (const IntArray &dmans) |
| void | setDofManager (int id, int dm) |
| void | setBodyLoads (const IntArray &bodyLoads) |
| void | setIntegrationRules (std ::vector< std ::unique_ptr< IntegrationRule > > irlist) |
| virtual integrationDomain | giveIntegrationDomain () const |
| virtual int | giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie) |
| int | giveRegionNumber () |
| virtual void | initializeYourself (TimeStep *timeStepWhenICApply) |
| virtual bool | isActivated (TimeStep *tStep) |
| virtual bool | isCast (TimeStep *tStep) |
| virtual void | initForNewStep () |
| virtual Element_Geometry_Type | giveEdgeGeometryType (int id) const |
| Returns the receiver edge geometry type. | |
| virtual Element_Geometry_Type | giveSurfaceGeometryType (int id) const |
| Returns the receiver surface geometry type. | |
| virtual int | giveSpatialDimension () |
| virtual int | giveNumberOfBoundarySides () |
| Returns number of boundaries (entities of element_dimension-1: points, edges, surfaces). | |
| virtual int | giveNumberOfEdges () const |
| virtual int | giveNumberOfSurfaces () const |
| virtual int | giveDefaultIntegrationRule () const |
| virtual IntegrationRule * | giveDefaultIntegrationRulePtr () |
| int | giveNumberOfIntegrationRules () |
| virtual IntegrationRule * | giveIntegrationRule (int i) |
| std::vector< std ::unique_ptr< IntegrationRule > > & | giveIntegrationRulesArray () |
| int | giveGlobalIPValue (FloatArray &answer, GaussPoint *gp, InternalStateType type, TimeStep *tStep) |
| virtual double | giveLengthInDir (const FloatArray &normalToCrackPlane) |
| double | giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane) |
| double | giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane) |
| virtual double | giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method) |
| virtual double | giveParentElSize () const |
| virtual int | computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords) |
| virtual bool | computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords) |
| virtual int | giveLocalCoordinateSystem (FloatMatrix &answer) |
| virtual void | giveLocalCoordinateSystemVector (InternalStateType isttype, FloatArray &answer) |
| virtual void | computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp) |
| virtual int | adaptiveMap (Domain *oldd, TimeStep *tStep) |
| virtual int | mapStateVariables (Domain &iOldDom, const TimeStep &iTStep) |
| virtual int | adaptiveFinish (TimeStep *tStep) |
| void | updateLocalNumbering (EntityRenumberingFunctor &f) override |
| template<class T> | |
| void | ipEvaluator (T *src, void(T ::*f)(GaussPoint *gp)) |
| Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f. | |
| template<class T, class S> | |
| void | ipEvaluator (T *src, void(T ::*f)(GaussPoint *, S &), S &_val) |
| Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array. | |
| virtual void | drawYourself (oofegGraphicContext &gc, TimeStep *tStep) |
| virtual void | drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep) |
| virtual void | giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax) |
| virtual int | giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep) |
| int | giveLabel () const |
| int | giveGlobalNumber () const |
| void | setGlobalNumber (int num) |
| elementParallelMode | giveParallelMode () const |
| void | setParallelMode (elementParallelMode _mode) |
| Sets parallel mode of element. | |
| virtual elementParallelMode | giveKnotSpanParallelMode (int) const |
| int | packUnknowns (DataStream &buff, TimeStep *tStep) |
| int | unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep) |
| int | estimatePackSize (DataStream &buff) |
| const IntArray * | givePartitionList () const |
| void | setPartitionList (IntArray &pl) |
| virtual double | predictRelativeComputationalCost () |
| virtual double | predictRelativeRedistributionCost () |
| IntArray * | giveBodyLoadArray () |
| Returns array containing load numbers of loads acting on element. | |
| IntArray * | giveBoundaryLoadArray () |
| Returns array containing load numbers of boundary loads acting on element. | |
| void | initializeFinish () override |
| void | postInitialize () override |
| Performs post initialization steps. | |
| void | saveContext (DataStream &stream, ContextMode mode) override |
| void | restoreContext (DataStream &stream, ContextMode mode) override |
| void | printOutputAt (FILE *file, TimeStep *tStep) override |
| virtual const IntArray | giveLocation () |
| virtual void | recalculateCoordinates (int nodeNumber, FloatArray &coords) |
| void | setSharedEdgeID (int iedge, int globalID) |
| void | setSharedSurfaceID (int isurf, int globalID) |
| const IntArray * | giveSharedEdgeIDs () const |
| const IntArray * | giveSharedSurfaceIDs () const |
| Public Member Functions inherited from oofem::FEMComponent | |
| FEMComponent (int n, Domain *d) | |
| virtual | ~FEMComponent ()=default |
| Virtual destructor. | |
| Domain * | giveDomain () const |
| virtual void | setDomain (Domain *d) |
| int | giveNumber () const |
| void | setNumber (int num) |
| virtual void | initializeFrom (InputRecord &ir) |
| virtual void | printYourself () |
| Prints receiver state on stdout. Useful for debugging. | |
| std::string | errorInfo (const char *func) const |
| Returns string for prepending output (used by error reporting macros). | |
| Public Member Functions inherited from oofem::ZZNodalRecoveryModelInterface | |
| ZZNodalRecoveryModelInterface (Element *element) | |
| Constructor. | |
| virtual bool | ZZNodalRecoveryMI_computeNValProduct (FloatMatrix &answer, InternalStateType type, TimeStep *tStep) |
| virtual void | ZZNodalRecoveryMI_computeNNMatrix (FloatArray &answer, InternalStateType type) |
| Public Member Functions inherited from oofem::Interface | |
| Interface () | |
| Constructor. | |
| virtual | ~Interface () |
| Public Member Functions inherited from oofem::NodalAveragingRecoveryModelInterface | |
| NodalAveragingRecoveryModelInterface () | |
| Constructor. | |
| Public Member Functions inherited from oofem::SPRNodalRecoveryModelInterface | |
| SPRNodalRecoveryModelInterface () | |
| Constructor. | |
| Public Member Functions inherited from oofem::SpatialLocalizerInterface | |
| SpatialLocalizerInterface (Element *element) | |
| virtual int | SpatialLocalizerI_containsPoint (const FloatArray &coords) |
| int | SpatialLocalizerI_BBoxContainsPoint (const FloatArray &coords) |
| virtual void | SpatialLocalizerI_giveBBox (FloatArray &bb0, FloatArray &bb1) |
| virtual double | SpatialLocalizerI_giveClosestPoint (FloatArray &lcoords, FloatArray &closest, const FloatArray &gcoords) |
| Public Member Functions inherited from oofem::ZZErrorEstimatorInterface | |
| ZZErrorEstimatorInterface (Element *element) | |
| Constructor. | |
| virtual void | ZZErrorEstimatorI_computeElementContributions (double &eNorm, double &sNorm, ZZErrorEstimator ::NormType norm, InternalStateType type, TimeStep *tStep) |
| virtual IntegrationRule * | ZZErrorEstimatorI_giveIntegrationRule () |
| virtual void | ZZErrorEstimatorI_computeLocalStress (FloatArray &answer, FloatArray &sig) |
| Public Member Functions inherited from oofem::HuertaErrorEstimatorInterface | |
| HuertaErrorEstimatorInterface () | |
| Constructor. | |
Static Protected Attributes | |
| static FEI3dTetLin | interpolation |
| Static Protected Attributes inherited from oofem::Structural3DElement | |
| static ParamKey | IPK_Structural3DElement_materialCoordinateSystem |
| [optional] Material coordinate system (local) for the element. | |
| Static Protected Attributes inherited from oofem::NLStructuralElement | |
| static ParamKey | IPK_NLStructuralElement_nlgeoflag |
Additional Inherited Members | |
| Public Types inherited from oofem::HuertaErrorEstimatorInterface | |
| enum | SetupMode { CountMode = 0 , NodeMode = 1 , ElemMode = 2 , BCMode = 3 } |
| Mode for problem setup. More... | |
| Static Public Attributes inherited from oofem::Element | |
| static ParamKey | IPK_Element_mat |
| static ParamKey | IPK_Element_crosssect |
| static ParamKey | IPK_Element_nodes |
| static ParamKey | IPK_Element_bodyload |
| static ParamKey | IPK_Element_boundaryload |
| static ParamKey | IPK_Element_lcs |
| static ParamKey | IPK_Element_partitions |
| static ParamKey | IPK_Element_remote |
| static ParamKey | IPK_Element_activityTimeFunction |
| static ParamKey | IPK_Element_nip |
| Protected Member Functions inherited from oofem::Structural3DElement | |
| void | computeBmatrixAt (GaussPoint *gp, FloatMatrix &answer, int lowerIndx=1, int upperIndx=ALL_STRAINS) override |
| void | computeBHmatrixAt (GaussPoint *gp, FloatMatrix &answer) override |
| void | computeGaussPoints () override |
| void | giveEdgeDofMapping (IntArray &answer, int iEdge) const override |
| double | computeEdgeVolumeAround (GaussPoint *gp, int iEdge) override |
| int | computeLoadLEToLRotationMatrix (FloatMatrix &answer, int iEdge, GaussPoint *gp) override |
| int | testElementExtension (ElementExtension ext) override |
| void | computeSurfaceNMatrixAt (FloatMatrix &answer, int iSurf, GaussPoint *gp) |
| void | giveSurfaceDofMapping (IntArray &answer, int) const override |
| double | computeSurfaceVolumeAround (GaussPoint *gp, int) override |
| int | computeLoadLSToLRotationMatrix (FloatMatrix &answer, int, GaussPoint *gp) override |
| Protected Member Functions inherited from oofem::NLStructuralElement | |
| int | checkConsistency () override |
| virtual void | computePointLoadVectorAt (FloatArray &answer, Load *load, TimeStep *tStep, ValueModeType mode, bool global=true) |
| virtual int | computeLoadGToLRotationMtrx (FloatMatrix &answer) |
| void | condense (FloatMatrix *stiff, FloatMatrix *mass, FloatArray *load, IntArray *what) |
| virtual void | setupIRForMassMtrxIntegration (IntegrationRule &iRule) |
| virtual void | computeBodyLoadVectorAt (FloatArray &answer, Load *load, TimeStep *tStep, ValueModeType mode) |
| Protected Member Functions inherited from oofem::HuertaErrorEstimatorInterface | |
| void | setupRefinedElementProblem1D (Element *element, RefinedElement *refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode mode, TimeStep *tStep, int nodes, FloatArray *corner, FloatArray &midNode, int &localNodeId, int &localElemId, int &localBcId, IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode, const char *edgetype) |
| void | setupRefinedElementProblem2D (Element *element, RefinedElement *refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode mode, TimeStep *tStep, int nodes, FloatArray *corner, FloatArray *midSide, FloatArray &midNode, int &localNodeId, int &localElemId, int &localBcId, IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode, const char *quadtype) |
| void | setupRefinedElementProblem3D (Element *element, RefinedElement *refinedElement, int level, int nodeId, IntArray &localNodeIdArray, IntArray &globalNodeIdArray, HuertaErrorEstimatorInterface ::SetupMode mode, TimeStep *tStep, int nodes, FloatArray *corner, FloatArray *midSide, FloatArray *midFace, FloatArray &midNode, int &localNodeId, int &localElemId, int &localBcId, int hexaSideNode[1][3], int hexaFaceNode[1][3], IntArray &controlNode, IntArray &controlDof, HuertaErrorEstimator ::AnalysisMode aMode, const char *hexatype) |
| Protected Attributes inherited from oofem::Structural3DElement | |
| bool | matRotation |
| Protected Attributes inherited from oofem::NLStructuralElement | |
| int | nlGeometry =0 |
| Flag indicating if geometrical nonlinearities apply. | |
| Protected Attributes inherited from oofem::StructuralElement | |
| std::unique_ptr< FloatArray > | initialDisplacements |
| Initial displacement vector, describes the initial nodal displacements when element has been casted. | |
| Protected Attributes inherited from oofem::Element | |
| int | numberOfDofMans |
| Number of dofmanagers. | |
| IntArray | dofManArray |
| Array containing dofmanager numbers. | |
| int | material |
| Number of associated material. | |
| int | crossSection |
| Number of associated cross section. | |
| IntArray | bodyLoadArray |
| IntArray | boundaryLoadArray |
| std::vector< std ::unique_ptr< IntegrationRule > > | integrationRulesArray |
| FloatMatrix | elemLocalCS |
| Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation. | |
| int | activityTimeFunction |
| Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element. | |
| int | globalNumber |
| int | numberOfGaussPoints |
| elementParallelMode | parallel_mode |
| Determines the parallel mode of the element. | |
| IntArray | partitions |
| IntArray | globalEdgeIDs |
| IntArray | globalSurfaceIDs |
| Protected Attributes inherited from oofem::FEMComponent | |
| int | number |
| Component number. | |
| Domain * | domain |
| Link to domain object, useful for communicating with other FEM components. | |
This class implements a linear tetrahedral four-node finite element for stress analysis. Each node has 3 degrees of freedom.
Definition at line 57 of file ltrspace.h.
| oofem::LTRSpace::LTRSpace | ( | int | n, |
| Domain * | d ) |
Definition at line 61 of file ltrspace.C.
References oofem::HuertaErrorEstimatorInterface::HuertaErrorEstimatorInterface(), oofem::NodalAveragingRecoveryModelInterface::NodalAveragingRecoveryModelInterface(), oofem::Element::numberOfDofMans, oofem::Element::numberOfGaussPoints, oofem::SpatialLocalizerInterface::SpatialLocalizerInterface(), oofem::SPRNodalRecoveryModelInterface::SPRNodalRecoveryModelInterface(), oofem::Structural3DElement::Structural3DElement(), oofem::ZZErrorEstimatorInterface::ZZErrorEstimatorInterface(), and oofem::ZZNodalRecoveryModelInterface::ZZNodalRecoveryModelInterface().
|
inlinevirtual |
Definition at line 68 of file ltrspace.h.
|
overridevirtual |
Computes lumped mass matrix of receiver. Default implementation returns lumped consistent mass matrix. Then returns lumped mass transformed into nodal coordinate system. The lumping procedure zeroes all off-diagonal members and zeroes also all diagonal members corresponding to non-displacement DOFs. Such diagonal matrix is then rescaled, to preserve the element mass. Requires the computeNmatrixAt and giveMassMtrxIntegrationgMask services to be implemented.
| answer | Lumped mass matrix. |
| tStep | Time step. |
Reimplemented from oofem::StructuralElement.
Definition at line 103 of file ltrspace.C.
References oofem::FloatMatrix::at(), oofem::Structural3DElement::computeVolumeAround(), oofem::StructuralElement::giveStructuralCrossSection(), oofem::Element::integrationRulesArray, oofem::FloatMatrix::resize(), and oofem::FloatMatrix::zero().
|
overridevirtual |
Reimplemented from oofem::Element.
Definition at line 303 of file ltrspace.C.
References gc, oofem::Element::giveNode(), OOFEG_DEFORMED_GEOMETRY_LAYER, and OOFEG_DEFORMED_GEOMETRY_WIDTH.
|
overridevirtual |
Reimplemented from oofem::Element.
Definition at line 262 of file ltrspace.C.
References oofem::Element_remote, gc, oofem::Element::giveNode(), oofem::Element::giveParallelMode(), OOFEG_RAW_GEOMETRY_LAYER, and OOFEG_RAW_GEOMETRY_WIDTH.
|
overridevirtual |
Reimplemented from oofem::Element.
Definition at line 338 of file ltrspace.C.
References oofem::FloatArray::at(), gc, oofem::Element::giveDefaultIntegrationRulePtr(), oofem::StructuralElement::giveInternalStateAtNode(), oofem::StructuralElement::giveIPValue(), oofem::Element::giveNode(), oofem::Element::integrationRulesArray, oofem::ISM_local, oofem::ISM_recovered, OOFEG_VARPLOT_PATTERN_LAYER, and oofem::SA_ISO_SURF.
|
overridevirtual |
Reimplemented from oofem::Element.
Definition at line 400 of file ltrspace.C.
References oofem::FloatArray::at(), oofem::Structural3DElement::computeVolumeAround(), gc, oofem::StructuralElement::giveIPValue(), oofem::Element::giveNode(), oofem::Element::integrationRulesArray, length(), oofem::Element::numberOfGaussPoints, OOFEG_CRACK_PATTERN_LAYER, OOFEG_CRACK_PATTERN_WIDTH, pscm_CLOSED, pscm_NONE, pscm_OPEN, pscm_SOFTENING, and TR_LENGHT_REDUCT.
|
inlineoverridevirtual |
Reimplemented from oofem::Element.
Definition at line 78 of file ltrspace.h.
|
inlineoverridevirtual |
Returns the element geometry type. This information is assumed to be of general interest, but it is required only for some specialized tasks.
Implements oofem::Element.
Definition at line 79 of file ltrspace.h.
|
inlineoverridevirtual |
Implements oofem::FEMComponent.
Definition at line 77 of file ltrspace.h.
References _IFT_LTRSpace_Name.
|
overridevirtual |
Interface requesting service.
Reimplemented from oofem::FEMComponent.
Definition at line 74 of file ltrspace.C.
References oofem::HuertaErrorEstimatorInterface::HuertaErrorEstimatorInterface(), oofem::HuertaErrorEstimatorInterfaceType, oofem::NodalAveragingRecoveryModelInterface::NodalAveragingRecoveryModelInterface(), oofem::NodalAveragingRecoveryModelInterfaceType, oofem::SpatialLocalizerInterface::SpatialLocalizerInterface(), oofem::SpatialLocalizerInterfaceType, oofem::SPRNodalRecoveryModelInterface::SPRNodalRecoveryModelInterface(), oofem::SPRNodalRecoveryModelInterfaceType, oofem::ZZErrorEstimatorInterface::ZZErrorEstimatorInterface(), oofem::ZZErrorEstimatorInterfaceType, oofem::ZZNodalRecoveryModelInterface::ZZNodalRecoveryModelInterface(), and oofem::ZZNodalRecoveryModelInterfaceType.
|
overridevirtual |
Reimplemented from oofem::Element.
Definition at line 95 of file ltrspace.C.
References interpolation.
|
inlineoverridevirtual |
Return desired number of integration points for consistent mass matrix computation, if required.
TODO this is without the jacobian and density
Reimplemented from oofem::StructuralElement.
Definition at line 73 of file ltrspace.h.
|
inlineoverridevirtual |
Returns the weight representing relative computational cost of receiver The reference element is triangular plane stress element. Its weight is equal to 1.0 The other elements should compare to this reference element.
Reimplemented from oofem::Element.
Definition at line 89 of file ltrspace.h.
|
overridevirtual |
Implements oofem::HuertaErrorEstimatorInterface.
Definition at line 254 of file ltrspace.C.
References oofem::StructuralElement::computeNmatrixAt(), and oofem::GaussPoint::giveSubPatchCoordinates().
|
overridevirtual |
Implements oofem::HuertaErrorEstimatorInterface.
Definition at line 183 of file ltrspace.C.
References oofem::FloatArray::at(), oofem::Element::giveNode(), oofem::FloatArray::resize(), and oofem::HuertaErrorEstimatorInterface::setupRefinedElementProblem3D().
|
overridevirtual |
Computes the element value in given node.
| answer | Contains the result. |
| node | Element node number. |
| type | Determines the type of internal variable to be recovered. |
| tStep | Time step. |
Implements oofem::NodalAveragingRecoveryModelInterface.
Definition at line 124 of file ltrspace.C.
References oofem::FloatArray::clear(), oofem::StructuralElement::giveIPValue(), oofem::Element::integrationRulesArray, and oofem::Element::numberOfGaussPoints.
|
overridevirtual |
Implements oofem::SPRNodalRecoveryModelInterface.
Definition at line 151 of file ltrspace.C.
References oofem::IntArray::at(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), OOFEM_ERROR, and oofem::IntArray::resize().
|
overridevirtual |
Implements oofem::SPRNodalRecoveryModelInterface.
Definition at line 171 of file ltrspace.C.
References oofem::Element::giveDefaultIntegrationRulePtr().
|
overridevirtual |
Implements oofem::SPRNodalRecoveryModelInterface.
Definition at line 176 of file ltrspace.C.
References oofem::SPRPatchType_3dBiLin.
|
overridevirtual |
Implements oofem::SPRNodalRecoveryModelInterface.
Definition at line 140 of file ltrspace.C.
References oofem::IntArray::at(), oofem::Element::giveNode(), and oofem::IntArray::resize().
|
staticprotected |
Definition at line 64 of file ltrspace.h.
Referenced by giveInterpolation().