oofem::LWedge Class Reference

#include <lwedge.h>

Inheritance diagram for oofem::LWedge:

Collaboration diagram for oofem::LWedge:

Public Member Functions
	LWedge (int, Domain *)
virtual	~LWedge ()
FEInterpolation *	giveInterpolation () const override
void	initializeFrom (InputRecord &ir, int priority) override
Interface *	giveInterface (InterfaceType) override
int	testElementExtension (ElementExtension ext) override
int	giveNumberOfIPForMassMtrxIntegration () override
void	SPRNodalRecoveryMI_giveSPRAssemblyPoints (IntArray &pap) override
void	SPRNodalRecoveryMI_giveDofMansDeterminedByPatch (IntArray &answer, int pap) override
int	SPRNodalRecoveryMI_giveNumberOfIP () override
SPRPatchType	SPRNodalRecoveryMI_givePatchType () override
void	NodalAveragingRecoveryMI_computeNodalValue (FloatArray &answer, int node, InternalStateType type, TimeStep *tStep) override
const char *	giveInputRecordName () const override
const char *	giveClassName () const override
Element_Geometry_Type	giveGeometryType () const override
Public Member Functions inherited from oofem::Structural3DElement
	Structural3DElement (int n, Domain *d)
virtual	~Structural3DElement ()
	Destructor.
void	initializeFrom (InputRecord &ir, int priority) override
MaterialMode	giveMaterialMode () override
int	computeNumberOfDofs () override
void	giveDofManDofIDMask (int inode, IntArray &answer) const override
double	computeVolumeAround (GaussPoint *gp) override
double	giveCharacteristicLength (const FloatArray &normalToCrackPlane) override
void	giveMaterialOrientationAt (FloatArray &x, FloatArray &y, FloatArray &z, const FloatArray &lcoords)
void	computeStressVector (FloatArray &answer, const FloatArray &strain, GaussPoint *gp, TimeStep *tStep) override
void	computeConstitutiveMatrixAt (FloatMatrix &answer, MatResponseMode rMode, GaussPoint *gp, TimeStep *tStep) override
void	computeConstitutiveMatrix_dPdF_At (FloatMatrix &answer, MatResponseMode rMode, GaussPoint *gp, TimeStep *tStep) override
void	computeInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep) override
Public Member Functions inherited from oofem::NLStructuralElement
	NLStructuralElement (int n, Domain *d)
virtual	~NLStructuralElement ()
	Destructor.
int	giveGeometryMode ()
void	computeFirstPKStressVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep)
void	computeCauchyStressVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep)
void	computeStiffnessMatrix (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) override
void	computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep)
void	giveInternalForcesVector (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override
void	giveInternalForcesVector_withIRulesAsSubcells (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0) override
virtual void	computeDeformationGradientVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep)
double	computeCurrentVolume (TimeStep *tStep)
void	giveInputRecord (DynamicInputRecord &input) override
const char *	giveClassName () const override
Public Member Functions inherited from oofem::StructuralElement
	StructuralElement (int n, Domain *d)
virtual	~StructuralElement ()
	Destructor.
void	giveCharacteristicMatrix (FloatMatrix &answer, CharType, TimeStep *tStep) override
void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep) override
virtual void	computeMassMatrix (FloatMatrix &answer, TimeStep *tStep)
virtual void	computeLumpedMassMatrix (FloatMatrix &answer, TimeStep *tStep)
virtual void	computeConsistentMassMatrix (FloatMatrix &answer, TimeStep *tStep, double &mass, const double *ipDensity=NULL)
virtual void	giveMassMtrxIntegrationgMask (IntArray &answer)
void	computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep)
virtual void	computeLumpedInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep)
void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer) override
virtual void	computeStrainVector (FloatArray &answer, GaussPoint *gp, TimeStep *tStep)
int	giveIPValue (FloatArray &answer, GaussPoint *gp, InternalStateType type, TimeStep *tStep) override
virtual void	computeResultingIPTemperatureAt (FloatArray &answer, TimeStep *tStep, GaussPoint *gp, ValueModeType mode)
virtual void	computeResultingIPEigenstrainAt (FloatArray &answer, TimeStep *tStep, GaussPoint *gp, ValueModeType mode)
virtual void	computeNmatrixAt (const FloatArray &iLocCoord, FloatMatrix &answer)
void	updateBeforeNonlocalAverage (TimeStep *tStep) override
virtual void	giveNonlocalLocationArray (IntArray &locationArray, const UnknownNumberingScheme &us)
virtual void	addNonlocalStiffnessContributions (SparseMtrx &dest, const UnknownNumberingScheme &s, TimeStep *tStep)
int	adaptiveUpdate (TimeStep *tStep) override
void	updateInternalState (TimeStep *tStep) override
void	updateYourself (TimeStep *tStep) override
int	checkConsistency () override
void	giveInputRecord (DynamicInputRecord &input) override
const char *	giveClassName () const override
int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep) override
void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override
	Shows sparse structure.
void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness).
void	computeLoadVector (FloatArray &answer, BodyLoad *load, CharType type, ValueModeType mode, TimeStep *tStep) override
void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad *load, int boundary, CharType type, ValueModeType mode, TimeStep *tStep, bool global=true) override
void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad *load, int boundary, CharType type, ValueModeType mode, TimeStep *tStep, bool global=true) override
virtual void	computeEdgeNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords)
	computes edge interpolation matrix
virtual void	computeSurfaceNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords)
StructuralCrossSection *	giveStructuralCrossSection ()
	Helper function which returns the structural cross-section for the element.
virtual void	createMaterialStatus ()
Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Element (const Element &src)=delete
Element &	operator= (const Element &src)=delete
virtual	~Element ()
	Virtual destructor.
void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual int	giveNumberOfDofs ()
virtual int	giveNumberOfInternalDofManagers () const
virtual DofManager *	giveInternalDofManager (int i) const
virtual void	setInternalDofManager (int num, std::unique_ptr< DofManager > dm)
virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, BoundaryLoad *load, int boundary, MatResponseMode rmode, TimeStep *tStep)
virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, BoundaryLoad *load, int boundary, MatResponseMode rmode, TimeStep *tStep)
const IntArray &	giveBodyLoadList () const
const IntArray &	giveBoundaryLoadList () const
void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
virtual int	computeNumberOfGlobalDofs ()
int	computeNumberOfPrimaryMasterDofs ()
virtual bool	computeGtoLRotationMatrix (FloatMatrix &answer)
virtual bool	giveRotationMatrix (FloatMatrix &answer)
virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
virtual void	giveElementDofIDMask (IntArray &answer) const
virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension.
double	computeMeanSize ()
virtual double	computeVolume ()
virtual double	computeArea ()
virtual double	computeLength ()
virtual IntArray	giveBoundaryEdgeNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundarySurfaceNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundaryNodes (int boundary) const
virtual std::unique_ptr< IntegrationRule >	giveBoundaryEdgeIntegrationRule (int order, int boundary)
virtual std::unique_ptr< IntegrationRule >	giveBoundarySurfaceIntegrationRule (int order, int boundary)
int	giveDofManagerNumber (int i) const
const IntArray &	giveDofManArray () const
void	addDofManager (DofManager *dMan)
DofManager *	giveDofManager (int i) const
Node *	giveNode (int i) const
virtual ElementSide *	giveSide (int i) const
virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
virtual const FEInterpolation *	getGeometryInterpolation () const
virtual Material *	giveMaterial ()
int	giveMaterialNumber () const
CrossSection *	giveCrossSection ()
int	getActivityTimeFunctionNumber ()
void	setActivityTimeFunctionNumber (int funcIndx)
void	setMaterial (int matIndx)
virtual void	setCrossSection (int csIndx)
virtual int	giveNumberOfDofManagers () const
void	setNumberOfDofManagers (int i)
	Sets number of element dof managers.
virtual int	giveNumberOfNodes () const
void	setDofManagers (const IntArray &dmans)
void	setDofManager (int id, int dm)
void	setBodyLoads (const IntArray &bodyLoads)
void	setIntegrationRules (std ::vector< std ::unique_ptr< IntegrationRule > > irlist)
virtual integrationDomain	giveIntegrationDomain () const
virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
int	giveRegionNumber ()
virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
virtual bool	isActivated (TimeStep *tStep)
virtual bool	isCast (TimeStep *tStep)
virtual void	initForNewStep ()
virtual Element_Geometry_Type	giveEdgeGeometryType (int id) const
	Returns the receiver edge geometry type.
virtual Element_Geometry_Type	giveSurfaceGeometryType (int id) const
	Returns the receiver surface geometry type.
virtual int	giveSpatialDimension ()
virtual int	giveNumberOfBoundarySides ()
	Returns number of boundaries (entities of element_dimension-1: points, edges, surfaces).
virtual int	giveNumberOfEdges () const
virtual int	giveNumberOfSurfaces () const
virtual int	giveDefaultIntegrationRule () const
virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
int	giveNumberOfIntegrationRules ()
virtual IntegrationRule *	giveIntegrationRule (int i)
std::vector< std ::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()
int	giveGlobalIPValue (FloatArray &answer, GaussPoint *gp, InternalStateType type, TimeStep *tStep)
virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method)
virtual double	giveParentElSize () const
virtual int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords)
virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
virtual int	giveLocalCoordinateSystem (FloatMatrix &answer)
virtual void	giveLocalCoordinateSystemVector (InternalStateType isttype, FloatArray &answer)
virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
virtual int	adaptiveMap (Domain *oldd, TimeStep *tStep)
virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
virtual int	adaptiveFinish (TimeStep *tStep)
void	updateLocalNumbering (EntityRenumberingFunctor &f) override
template<class T>
void	ipEvaluator (T *src, void(T ::*f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f.
template<class T, class S>
void	ipEvaluator (T *src, void(T ::*f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array.
virtual void	drawYourself (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType)
virtual void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)
virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
int	giveLabel () const
int	giveGlobalNumber () const
void	setGlobalNumber (int num)
elementParallelMode	giveParallelMode () const
void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element.
virtual elementParallelMode	giveKnotSpanParallelMode (int) const
int	packUnknowns (DataStream &buff, TimeStep *tStep)
int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
int	estimatePackSize (DataStream &buff)
const IntArray *	givePartitionList () const
void	setPartitionList (IntArray &pl)
virtual double	predictRelativeComputationalCost ()
virtual double	giveRelativeSelfComputationalCost ()
virtual double	predictRelativeRedistributionCost ()
IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element.
IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element.
void	initializeFinish () override
void	postInitialize () override
	Performs post initialization steps.
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
void	printOutputAt (FILE *file, TimeStep *tStep) override
virtual const IntArray	giveLocation ()
virtual void	recalculateCoordinates (int nodeNumber, FloatArray &coords)
void	setSharedEdgeID (int iedge, int globalID)
void	setSharedSurfaceID (int isurf, int globalID)
const IntArray *	giveSharedEdgeIDs () const
const IntArray *	giveSharedSurfaceIDs () const
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	initializeFrom (InputRecord &ir)
virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging.
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).
Public Member Functions inherited from oofem::SPRNodalRecoveryModelInterface
	SPRNodalRecoveryModelInterface ()
	Constructor.
Public Member Functions inherited from oofem::Interface
	Interface ()
	Constructor.
virtual	~Interface ()
Public Member Functions inherited from oofem::ZZNodalRecoveryModelInterface
	ZZNodalRecoveryModelInterface (Element *element)
	Constructor.
virtual bool	ZZNodalRecoveryMI_computeNValProduct (FloatMatrix &answer, InternalStateType type, TimeStep *tStep)
virtual void	ZZNodalRecoveryMI_computeNNMatrix (FloatArray &answer, InternalStateType type)
Public Member Functions inherited from oofem::NodalAveragingRecoveryModelInterface
	NodalAveragingRecoveryModelInterface ()
	Constructor.
Public Member Functions inherited from oofem::SpatialLocalizerInterface
	SpatialLocalizerInterface (Element *element)
virtual int	SpatialLocalizerI_containsPoint (const FloatArray &coords)
int	SpatialLocalizerI_BBoxContainsPoint (const FloatArray &coords)
virtual void	SpatialLocalizerI_giveBBox (FloatArray &bb0, FloatArray &bb1)
virtual double	SpatialLocalizerI_giveClosestPoint (FloatArray &lcoords, FloatArray &closest, const FloatArray &gcoords)

Static Protected Attributes
static FEI3dWedgeLin	interpolation
Static Protected Attributes inherited from oofem::Structural3DElement
static ParamKey	IPK_Structural3DElement_materialCoordinateSystem
	[optional] Material coordinate system (local) for the element.
Static Protected Attributes inherited from oofem::NLStructuralElement
static ParamKey	IPK_NLStructuralElement_nlgeoflag

Additional Inherited Members
Static Public Attributes inherited from oofem::Element
static ParamKey	IPK_Element_mat
static ParamKey	IPK_Element_crosssect
static ParamKey	IPK_Element_nodes
static ParamKey	IPK_Element_bodyload
static ParamKey	IPK_Element_boundaryload
static ParamKey	IPK_Element_lcs
static ParamKey	IPK_Element_partitions
static ParamKey	IPK_Element_remote
static ParamKey	IPK_Element_activityTimeFunction
static ParamKey	IPK_Element_nip
Protected Member Functions inherited from oofem::Structural3DElement
void	computeBmatrixAt (GaussPoint *gp, FloatMatrix &answer, int lowerIndx=1, int upperIndx=ALL_STRAINS) override
void	computeBHmatrixAt (GaussPoint *gp, FloatMatrix &answer) override
void	computeGaussPoints () override
void	giveEdgeDofMapping (IntArray &answer, int iEdge) const override
double	computeEdgeVolumeAround (GaussPoint *gp, int iEdge) override
int	computeLoadLEToLRotationMatrix (FloatMatrix &answer, int iEdge, GaussPoint *gp) override
int	testElementExtension (ElementExtension ext) override
void	computeSurfaceNMatrixAt (FloatMatrix &answer, int iSurf, GaussPoint *gp)
void	giveSurfaceDofMapping (IntArray &answer, int) const override
double	computeSurfaceVolumeAround (GaussPoint *gp, int) override
int	computeLoadLSToLRotationMatrix (FloatMatrix &answer, int, GaussPoint *gp) override
Protected Member Functions inherited from oofem::NLStructuralElement
int	checkConsistency () override
virtual void	computePointLoadVectorAt (FloatArray &answer, Load *load, TimeStep *tStep, ValueModeType mode, bool global=true)
virtual int	computeLoadGToLRotationMtrx (FloatMatrix &answer)
void	condense (FloatMatrix *stiff, FloatMatrix *mass, FloatArray *load, IntArray *what)
virtual void	setupIRForMassMtrxIntegration (IntegrationRule &iRule)
virtual void	computeBodyLoadVectorAt (FloatArray &answer, Load *load, TimeStep *tStep, ValueModeType mode)
Protected Attributes inherited from oofem::Structural3DElement
bool	matRotation
Protected Attributes inherited from oofem::NLStructuralElement
int	nlGeometry =0
	Flag indicating if geometrical nonlinearities apply.
Protected Attributes inherited from oofem::StructuralElement
std::unique_ptr< FloatArray >	initialDisplacements
	Initial displacement vector, describes the initial nodal displacements when element has been casted.
Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers.
IntArray	dofManArray
	Array containing dofmanager numbers.
int	material
	Number of associated material.
int	crossSection
	Number of associated cross section.
IntArray	bodyLoadArray
IntArray	boundaryLoadArray
std::vector< std ::unique_ptr< IntegrationRule > >	integrationRulesArray
FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation.
int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element.
int	globalNumber
int	numberOfGaussPoints
elementParallelMode	parallel_mode
	Determines the parallel mode of the element.
IntArray	partitions
IntArray	globalEdgeIDs
IntArray	globalSurfaceIDs
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.

Detailed Description

This class implements a Linear 3d 6 - node elasticity finite element.

Definition at line 54 of file lwedge.h.

Constructor & Destructor Documentation

LWedge()

oofem::LWedge::LWedge	(	int	n,
		Domain *	aDomain )

Definition at line 58 of file lwedge.C.

References oofem::Element::numberOfDofMans, oofem::SpatialLocalizerInterface::SpatialLocalizerInterface(), oofem::Structural3DElement::Structural3DElement(), and oofem::ZZNodalRecoveryModelInterface::ZZNodalRecoveryModelInterface().

~LWedge()

virtual oofem::LWedge::~LWedge ( )

inlinevirtual

Definition at line 61 of file lwedge.h.

Member Function Documentation

giveClassName()

const char * oofem::LWedge::giveClassName ( ) const

inlineoverridevirtual

Returns

Class name of the receiver.

Reimplemented from oofem::Element.

Definition at line 80 of file lwedge.h.

giveGeometryType()

Element_Geometry_Type oofem::LWedge::giveGeometryType ( ) const

inlineoverridevirtual

Returns the element geometry type. This information is assumed to be of general interest, but it is required only for some specialized tasks.

Returns

Geometry type of element.

Implements oofem::Element.

Definition at line 81 of file lwedge.h.

giveInputRecordName()

const char * oofem::LWedge::giveInputRecordName ( ) const

inlineoverridevirtual

Returns

Input record name of the receiver.

Implements oofem::FEMComponent.

Definition at line 79 of file lwedge.h.

References _IFT_LWedge_Name.

giveInterface()

Interface * oofem::LWedge::giveInterface ( InterfaceType t )

overridevirtual

Interface requesting service.

See also

InterfaceType

Returns

Requested interface if implemented, otherwise NULL.

Reimplemented from oofem::FEMComponent.

Definition at line 75 of file lwedge.C.

References oofem::NodalAveragingRecoveryModelInterface::NodalAveragingRecoveryModelInterface(), oofem::NodalAveragingRecoveryModelInterfaceType, OOFEM_LOG_INFO, oofem::SpatialLocalizerInterface::SpatialLocalizerInterface(), oofem::SpatialLocalizerInterfaceType, oofem::SPRNodalRecoveryModelInterface::SPRNodalRecoveryModelInterface(), oofem::SPRNodalRecoveryModelInterfaceType, oofem::ZZNodalRecoveryModelInterface::ZZNodalRecoveryModelInterface(), and oofem::ZZNodalRecoveryModelInterfaceType.

giveInterpolation()

FEInterpolation * oofem::LWedge::giveInterpolation ( ) const

overridevirtual

Returns

Interpolation of the element geometry, or NULL if none exist.

Reimplemented from oofem::Element.

Definition at line 71 of file lwedge.C.

References interpolation.

giveNumberOfIPForMassMtrxIntegration()

int oofem::LWedge::giveNumberOfIPForMassMtrxIntegration ( )

inlineoverridevirtual

Return desired number of integration points for consistent mass matrix computation, if required.

Returns

Number of integration points for mass matrix.

TODO this is without the jacobian and density

Reimplemented from oofem::StructuralElement.

Definition at line 69 of file lwedge.h.

initializeFrom()

void oofem::LWedge::initializeFrom ( InputRecord & ir, int priority )

overridevirtual

Reimplemented from oofem::Element.

Definition at line 65 of file lwedge.C.

NodalAveragingRecoveryMI_computeNodalValue()

void oofem::LWedge::NodalAveragingRecoveryMI_computeNodalValue ( FloatArray & answer, int node, InternalStateType type, TimeStep * tStep )

overridevirtual

Computes the element value in given node.

Parameters

answer	Contains the result.
node	Element node number.
type	Determines the type of internal variable to be recovered.
tStep	Time step.

Implements oofem::NodalAveragingRecoveryModelInterface.

Definition at line 134 of file lwedge.C.

References oofem::FloatArray::clear(), and OOFEM_WARNING.

SPRNodalRecoveryMI_giveDofMansDeterminedByPatch()

void oofem::LWedge::SPRNodalRecoveryMI_giveDofMansDeterminedByPatch ( IntArray & answer, int pap )

overridevirtual

Implements oofem::SPRNodalRecoveryModelInterface.

Definition at line 101 of file lwedge.C.

References oofem::IntArray::at(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), OOFEM_ERROR, and oofem::IntArray::resize().

SPRNodalRecoveryMI_giveNumberOfIP()

int oofem::LWedge::SPRNodalRecoveryMI_giveNumberOfIP ( )

overridevirtual

Implements oofem::SPRNodalRecoveryModelInterface.

Definition at line 120 of file lwedge.C.

References oofem::Element::numberOfGaussPoints.

SPRNodalRecoveryMI_givePatchType()

SPRPatchType oofem::LWedge::SPRNodalRecoveryMI_givePatchType ( )

overridevirtual

Implements oofem::SPRNodalRecoveryModelInterface.

Definition at line 127 of file lwedge.C.

References oofem::SPRPatchType_3dBiLin.

SPRNodalRecoveryMI_giveSPRAssemblyPoints()

void oofem::LWedge::SPRNodalRecoveryMI_giveSPRAssemblyPoints ( IntArray & pap )

overridevirtual

Implements oofem::SPRNodalRecoveryModelInterface.

Definition at line 92 of file lwedge.C.

References oofem::IntArray::at(), oofem::Element::giveNode(), and oofem::IntArray::resize().

testElementExtension()

int oofem::LWedge::testElementExtension ( ElementExtension ext )

inlineoverridevirtual

Tests if the element implements required extension. ElementExtension type defines the list of all available element extensions.

Parameters

ext	Extension to be tested.

Returns

Nonzero if extension supported.

See also

ElementExtension

Reimplemented from oofem::Element.

Definition at line 68 of file lwedge.h.

References oofem::Element_SurfaceLoadSupport.

Member Data Documentation

interpolation

FEI3dWedgeLin oofem::LWedge::interpolation

staticprotected

Definition at line 57 of file lwedge.h.

Referenced by giveInterpolation().

---

The documentation for this class was generated from the following files:

• lwedge.h
• lwedge.C