#include <lattice3d.h>

Inheritance diagram for oofem::Lattice3d:

Collaboration diagram for oofem::Lattice3d:

Public Member Functions
	Lattice3d (int n, Domain *)
virtual	~Lattice3d ()
int	giveLocalCoordinateSystem (FloatMatrix &answer) override
int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords) override
double	giveLength () override
double	giveNormalStress () override
double	giveArea () override
int	computeNumberOfDofs () override
void	giveDofManDofIDMask (int inode, IntArray &) const override
double	computeVolumeAround (GaussPoint *) override
int	giveNumberOfCrossSectionNodes () override
int	giveCrackFlag () override
double	giveCrackWidth () override
void	givePlasticStrain (FloatArray &plas) override
void	giveOldPlasticStrain (FloatArray &plas) override
void	givePressures (FloatArray &pres) override
int	giveCouplingFlag () override
void	giveCouplingNumbers (IntArray &numbers) override
void	giveCrossSectionCoordinates (FloatArray &coords) override
virtual void	giveGPCoordinates (FloatArray &coords)
virtual void	computeGeometryProperties ()
virtual void	computeCrossSectionProperties ()
const char *	giveInputRecordName () const override
const char *	giveClassName () const override
void	initializeFrom (InputRecord &ir, int priority) override
void	postInitialize () override
	Performs post initialization steps.
Element_Geometry_Type	giveGeometryType () const override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
void	drawYourself (oofegGraphicContext &context, TimeStep *tStep) override
void	drawRawGeometry (oofegGraphicContext &, TimeStep *tStep) override
void	drawRawCrossSections (oofegGraphicContext &, TimeStep *tStep)
void	drawDeformedGeometry (oofegGraphicContext &, TimeStep *tStep, UnknownType) override
Public Member Functions inherited from oofem::LatticeStructuralElement
	LatticeStructuralElement (int n, Domain *d)
void	printOutputAt (FILE file, TimeStep tStep) override
virtual double	giveBondLength ()
virtual double	giveBondEndLength ()
virtual double	giveBondDiameter ()
virtual double	giveOldCrackWidth ()
virtual double	giveDissipation ()
void	computeNmatrixAt (const FloatArray &iLocCoord, FloatMatrix &answer) override
virtual double	giveDeltaDissipation ()
virtual double	giveOldNormalStress ()
virtual int	hasBeenUpdated ()
virtual void	giveGpCoordinates (FloatArray &coords)
Public Member Functions inherited from oofem::StructuralElement
	StructuralElement (int n, Domain *d)
virtual	~StructuralElement ()
	Destructor.
void	giveCharacteristicMatrix (FloatMatrix &answer, CharType, TimeStep *tStep) override
void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep) override
virtual void	computeConsistentMassMatrix (FloatMatrix &answer, TimeStep tStep, double &mass, const double ipDensity=NULL)
virtual void	giveMassMtrxIntegrationgMask (IntArray &answer)
void	computeStiffnessMatrix_withIRulesAsSubcells (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep)
virtual void	computeInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep)
virtual void	computeLumpedInitialStressMatrix (FloatMatrix &answer, TimeStep *tStep)
void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer) override
virtual void	giveInternalForcesVector (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0)
virtual void	giveInternalForcesVector_withIRulesAsSubcells (FloatArray &answer, TimeStep *tStep, int useUpdatedGpRecord=0)
virtual void	computeStrainVector (FloatArray &answer, GaussPoint gp, TimeStep tStep)
int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep) override
virtual void	computeResultingIPTemperatureAt (FloatArray &answer, TimeStep tStep, GaussPoint gp, ValueModeType mode)
virtual void	computeResultingIPEigenstrainAt (FloatArray &answer, TimeStep tStep, GaussPoint gp, ValueModeType mode)
void	updateBeforeNonlocalAverage (TimeStep *tStep) override
virtual void	giveNonlocalLocationArray (IntArray &locationArray, const UnknownNumberingScheme &us)
virtual void	addNonlocalStiffnessContributions (SparseMtrx &dest, const UnknownNumberingScheme &s, TimeStep *tStep)
int	adaptiveUpdate (TimeStep *tStep) override
void	updateInternalState (TimeStep *tStep) override
void	updateYourself (TimeStep *tStep) override
int	checkConsistency () override
void	giveInputRecord (DynamicInputRecord &input) override
const char *	giveClassName () const override
int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep) override
void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override
	Shows sparse structure.
void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep) override
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness).
void	computeLoadVector (FloatArray &answer, BodyLoad load, CharType type, ValueModeType mode, TimeStep tStep) override
void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true) override
void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true) override
virtual void	computeEdgeNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords)
	computes edge interpolation matrix
virtual void	computeSurfaceNMatrix (FloatMatrix &answer, int boundaryID, const FloatArray &lcoords)
StructuralCrossSection *	giveStructuralCrossSection ()
	Helper function which returns the structural cross-section for the element.
virtual void	createMaterialStatus ()
Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Element (const Element &src)=delete
Element &	operator= (const Element &src)=delete
virtual	~Element ()
	Virtual destructor.
void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
virtual int	giveNumberOfDofs ()
virtual int	giveNumberOfInternalDofManagers () const
virtual DofManager *	giveInternalDofManager (int i) const
virtual void	setInternalDofManager (int num, std::unique_ptr< DofManager > dm)
virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, BoundaryLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
const IntArray &	giveBodyLoadList () const
const IntArray &	giveBoundaryLoadList () const
void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
virtual int	computeNumberOfGlobalDofs ()
int	computeNumberOfPrimaryMasterDofs ()
virtual bool	giveRotationMatrix (FloatMatrix &answer)
virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
virtual void	giveElementDofIDMask (IntArray &answer) const
virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension.
double	computeMeanSize ()
virtual double	computeVolume ()
virtual double	computeArea ()
virtual double	computeLength ()
virtual IntArray	giveBoundaryEdgeNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundarySurfaceNodes (int boundary, bool includeHierarchical=false) const
virtual IntArray	giveBoundaryNodes (int boundary) const
virtual std::unique_ptr< IntegrationRule >	giveBoundaryEdgeIntegrationRule (int order, int boundary)
virtual std::unique_ptr< IntegrationRule >	giveBoundarySurfaceIntegrationRule (int order, int boundary)
int	giveDofManagerNumber (int i) const
const IntArray &	giveDofManArray () const
void	addDofManager (DofManager *dMan)
DofManager *	giveDofManager (int i) const
Node *	giveNode (int i) const
virtual ElementSide *	giveSide (int i) const
virtual FEInterpolation *	giveInterpolation () const
virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
virtual const FEInterpolation *	getGeometryInterpolation () const
virtual Material *	giveMaterial ()
int	giveMaterialNumber () const
CrossSection *	giveCrossSection ()
int	getActivityTimeFunctionNumber ()
void	setActivityTimeFunctionNumber (int funcIndx)
void	setMaterial (int matIndx)
virtual void	setCrossSection (int csIndx)
virtual int	giveNumberOfDofManagers () const
void	setNumberOfDofManagers (int i)
	Sets number of element dof managers.
virtual int	giveNumberOfNodes () const
void	setDofManagers (const IntArray &dmans)
void	setDofManager (int id, int dm)
void	setBodyLoads (const IntArray &bodyLoads)
void	setIntegrationRules (std ::vector< std ::unique_ptr< IntegrationRule > > irlist)
virtual MaterialMode	giveMaterialMode ()
virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
int	giveRegionNumber ()
virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
virtual bool	isActivated (TimeStep *tStep)
virtual bool	isCast (TimeStep *tStep)
virtual void	initForNewStep ()
virtual Element_Geometry_Type	giveEdgeGeometryType (int id) const
	Returns the receiver edge geometry type.
virtual Element_Geometry_Type	giveSurfaceGeometryType (int id) const
	Returns the receiver surface geometry type.
virtual int	giveSpatialDimension ()
virtual int	giveNumberOfBoundarySides ()
	Returns number of boundaries (entities of element_dimension-1: points, edges, surfaces).
virtual int	giveNumberOfEdges () const
virtual int	giveNumberOfSurfaces () const
virtual int	giveDefaultIntegrationRule () const
virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
int	giveNumberOfIntegrationRules ()
virtual IntegrationRule *	giveIntegrationRule (int i)
std::vector< std ::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()
virtual int	testElementExtension (ElementExtension ext)
int	giveGlobalIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicLength (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
virtual double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method)
virtual double	giveParentElSize () const
virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
virtual void	giveLocalCoordinateSystemVector (InternalStateType isttype, FloatArray &answer)
virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
virtual int	adaptiveMap (Domain oldd, TimeStep tStep)
virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
virtual int	adaptiveFinish (TimeStep *tStep)
void	updateLocalNumbering (EntityRenumberingFunctor &f) override
template<class T>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f.
template<class T, class S>
void	ipEvaluator (T src, void(T ::f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array.
virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep)
virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)
virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
int	giveLabel () const
int	giveGlobalNumber () const
void	setGlobalNumber (int num)
elementParallelMode	giveParallelMode () const
void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element.
virtual elementParallelMode	giveKnotSpanParallelMode (int) const
int	packUnknowns (DataStream &buff, TimeStep *tStep)
int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
int	estimatePackSize (DataStream &buff)
const IntArray *	givePartitionList () const
void	setPartitionList (IntArray &pl)
virtual double	predictRelativeComputationalCost ()
virtual double	giveRelativeSelfComputationalCost ()
virtual double	predictRelativeRedistributionCost ()
IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element.
IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element.
void	initializeFinish () override
virtual const IntArray	giveLocation ()
virtual void	recalculateCoordinates (int nodeNumber, FloatArray &coords)
void	setSharedEdgeID (int iedge, int globalID)
void	setSharedSurfaceID (int isurf, int globalID)
const IntArray *	giveSharedEdgeIDs () const
const IntArray *	giveSharedSurfaceIDs () const
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	initializeFrom (InputRecord &ir)
virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging.
virtual Interface *	giveInterface (InterfaceType t)
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).

Protected Member Functions
void	computeBmatrixAt (GaussPoint *, FloatMatrix &, int=1, int=ALL_STRAINS) override
bool	computeGtoLRotationMatrix (FloatMatrix &) override
void	computeLumpedMassMatrix (FloatMatrix &answer, TimeStep *tStep) override
void	computeMassMatrix (FloatMatrix &answer, TimeStep *tStep) override
void	computeStiffnessMatrix (FloatMatrix &answer, MatResponseMode rMode, TimeStep *tStep) override
void	computeConstitutiveMatrixAt (FloatMatrix &answer, MatResponseMode rMode, GaussPoint gp, TimeStep tStep) override
void	computeStressVector (FloatArray &answer, const FloatArray &strain, GaussPoint gp, TimeStep tStep) override
void	computePropertiesOfCrossSection ()
void	computeGaussPoints () override
integrationDomain	giveIntegrationDomain () const override
virtual void	computePointLoadVectorAt (FloatArray &answer, Load load, TimeStep tStep, ValueModeType mode, bool global=true)
virtual void	giveEdgeDofMapping (IntArray &answer, int iEdge) const
virtual void	giveSurfaceDofMapping (IntArray &answer, int iSurf) const
virtual double	computeEdgeVolumeAround (GaussPoint *gp, int iEdge)
virtual double	computeSurfaceVolumeAround (GaussPoint *gp, int iSurf)
virtual int	computeLoadGToLRotationMtrx (FloatMatrix &answer)
virtual int	computeLoadLEToLRotationMatrix (FloatMatrix &answer, int iEdge, GaussPoint *gp)
virtual int	computeLoadLSToLRotationMatrix (FloatMatrix &answer, int iSurf, GaussPoint *gp)
virtual int	giveNumberOfIPForMassMtrxIntegration ()
void	condense (FloatMatrix stiff, FloatMatrix mass, FloatArray load, IntArray what)
virtual void	setupIRForMassMtrxIntegration (IntegrationRule &iRule)
virtual void	computeBodyLoadVectorAt (FloatArray &answer, Load load, TimeStep tStep, ValueModeType mode)

Protected Attributes
double	minLength
double	kappa
double	length
double	I1
double	I2
double	Ip
FloatArray	polygonCoords
int	numberOfPolygonVertices
FloatMatrix	localCoordinateSystem
double	eccS
double	eccT
double	area
FloatArray	midPoint
FloatArray	centroid
FloatArray	globalCentroid
FloatArray	normal
int	geometryFlag
int	couplingFlag
IntArray	couplingNumbers
FloatArray	pressures
Protected Attributes inherited from oofem::StructuralElement
std::unique_ptr< FloatArray >	initialDisplacements
	Initial displacement vector, describes the initial nodal displacements when element has been casted.
Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers.
IntArray	dofManArray
	Array containing dofmanager numbers.
int	material
	Number of associated material.
int	crossSection
	Number of associated cross section.
IntArray	bodyLoadArray
IntArray	boundaryLoadArray
std::vector< std ::unique_ptr< IntegrationRule > >	integrationRulesArray
FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation.
int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element.
int	globalNumber
int	numberOfGaussPoints
elementParallelMode	parallel_mode
	Determines the parallel mode of the element.
IntArray	partitions
IntArray	globalEdgeIDs
IntArray	globalSurfaceIDs
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.

Static Protected Attributes
static ParamKey	IPK_Lattice3d_polycoords
static ParamKey	IPK_Lattice3d_couplingflag
static ParamKey	IPK_Lattice3d_couplingnumber
static ParamKey	IPK_Lattice3d_pressures
static ParamKey	IPK_Lattice3d_mlength

Additional Inherited Members
Static Public Attributes inherited from oofem::Element
static ParamKey	IPK_Element_mat
static ParamKey	IPK_Element_crosssect
static ParamKey	IPK_Element_nodes
static ParamKey	IPK_Element_bodyload
static ParamKey	IPK_Element_boundaryload
static ParamKey	IPK_Element_lcs
static ParamKey	IPK_Element_partitions
static ParamKey	IPK_Element_remote
static ParamKey	IPK_Element_activityTimeFunction
static ParamKey	IPK_Element_nip

Detailed Description

This class implements a 3-dimensional lattice element

Definition at line 56 of file lattice3d.h.

Constructor & Destructor Documentation

◆ Lattice3d()

oofem::Lattice3d::Lattice3d	(	int	n,
		Domain *	aDomain )

Definition at line 70 of file lattice3d.C.

References couplingFlag, eccS, eccT, geometryFlag, oofem::LatticeStructuralElement::LatticeStructuralElement(), minLength, and oofem::Element::numberOfDofMans.

Referenced by oofem::Lattice3dBoundary::Lattice3dBoundary().

◆ ~Lattice3d()

oofem::Lattice3d::~Lattice3d ( )

virtual

Definition at line 81 of file lattice3d.C.

Member Function Documentation

◆ computeBmatrixAt()

void oofem::Lattice3d::computeBmatrixAt	(	GaussPoint *	gp,
		FloatMatrix &	answer,
		int	lowerIndx = 1,
		int	upperIndx = ALL_STRAINS )

overrideprotectedvirtual

Computes the geometrical matrix of receiver in given integration point. The product of this matrix (assembled at given integration point) and element displacement vector is element strain vector. If lowerIndx and upperIndx parameters are specified, answer is formed only for strains within this interval. This will affects the size of answer.

Parameters

gp	Integration point for which answer is computed.
answer	Geometric matrix of receiver.
lowerIndx	If specified, answer is formed only for strain with index equal and greater than lowerIndx. This parameter has default value 1 (answer is formed from first strain).
upperIndx	If specified, answer is formed only for strain with index less and equal than upperIndx. This parameter has default value ALL_STRAINS (answer is formed for all strains).

Implements oofem::StructuralElement.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 86 of file lattice3d.C.

References area, oofem::FloatMatrix::at(), computeGeometryProperties(), eccS, eccT, geometryFlag, I1, I2, Ip, length, oofem::FloatMatrix::resize(), oofem::FloatMatrix::times(), and oofem::FloatMatrix::zero().

Referenced by computeStiffnessMatrix().

◆ computeConstitutiveMatrixAt()

void oofem::Lattice3d::computeConstitutiveMatrixAt	(	FloatMatrix &	answer,
		MatResponseMode	rMode,
		GaussPoint *	gp,
		TimeStep *	tStep )

overrideprotectedvirtual

Computes constitutive matrix of receiver. Default implementation uses element cross section giveCharMaterialStiffnessMatrix service.

Parameters

answer	Constitutive matrix.
rMode	Material response mode of answer.
gp	Integration point for which constitutive matrix is computed.
tStep	Time step.

Implements oofem::StructuralElement.

Definition at line 262 of file lattice3d.C.

References oofem::Element::giveCrossSection().

Referenced by computeStiffnessMatrix(), oofem::Lattice3dBoundary::computeStiffnessMatrix(), and oofem::Lattice3dBoundaryTruss::computeStiffnessMatrix().

◆ computeCrossSectionProperties()

void oofem::Lattice3d::computeCrossSectionProperties ( )

virtual

◆ computeGaussPoints()

void oofem::Lattice3d::computeGaussPoints ( )

overrideprotectedvirtual

Initializes the array of integration rules member variable. Element can have multiple integration rules for different tasks. For example structural element family class uses this feature to implement transparent support for reduced and selective integration of some strain components. Must be defined by terminator classes.

See also: IntegrationRule

Reimplemented from oofem::Element.

Definition at line 298 of file lattice3d.C.

References oofem::Element::integrationRulesArray.

◆ computeGeometryProperties()

void oofem::Lattice3d::computeGeometryProperties ( )

virtual

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 418 of file lattice3d.C.

References oofem::FloatArray::at(), computeCrossSectionProperties(), geometryFlag, oofem::DofManager::giveCoordinate(), oofem::Element::giveNode(), length, midPoint, and normal.

Referenced by computeBmatrixAt(), computeGlobalCoordinates(), computeVolumeAround(), giveArea(), giveGPCoordinates(), giveLength(), and giveLocalCoordinateSystem().

◆ computeGlobalCoordinates()

int oofem::Lattice3d::computeGlobalCoordinates	(	FloatArray &	answer,
		const FloatArray &	lcoords )

overridevirtual

Computes the global coordinates from given element's local coordinates.

Parameters

answer	Requested global coordinates.
lcoords	Local coordinates.

Returns: Nonzero if successful, zero otherwise.

Reimplemented from oofem::Element.

Definition at line 404 of file lattice3d.C.

References computeGeometryProperties(), geometryFlag, globalCentroid, and oofem::FloatArray::resize().

◆ computeGtoLRotationMatrix()

bool oofem::Lattice3d::computeGtoLRotationMatrix ( FloatMatrix & answer )

overrideprotectedvirtual

Returns transformation matrix from global c.s. to local element c.s., i.e. \( r_l =T r_g \). If no transformation is necessary then answer is empty matrix and zero value is returned.

Parameters

answer Computed rotation matrix.

Returns: Nonzero if transformation is necessary, zero otherwise.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 318 of file lattice3d.C.

References oofem::FloatMatrix::at(), giveLocalCoordinateSystem(), oofem::FloatMatrix::resize(), and oofem::FloatMatrix::zero().

◆ computeLumpedMassMatrix()

void oofem::Lattice3d::computeLumpedMassMatrix	(	FloatMatrix &	answer,
		TimeStep *	tStep )

overrideprotectedvirtual

Computes lumped mass matrix of receiver. Default implementation returns lumped consistent mass matrix. Then returns lumped mass transformed into nodal coordinate system. The lumping procedure zeroes all off-diagonal members and zeroes also all diagonal members corresponding to non-displacement DOFs. Such diagonal matrix is then rescaled, to preserve the element mass. Requires the computeNmatrixAt and giveMassMtrxIntegrationgMask services to be implemented.

Parameters

answer	Lumped mass matrix.
tStep	Time step.

Reimplemented from oofem::StructuralElement.

Definition at line 462 of file lattice3d.C.

References oofem::FloatMatrix::at(), computeVolumeAround(), oofem::Element::giveCrossSection(), oofem::Element::integrationRulesArray, oofem::FloatMatrix::resize(), and oofem::FloatMatrix::zero().

Referenced by computeMassMatrix().

◆ computeMassMatrix()

void oofem::Lattice3d::computeMassMatrix	(	FloatMatrix &	answer,
		TimeStep *	tStep )

inlineoverrideprotectedvirtual

Computes mass matrix of receiver. Default implementation returns consistent mass matrix and uses numerical integration. Returns result of this->computeConsistentMassMatrix service, transformed into nodal coordinate system. Requires the computeNmatrixAt and giveMassMtrxIntegrationgMask services to be implemented.

Parameters

answer	Mass matrix.
tStep	Time step.

Reimplemented from oofem::StructuralElement.

Definition at line 147 of file lattice3d.h.

References computeLumpedMassMatrix().

◆ computeNumberOfDofs()

int oofem::Lattice3d::computeNumberOfDofs ( )

inlineoverridevirtual

Computes or simply returns total number of element's local DOFs. Must be defined by particular element.

Returns: Number of local DOFs of element.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 92 of file lattice3d.h.

◆ computePropertiesOfCrossSection()

void oofem::Lattice3d::computePropertiesOfCrossSection ( )

protected

This computes the geometrical properties of the element once.

◆ computeStiffnessMatrix()

void oofem::Lattice3d::computeStiffnessMatrix	(	FloatMatrix &	answer,
		MatResponseMode	rMode,
		TimeStep *	tStep )

overrideprotectedvirtual

Computes numerically stiffness matrix of receiver. Default implementation computes element stiffness using \( K=\int_v B^{\mathrm{T}} D B \mathrm{d}V \) formulae, where \( B \) is element geometric matrix and \( D \) is material stiffness matrix. No geometrical nonlinearity is taken into account. NUmerical integration procedure uses integrationRulesArray for numerical integration. Support for reduced or selected integration is implemented. The individual integration rules are assumed to correspond to different terms from which the overall matrix is assembled.

If there is one integration rule, the full integration of all coefficients is performed. Otherwise, integration is performed using following rules. Each integration rule can specify start and end strain index of strain vector components for which is valid. It is necessary to ensure that these start and end indexes, dividing geometrical matrix into blocks, are not overlapping and that each strain component is included.

Then stiffness matrix is obtained as summation of integrals \( I_{ij}=\int_v B^{\mathrm{T}}_i D_{ij} B_j \mathrm{d}V \) where \( B_i \) is i-th block of geometrical matrix and \( D_{ij} \) is corresponding constitutive sub-matrix. The geometrical matrix is obtained using computeBmatrixAt service and the constitutive matrix is obtained using computeConstitutiveMatrixAt service. The \( I_{ij} \) integral is evaluated using such integration rule, which is valid for i-th or j-th block and has smaller number of integration points.

For higher numerical performance, only one half of stiffness matrix is computed and answer is then symmetrized. Therefore, if element matrix will be generally nonsymmetric, one must specialize this method. Finally, the result is transformed into global coordinate system (or nodal coordinate system, if it is defined).

Parameters

answer	Computed stiffness matrix (symmetric).
rMode	Response mode.
tStep	Time step.

Reimplemented from oofem::StructuralElement.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 274 of file lattice3d.C.

References oofem::FloatMatrix::at(), oofem::FloatMatrix::beProductOf(), oofem::FloatMatrix::beTranspositionOf(), computeBmatrixAt(), computeConstitutiveMatrixAt(), computeVolumeAround(), oofem::Element::integrationRulesArray, oofem::FloatMatrix::resize(), and oofem::FloatMatrix::zero().

◆ computeStressVector()

void oofem::Lattice3d::computeStressVector	(	FloatArray &	answer,
		const FloatArray &	strain,
		GaussPoint *	gp,
		TimeStep *	tStep )

overrideprotectedvirtual

Computes the stress vector of receiver at given integration point, at time step tStep. The nature of these stresses depends on the element's type.

Parameters

answer	Stress vector.
strain	Strain vector.
gp	Integration point.
tStep	Time step.

Implements oofem::StructuralElement.

Definition at line 268 of file lattice3d.C.

References oofem::Element::giveCrossSection().

Referenced by oofem::Lattice3dBoundary::giveInternalForcesVector(), and oofem::Lattice3dBoundaryTruss::giveInternalForcesVector().

◆ computeVolumeAround()

double oofem::Lattice3d::computeVolumeAround ( GaussPoint * gp )

overridevirtual

Returns volume related to given integration point. Used typically in subroutines, that perform integration over element volume. Should be implemented by particular elements.

See also: GaussPoint

Parameters

gp	Integration point for which volume is computed.

Returns: Volume for integration point.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 366 of file lattice3d.C.

References area, computeGeometryProperties(), geometryFlag, and length.

Referenced by computeLumpedMassMatrix(), and computeStiffnessMatrix().

◆ drawDeformedGeometry()

void oofem::Lattice3d::drawDeformedGeometry	(	oofegGraphicContext &	gc,
		TimeStep *	tStep,
		UnknownType	type )

overridevirtual

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 843 of file lattice3d.C.

References gc, oofem::Element::giveNode(), OOFEG_DEFORMED_GEOMETRY_LAYER, and OOFEG_DEFORMED_GEOMETRY_WIDTH.

Referenced by drawYourself().

◆ drawRawCrossSections()

void oofem::Lattice3d::drawRawCrossSections	(	oofegGraphicContext &	gc,
		TimeStep *	tStep )

Definition at line 801 of file lattice3d.C.

References gc, numberOfPolygonVertices, OOFEG_RAW_CROSSSECTION_LAYER, OOFEG_RAW_GEOMETRY_WIDTH, and polygonCoords.

Referenced by drawYourself().

◆ drawRawGeometry()

void oofem::Lattice3d::drawRawGeometry	(	oofegGraphicContext &	gc,
		TimeStep *	tStep )

overridevirtual

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 773 of file lattice3d.C.

References gc, oofem::Element::giveNode(), OOFEG_RAW_GEOMETRY_LAYER, and OOFEG_RAW_GEOMETRY_WIDTH.

Referenced by drawYourself().

◆ drawYourself()

void oofem::Lattice3d::drawYourself	(	oofegGraphicContext &	context,
		TimeStep *	tStep )

overridevirtual

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 750 of file lattice3d.C.

References drawDeformedGeometry(), drawRawCrossSections(), drawRawGeometry(), oofem::Element::drawScalar(), oofem::Element::drawSpecial(), gc, oofem::OGC_deformedGeometry, oofem::OGC_eigenVectorGeometry, oofem::OGC_elemSpecial, oofem::OGC_rawGeometry, oofem::OGC_scalarPlot, and OOFEM_ERROR.

◆ giveArea()

double oofem::Lattice3d::giveArea ( )

overridevirtual

Returns the cross-sectional area of the lattice element.

Returns: Cross-section area.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 308 of file lattice3d.C.

References area, computeGeometryProperties(), and geometryFlag.

◆ giveClassName()

const char * oofem::Lattice3d::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 125 of file lattice3d.h.

◆ giveCouplingFlag()

int oofem::Lattice3d::giveCouplingFlag ( )

inlineoverridevirtual

Returns the coupling flag.

Returns: couplingFlag

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 109 of file lattice3d.h.

References couplingFlag.

◆ giveCouplingNumbers()

void oofem::Lattice3d::giveCouplingNumbers ( IntArray & numbers )

inlineoverridevirtual

Returns the coupling numbers

Returns: couplingNumbers.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 111 of file lattice3d.h.

◆ giveCrackFlag()

int oofem::Lattice3d::giveCrackFlag ( )

overridevirtual

Returns the crack flag

Returns: Crack flag.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 221 of file lattice3d.C.

References oofem::LatticeMaterialStatus::giveCrackFlag(), oofem::Element::giveDefaultIntegrationRulePtr(), and oofem::GaussPoint::giveMaterialStatus().

◆ giveCrackWidth()

double oofem::Lattice3d::giveCrackWidth ( )

overridevirtual

Returns: Crack width

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 233 of file lattice3d.C.

References oofem::LatticeMaterialStatus::giveCrackWidth(), oofem::Element::giveDefaultIntegrationRulePtr(), and oofem::GaussPoint::giveMaterialStatus().

◆ giveCrossSectionCoordinates()

void oofem::Lattice3d::giveCrossSectionCoordinates ( FloatArray & coords )

inlineoverridevirtual

This function gives the cross-section coordinates.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 116 of file lattice3d.h.

References polygonCoords.

◆ giveDofManDofIDMask()

void oofem::Lattice3d::giveDofManDofIDMask	(	int	inode,
		IntArray &	answer ) const

overridevirtual

Returns dofmanager dof mask for node. This mask defines the dofs which are used by element in node. Mask influences the code number ordering for particular node. Code numbers are ordered according to node order and dofs belonging to particular node are ordered according to this mask. If element requests dofs using node mask which are not in node then error is generated. This masking allows node to be shared by different elements with different dofs in same node. Elements local code numbers are extracted from node using this mask. Must be defined by particular element.

Parameters

inode	Mask is computed for local dofmanager with inode number.
answer	Mask for node.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 376 of file lattice3d.C.

◆ giveGeometryType()

Element_Geometry_Type oofem::Lattice3d::giveGeometryType ( ) const

inlineoverridevirtual

Returns the element geometry type. This information is assumed to be of general interest, but it is required only for some specialized tasks.

Returns: Geometry type of element.

Implements oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 129 of file lattice3d.h.

◆ giveGPCoordinates()

void oofem::Lattice3d::giveGPCoordinates ( FloatArray & coords )

virtual

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 199 of file lattice3d.C.

References computeGeometryProperties(), geometryFlag, globalCentroid, and oofem::FloatArray::resize().

◆ giveInputRecordName()

const char * oofem::Lattice3d::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Implements oofem::FEMComponent.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 124 of file lattice3d.h.

References _IFT_Lattice3d_Name.

◆ giveIntegrationDomain()

integrationDomain oofem::Lattice3d::giveIntegrationDomain ( ) const

inlineoverrideprotectedvirtual

Returns integration domain for receiver, used to initialize integration point over receiver volume. Default behavior is taken from the default interpolation.

Returns: Integration domain of element.

Reimplemented from oofem::Element.

Definition at line 159 of file lattice3d.h.

References oofem::_Line.

◆ giveLength()

double oofem::Lattice3d::giveLength ( )

overridevirtual

Returns the element length

Returns: Element length.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 210 of file lattice3d.C.

References computeGeometryProperties(), geometryFlag, and length.

◆ giveLocalCoordinateSystem()

int oofem::Lattice3d::giveLocalCoordinateSystem ( FloatMatrix & answer )

overridevirtual

Returns local coordinate system of receiver Required by material models with ortho- and anisotrophy. Returns a unit vectors of local coordinate system at element stored row-wise. If local system is equal to global one, set answer to empty matrix and return zero value.

Returns: nonzero if answer computed, zero value if answer is empty, i.e. no transformation is necessary.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 353 of file lattice3d.C.

References computeGeometryProperties(), geometryFlag, and localCoordinateSystem.

Referenced by computeGtoLRotationMatrix().

◆ giveNormalStress()

double oofem::Lattice3d::giveNormalStress ( )

overridevirtual

Returns the normal stress.

Returns: normalStress

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 341 of file lattice3d.C.

References oofem::Element::giveDefaultIntegrationRulePtr(), oofem::GaussPoint::giveMaterialStatus(), and oofem::LatticeMaterialStatus::giveNormalLatticeStress().

◆ giveNumberOfCrossSectionNodes()

int oofem::Lattice3d::giveNumberOfCrossSectionNodes ( )

inlineoverridevirtual

Returns the number of crossSection nodes

Returns: Number of crosssection nodes.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 98 of file lattice3d.h.

References numberOfPolygonVertices.

◆ giveOldPlasticStrain()

void oofem::Lattice3d::giveOldPlasticStrain ( FloatArray & plas )

overridevirtual

Returns plastic strains

Returns: plasticStrains

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 253 of file lattice3d.C.

References oofem::Element::giveDefaultIntegrationRulePtr(), oofem::Element::giveMaterial(), and oofem::LatticeMaterialStatus::giveOldPlasticLatticeStrain().

◆ givePlasticStrain()

void oofem::Lattice3d::givePlasticStrain ( FloatArray & plas )

overridevirtual

Returns plastic strains

Returns: plasticStrains

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 244 of file lattice3d.C.

References oofem::Element::giveDefaultIntegrationRulePtr(), oofem::Element::giveMaterial(), and oofem::LatticeMaterialStatus::givePlasticLatticeStrain().

◆ givePressures()

void oofem::Lattice3d::givePressures ( FloatArray & pressures )

inlineoverridevirtual

Returns pressures

Returns: pressures.

Reimplemented from oofem::LatticeStructuralElement.

Definition at line 107 of file lattice3d.h.

References pressures.

◆ initializeFrom()

void oofem::Lattice3d::initializeFrom	(	InputRecord &	ir,
		int	priority )

overridevirtual

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 384 of file lattice3d.C.

References couplingFlag, couplingNumbers, oofem::FEMComponent::giveDomain(), IPK_Lattice3d_couplingflag, IPK_Lattice3d_couplingnumber, IPK_Lattice3d_mlength, IPK_Lattice3d_polycoords, IPK_Lattice3d_pressures, minLength, oofem::FEMComponent::number, PM_UPDATE_PARAMETER, polygonCoords, and pressures.

◆ postInitialize()

void oofem::Lattice3d::postInitialize ( )

overridevirtual

Performs post initialization steps.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 397 of file lattice3d.C.

References numberOfPolygonVertices, and polygonCoords.

◆ restoreContext()

void oofem::Lattice3d::restoreContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::Element.

Reimplemented in oofem::Lattice3dBoundary, and oofem::Lattice3dBoundaryTruss.

Definition at line 726 of file lattice3d.C.

References oofem::CIO_IOERR, oofem::CIO_OK, CM_Definition, couplingNumbers, polygonCoords, oofem::DataStream::read(), and THROW_CIOERR.

◆ saveContext()

void oofem::Lattice3d::saveContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::Element.

double oofem::Lattice3d::eccT

protected

Definition at line 65 of file lattice3d.h.

Referenced by computeBmatrixAt(), oofem::Lattice3dBoundary::computeBmatrixAt(), oofem::Lattice3dBoundaryTruss::computeBmatrixAt(), computeCrossSectionProperties(), and Lattice3d().

protected

Definition at line 70 of file lattice3d.h.

Referenced by givePressures(), and initializeFrom().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Member Functions

Protected Attributes

Static Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Lattice3d()

◆ ~Lattice3d()

Member Function Documentation

◆ computeBmatrixAt()

◆ computeConstitutiveMatrixAt()

◆ computeCrossSectionProperties()

◆ computeGaussPoints()

◆ computeGeometryProperties()

◆ computeGlobalCoordinates()

◆ computeGtoLRotationMatrix()

◆ computeLumpedMassMatrix()

◆ computeMassMatrix()

◆ computeNumberOfDofs()

◆ computePropertiesOfCrossSection()

◆ computeStiffnessMatrix()

◆ computeStressVector()

◆ computeVolumeAround()

◆ drawDeformedGeometry()

◆ drawRawCrossSections()

◆ drawRawGeometry()

◆ drawYourself()

◆ giveArea()

◆ giveClassName()

◆ giveCouplingFlag()

◆ giveCouplingNumbers()

◆ giveCrackFlag()

◆ giveCrackWidth()

◆ giveCrossSectionCoordinates()

◆ giveDofManDofIDMask()

◆ giveGeometryType()

◆ giveGPCoordinates()

◆ giveInputRecordName()

◆ giveIntegrationDomain()

◆ giveLength()

◆ giveLocalCoordinateSystem()

◆ giveNormalStress()

◆ giveNumberOfCrossSectionNodes()

◆ giveOldPlasticStrain()

◆ givePlasticStrain()

◆ givePressures()

◆ initializeFrom()

◆ postInitialize()

◆ restoreContext()

◆ saveContext()

Member Data Documentation

◆ area

◆ centroid

◆ couplingFlag

◆ couplingNumbers

◆ eccS

◆ eccT

◆ geometryFlag

◆ globalCentroid

◆ I1

◆ I2

◆ Ip

◆ IPK_Lattice3d_couplingflag

◆ IPK_Lattice3d_couplingnumber

◆ IPK_Lattice3d_mlength

◆ IPK_Lattice3d_polycoords

◆ IPK_Lattice3d_pressures

◆ kappa

◆ length

◆ localCoordinateSystem

◆ midPoint

◆ minLength

◆ normal

◆ numberOfPolygonVertices

◆ polygonCoords

◆ pressures