#include <mps.h>

Inheritance diagram for oofem::MPSMaterialStatus:

Collaboration diagram for oofem::MPSMaterialStatus:

Public Member Functions
	MPSMaterialStatus (GaussPoint *g, int nunits)
void	initTempStatus () override
void	updateYourself (TimeStep *tStep) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
double	giveHum ()
	Returns relative humidity.
void	setHum (double src)
	Stores relative humidity.
double	giveHumIncrement ()
	Returns relative humidity increment.
void	setHumIncrement (double src)
	Stores relative humidity increment.
double	giveHumNano ()
	Returns relative humidity (nanopores).
void	setHumNanoTemp (double src)
	Stores relative humidity (nanopores).
double	giveHumMin ()
	Returns previously minimum previously reached humidity - treatment of cyclic ambient coditions.
void	setHumMin (double src)
	Stores minimum reached humidity.
double	giveT ()
	Returns temperature.
void	setT (double src)
	Stores temperature.
double	giveTIncrement ()
	Returns temperature increment.
void	setTIncrement (double src)
	Stores temperature increment.
double	giveTmax ()
	Returns previously maximum reached temperature.
void	setTmax (double src)
	Stores maximum reached temperature.
double	giveEquivalentTime ()
	Returns equivalent time.
void	setEquivalentTimeTemp (double src)
	Stores equivalent time.
double	giveFlowTermViscosity ()
	Returns viscosity of the flow term (associated with q4 and microprestress evolution).
double	giveFlowTermViscosityTemp ()
void	setFlowTermViscosityTemp (double src)
void	storeEmodulus (double src)
	Returns Emodulus if computed previously in the same tStep.
void	setEmodulusFlag (bool src)
double	giveStoredEmodulus (void)
	Returns Emodulus if computed previously in the same tStep.
bool	giveStoredEmodulusFlag (void)
void	setTempDryingShrinkageStrain (double src)
double	giveTempDryingShrinkageStrain (void)
double	giveDryingShrinkageStrain (void)
void	setTempAutogenousShrinkageStrain (double src)
double	giveTempAutogenousShrinkageStrain (void)
double	giveAutogenousShrinkageStrain (void)
void	setCreepStrainIncrement (FloatArray src)
const FloatArray &	giveCreepStrain () const
const char *	giveClassName () const override
Public Member Functions inherited from oofem::KelvinChainSolidMaterialStatus
	KelvinChainSolidMaterialStatus (GaussPoint *g, int nunits)
void	printOutputAt (FILE file, TimeStep tStep) const override
	Print receiver's output to given stream.
Public Member Functions inherited from oofem::RheoChainMaterialStatus
	RheoChainMaterialStatus (GaussPoint *g, int nunits)
void	printOutputAt (FILE file, TimeStep tStep) const override
	Print receiver's output to given stream.
virtual const FloatArray &	giveViscoelasticStressVector () const
FloatArray &	giveHiddenVarsVector (int i)
FloatArray &	giveTempHiddenVarsVector (int i)
FloatArray *	letHiddenVarsVectorBe (int i, FloatArray *)
void	letTempHiddenVarsVectorBe (int i, FloatArray &valueArray)
FloatArray *	giveShrinkageStrainVector ()
void	setShrinkageStrainVector (FloatArray src)
double	giveCurrentTime ()
	Returns current time - see explanation near initTempStatus in giveRealStressVector.
void	setCurrentTime (double src)
	Stores current time.
void	initTempStatus () override
void	updateYourself (TimeStep *tStep) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
void	setTempThermalStrain (double src)
double	giveTempThermalStrain (void)
double	giveThermalStrain (void)
const char *	giveClassName () const override
Public Member Functions inherited from oofem::StructuralMaterialStatus
	StructuralMaterialStatus (GaussPoint *g)
	Constructor. Creates new StructuralMaterialStatus with IntegrationPoint g.
void	printOutputAt (FILE file, TimeStep tStep) const override
	Print receiver's output to given stream.
void	initTempStatus () override
void	updateYourself (TimeStep *tStep) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
const FloatArray &	giveStrainVector () const
	Returns the const pointer to receiver's strain vector.
const FloatArray &	giveStressVector () const
	Returns the const pointer to receiver's stress vector.
const FloatArray &	givePVector () const
	Returns the const pointer to receiver's first Piola-Kirchhoff stress vector.
const FloatArray &	giveCVector () const
	Returns the const pointer to receiver's Cauchy stress vector.
const FloatArray &	giveFVector () const
	Returns the const pointer to receiver's deformation gradient vector.
const FloatArray &	giveTempStrainVector () const
	Returns the const pointer to receiver's temporary strain vector.
const FloatArray &	giveTempStressVector () const
	Returns the const pointer to receiver's temporary stress vector.
const FloatArray &	giveTempPVector () const
	Returns the const pointer to receiver's temporary first Piola-Kirchhoff stress vector.
const FloatArray &	giveTempCVector () const
	Returns the const pointer to receiver's temporary Cauchy stress vector.
const FloatArray &	giveTempFVector () const
	Returns the const pointer to receiver's temporary deformation gradient vector.
void	letStrainVectorBe (const FloatArray &v)
	Assigns strain vector to given vector v.
void	letStressVectorBe (const FloatArray &v)
	Assigns stressVector to given vector v.
void	letPVectorBe (const FloatArray &v)
	Assigns PVector to given vector v.
void	letCVectorBe (const FloatArray &v)
	Assigns CVector to given vector v.
void	letFVectorBe (const FloatArray &v)
	Assigns FVector to given vector v.
void	letTempStressVectorBe (const FloatArray &v)
	Assigns tempStressVector to given vector v.
void	letTempStrainVectorBe (const FloatArray &v)
	Assigns tempStrainVector to given vector v.
void	letTempPVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v.
void	letTempCVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v.
void	letTempFVectorBe (const FloatArray &v)
	Assigns tempFVector to given vector v.
const char *	giveClassName () const override
void	copyStateVariables (const MaterialStatus &iStatus) override
	Functions for MaterialStatusMapperInterface.
void	addStateVariables (const MaterialStatus &iStatus) override
Public Member Functions inherited from oofem::MaterialStatus
	MaterialStatus (GaussPoint *g)
virtual bool	giveMaterialProperty (int propID, double &value)
virtual void	setMaterialProperty (int propID, double value)
Public Member Functions inherited from oofem::IntegrationPointStatus
	IntegrationPointStatus (GaussPoint *g)
virtual	~IntegrationPointStatus ()=default
	Destructor.
virtual void	setStatusVariable (int varID, double value)
virtual Interface *	giveInterface (InterfaceType t)
Public Member Functions inherited from oofem::MaterialStatusMapperInterface
	MaterialStatusMapperInterface ()
virtual	~MaterialStatusMapperInterface ()
virtual int	MSMI_map (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
virtual int	MSMI_map_cz (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
virtual int	MSMI_update (const GaussPoint &iGP, const TimeStep &iTStep)
virtual int	MSMI_finish (const TimeStep &iTStep)

Protected Attributes
double	hum = -1.
	Values of humidity and temperature in a particular GP, their increment, and maximum/minimum to treat cyclic ambient conditions.
double	hum_increment = -1.
double	h_min = 1.
double	T = -1.
double	T_increment = -1.
double	T_max = 0.
double	equivalentTime = 0.
	Hidden variable - equivalent time: necessary to compute solidified volume.
double	equivalentTimeTemp = 0.
double	flowTermViscosity = 0.
double	flowTermViscosityTemp = -1.
bool	storedEmodulusFlag = false
	flag for Emodulus - true if modulus has been already computed in the current time step
double	storedEmodulus = -1.
double	humNano = -1.
	value of relative humidity in the nanopores
double	humNanoTemp = -1.
double	dryingShrinkageStrain = 0.
double	tempDryingShrinkageStrain = 0.
double	autogenousShrinkageStrain = 0.
double	tempAutogenousShrinkageStrain = 0.
FloatArray	creepStrain
FloatArray	creepStrainIncrement
Protected Attributes inherited from oofem::RheoChainMaterialStatus
int	nUnits = 0
	Number of units in the chain.
std ::vector< FloatArray >	hiddenVars
	Hidden (internal) variables, the meaning of which depends on the type of chain.
std ::vector< FloatArray >	tempHiddenVars
FloatArray	shrinkageStrain
double	currentTime = 0.
double	thermalStrain = 0.
double	tempThermalStrain = 0.
Protected Attributes inherited from oofem::StructuralMaterialStatus
FloatArray	strainVector
	Equilibrated strain vector in reduced form.
FloatArray	stressVector
	Equilibrated stress vector in reduced form.
FloatArray	tempStressVector
	Temporary stress vector in reduced form (increments are used mainly in nonlinear analysis).
FloatArray	tempStrainVector
	Temporary strain vector in reduced form (to find balanced state).
FloatArray	PVector
	Equilibrated first Piola-Kirchhoff stress vector.
FloatArray	tempPVector
	Temporary first Piola-Kirchhoff stress vector (to find balanced state).
FloatArray	CVector
	Equilibrated Cauchy stress vector.
FloatArray	tempCVector
	Temporary Cauchy stress vector (to find balanced state).
FloatArray	FVector
	Equilibrated deformation gradient in reduced form.
FloatArray	tempFVector
	Temporary deformation gradient in reduced form (to find balanced state).
Protected Attributes inherited from oofem::IntegrationPointStatus
GaussPoint *	gp
	Associated integration point.
Protected Attributes inherited from oofem::MaterialStatusMapperInterface
std::unique_ptr< MaterialMappingAlgorithm >	mpMaterialMapper

Detailed Description

This class implements associated Material Status to MPSMaterial, which corresponds to a model for humidity- and temperature-dependent creep of concrete according to the microprestress-solidification theory. At room temperature and 100% relative humidity, it reduces to model B3 for basic creep of concrete.

Definition at line 104 of file mps.h.

Constructor & Destructor Documentation

◆ MPSMaterialStatus()

oofem::MPSMaterialStatus::MPSMaterialStatus	(	GaussPoint *	g,
		int	nunits )

Definition at line 54 of file mps.C.

References creepStrain, creepStrainIncrement, oofem::StructuralMaterial::giveSizeOfVoigtSymVector(), oofem::IntegrationPointStatus::gp, and oofem::KelvinChainSolidMaterialStatus::KelvinChainSolidMaterialStatus().

Referenced by oofem::MPSDamMaterialStatus::MPSDamMaterialStatus().

Member Function Documentation

◆ giveAutogenousShrinkageStrain()

double oofem::MPSMaterialStatus::giveAutogenousShrinkageStrain ( void )

inline

Definition at line 206 of file mps.h.

References autogenousShrinkageStrain.

Referenced by oofem::MPSMaterial::giveIPValue(), and oofem::MPSMaterial::giveShrinkageStrainVector().

◆ giveClassName()

const char * oofem::MPSMaterialStatus::giveClassName ( ) const

inlineoverridevirtual

Reimplemented from oofem::KelvinChainSolidMaterialStatus.

Definition at line 213 of file mps.h.

◆ giveCreepStrain()

const FloatArray & oofem::MPSMaterialStatus::giveCreepStrain ( ) const

inline

Definition at line 209 of file mps.h.

References creepStrain.

Referenced by oofem::MPSMaterial::giveEigenStrainVector(), and oofem::MPSMaterial::giveIPValue().

◆ giveDryingShrinkageStrain()

double oofem::MPSMaterialStatus::giveDryingShrinkageStrain ( void )

inline

Definition at line 202 of file mps.h.

References dryingShrinkageStrain.

Referenced by oofem::MPSMaterial::giveIPValue(), and oofem::MPSMaterial::giveShrinkageStrainVector().

◆ giveEquivalentTime()

double oofem::MPSMaterialStatus::giveEquivalentTime ( )

inline

Returns equivalent time.

Definition at line 183 of file mps.h.

References equivalentTime.

Referenced by oofem::MPSMaterial::computeAutogenousShrinkageDefinedByTF(), oofem::MPSMaterial::computeB4AutogenousShrinkageStrainVector(), oofem::MPSMaterial::computeEquivalentTime(), oofem::MPSMaterial::computeFibAutogenousShrinkageStrainVector(), and oofem::MPSMaterial::giveIPValue().

◆ giveFlowTermViscosity()

double oofem::MPSMaterialStatus::giveFlowTermViscosity ( )

inline

Returns viscosity of the flow term (associated with q4 and microprestress evolution).

Definition at line 188 of file mps.h.

References flowTermViscosity.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity(), oofem::MPSMaterial::giveEigenStrainVector(), and oofem::MPSMaterial::giveEModulus().

◆ giveFlowTermViscosityTemp()

double oofem::MPSMaterialStatus::giveFlowTermViscosityTemp ( )

inline

Definition at line 189 of file mps.h.

References flowTermViscosityTemp.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity().

◆ giveHum()

double oofem::MPSMaterialStatus::giveHum ( )

inline

Returns relative humidity.

Definition at line 147 of file mps.h.

References hum.

Referenced by oofem::MPSMaterial::giveHumidity().

◆ giveHumIncrement()

double oofem::MPSMaterialStatus::giveHumIncrement ( )

inline

Returns relative humidity increment.

Definition at line 151 of file mps.h.

References hum_increment.

Referenced by oofem::MPSMaterial::giveHumidity().

◆ giveHumMin()

double oofem::MPSMaterialStatus::giveHumMin ( )

inline

Returns previously minimum previously reached humidity - treatment of cyclic ambient coditions.

Definition at line 162 of file mps.h.

References h_min.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity().

◆ giveHumNano()

double oofem::MPSMaterialStatus::giveHumNano ( )

inline

Returns relative humidity (nanopores).

Definition at line 157 of file mps.h.

References humNano.

Referenced by oofem::MPSMaterial::giveHumidityNano().

◆ giveStoredEmodulus()

double oofem::MPSMaterialStatus::giveStoredEmodulus ( void )

inline

Returns Emodulus if computed previously in the same tStep.

Definition at line 196 of file mps.h.

References storedEmodulus.

Referenced by oofem::MPSMaterial::giveEModulus(), and oofem::MPSMaterial::giveIPValue().

◆ giveStoredEmodulusFlag()

bool oofem::MPSMaterialStatus::giveStoredEmodulusFlag ( void )

inline

Definition at line 197 of file mps.h.

References storedEmodulusFlag.

Referenced by oofem::MPSMaterial::giveEModulus().

◆ giveT()

double oofem::MPSMaterialStatus::giveT ( )

inline

Returns temperature.

Definition at line 168 of file mps.h.

References T.

Referenced by oofem::MPSMaterial::giveTemperature().

◆ giveTempAutogenousShrinkageStrain()

double oofem::MPSMaterialStatus::giveTempAutogenousShrinkageStrain ( void )

inline

Definition at line 205 of file mps.h.

References tempAutogenousShrinkageStrain.

Referenced by oofem::MPSDamMaterial::giveRealStressVector().

◆ giveTempDryingShrinkageStrain()

double oofem::MPSMaterialStatus::giveTempDryingShrinkageStrain ( void )

inline

Definition at line 201 of file mps.h.

References tempDryingShrinkageStrain.

Referenced by oofem::MPSDamMaterial::giveRealStressVector().

◆ giveTIncrement()

double oofem::MPSMaterialStatus::giveTIncrement ( )

inline

Returns temperature increment.

Definition at line 173 of file mps.h.

References T_increment.

Referenced by oofem::MPSMaterial::giveTemperature().

◆ giveTmax()

double oofem::MPSMaterialStatus::giveTmax ( )

inline

Returns previously maximum reached temperature.

Definition at line 178 of file mps.h.

References T_max.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity().

◆ initTempStatus()

void oofem::MPSMaterialStatus::initTempStatus ( )

overridevirtual

Initializes the temporary internal variables, describing the current state according to previously reached equilibrium internal variables.

Reimplemented from oofem::KelvinChainSolidMaterialStatus.

Definition at line 101 of file mps.C.

References creepStrainIncrement, equivalentTimeTemp, flowTermViscosityTemp, hum, hum_increment, humNanoTemp, oofem::KelvinChainSolidMaterialStatus::initTempStatus(), storedEmodulus, storedEmodulusFlag, T, T_increment, tempAutogenousShrinkageStrain, and tempDryingShrinkageStrain.

◆ restoreContext()

void oofem::MPSMaterialStatus::restoreContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::KelvinChainSolidMaterialStatus.

Definition at line 154 of file mps.C.

References oofem::CIO_IOERR, equivalentTime, flowTermViscosity, h_min, humNano, oofem::DataStream::read(), oofem::KelvinChainSolidMaterialStatus::restoreContext(), T_max, and THROW_CIOERR.

◆ saveContext()

void oofem::MPSMaterialStatus::saveContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::KelvinChainSolidMaterialStatus.

Definition at line 128 of file mps.C.

References oofem::CIO_IOERR, equivalentTime, flowTermViscosity, h_min, humNano, oofem::KelvinChainSolidMaterialStatus::saveContext(), T_max, THROW_CIOERR, and oofem::DataStream::write().

◆ setCreepStrainIncrement()

void oofem::MPSMaterialStatus::setCreepStrainIncrement ( FloatArray src )

inline

Definition at line 208 of file mps.h.

References creepStrainIncrement.

Referenced by oofem::MPSMaterial::giveEigenStrainVector().

◆ setEmodulusFlag()

void oofem::MPSMaterialStatus::setEmodulusFlag ( bool src )

inline

Definition at line 194 of file mps.h.

References storedEmodulusFlag.

Referenced by oofem::MPSMaterial::giveEModulus().

◆ setEquivalentTimeTemp()

void oofem::MPSMaterialStatus::setEquivalentTimeTemp ( double src )

inline

Stores equivalent time.

Definition at line 185 of file mps.h.

References equivalentTimeTemp.

Referenced by oofem::MPSMaterial::giveRealStressVector().

◆ setFlowTermViscosityTemp()

void oofem::MPSMaterialStatus::setFlowTermViscosityTemp ( double src )

inline

Definition at line 190 of file mps.h.

References flowTermViscosityTemp.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity().

◆ setHum()

void oofem::MPSMaterialStatus::setHum ( double src )

inline

Stores relative humidity.

Definition at line 149 of file mps.h.

References hum.

Referenced by oofem::MPSMaterial::giveHumidity().

◆ setHumIncrement()

void oofem::MPSMaterialStatus::setHumIncrement ( double src )

inline

Stores relative humidity increment.

Definition at line 153 of file mps.h.

References hum_increment.

Referenced by oofem::MPSMaterial::giveHumidity().

◆ setHumMin()

void oofem::MPSMaterialStatus::setHumMin ( double src )

inline

Stores minimum reached humidity.

Definition at line 164 of file mps.h.

References h_min.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity().

◆ setHumNanoTemp()

void oofem::MPSMaterialStatus::setHumNanoTemp ( double src )

inline

Stores relative humidity (nanopores).

Definition at line 159 of file mps.h.

References humNanoTemp.

Referenced by oofem::MPSMaterial::giveHumidityNano().

◆ setT()

void oofem::MPSMaterialStatus::setT ( double src )

inline

Stores temperature.

Definition at line 170 of file mps.h.

References T.

Referenced by oofem::MPSMaterial::giveTemperature().

◆ setTempAutogenousShrinkageStrain()

void oofem::MPSMaterialStatus::setTempAutogenousShrinkageStrain ( double src )

inline

Definition at line 204 of file mps.h.

References tempAutogenousShrinkageStrain.

Referenced by oofem::MPSMaterial::giveShrinkageStrainVector().

◆ setTempDryingShrinkageStrain()

void oofem::MPSMaterialStatus::setTempDryingShrinkageStrain ( double src )

inline

Definition at line 200 of file mps.h.

References tempDryingShrinkageStrain.

Referenced by oofem::MPSMaterial::giveShrinkageStrainVector().

◆ setTIncrement()

void oofem::MPSMaterialStatus::setTIncrement ( double src )

inline

Stores temperature increment.

Definition at line 175 of file mps.h.

References T_increment.

Referenced by oofem::MPSMaterial::giveTemperature().

◆ setTmax()

void oofem::MPSMaterialStatus::setTmax ( double src )

inline

Stores maximum reached temperature.

Definition at line 180 of file mps.h.

References T_max.

Referenced by oofem::MPSMaterial::computeFlowTermViscosity().

◆ storeEmodulus()

void oofem::MPSMaterialStatus::storeEmodulus ( double src )

inline

Returns Emodulus if computed previously in the same tStep.

Definition at line 193 of file mps.h.

References storedEmodulus.

Referenced by oofem::MPSMaterial::giveEModulus().

◆ updateYourself()

void oofem::MPSMaterialStatus::updateYourself ( TimeStep * )

overridevirtual

Update equilibrium history variables according to temp-variables. Invoked, after new equilibrium state has been reached.

Reimplemented from oofem::KelvinChainSolidMaterialStatus.

Definition at line 65 of file mps.C.

References autogenousShrinkageStrain, creepStrain, creepStrainIncrement, dryingShrinkageStrain, equivalentTime, equivalentTimeTemp, flowTermViscosity, flowTermViscosityTemp, hum, hum_increment, humNano, humNanoTemp, storedEmodulus, storedEmodulusFlag, T, T_increment, tempAutogenousShrinkageStrain, tempDryingShrinkageStrain, and oofem::KelvinChainSolidMaterialStatus::updateYourself().

Member Data Documentation

◆ autogenousShrinkageStrain

double oofem::MPSMaterialStatus::autogenousShrinkageStrain = 0.

protected

Definition at line 130 of file mps.h.

Referenced by giveAutogenousShrinkageStrain(), and updateYourself().

◆ creepStrain

FloatArray oofem::MPSMaterialStatus::creepStrain

protected

Definition at line 132 of file mps.h.

Referenced by giveCreepStrain(), MPSMaterialStatus(), and updateYourself().

◆ creepStrainIncrement

FloatArray oofem::MPSMaterialStatus::creepStrainIncrement

protected

Definition at line 133 of file mps.h.

Referenced by initTempStatus(), MPSMaterialStatus(), setCreepStrainIncrement(), and updateYourself().

◆ dryingShrinkageStrain

double oofem::MPSMaterialStatus::dryingShrinkageStrain = 0.

protected

Definition at line 128 of file mps.h.

Referenced by giveDryingShrinkageStrain(), and updateYourself().

◆ equivalentTime

double oofem::MPSMaterialStatus::equivalentTime = 0.

protected

Hidden variable - equivalent time: necessary to compute solidified volume.

Definition at line 115 of file mps.h.

Referenced by giveEquivalentTime(), restoreContext(), saveContext(), and updateYourself().

◆ equivalentTimeTemp

double oofem::MPSMaterialStatus::equivalentTimeTemp = 0.

protected

Definition at line 116 of file mps.h.

Referenced by initTempStatus(), setEquivalentTimeTemp(), and updateYourself().

◆ flowTermViscosity

double oofem::MPSMaterialStatus::flowTermViscosity = 0.

protected

Definition at line 117 of file mps.h.

Referenced by giveFlowTermViscosity(), restoreContext(), saveContext(), and updateYourself().

◆ flowTermViscosityTemp

double oofem::MPSMaterialStatus::flowTermViscosityTemp = -1.

protected

Definition at line 118 of file mps.h.

Referenced by giveFlowTermViscosityTemp(), initTempStatus(), setFlowTermViscosityTemp(), and updateYourself().

◆ h_min

double oofem::MPSMaterialStatus::h_min = 1.

protected

Definition at line 110 of file mps.h.

Referenced by giveHumMin(), restoreContext(), saveContext(), and setHumMin().

◆ hum

double oofem::MPSMaterialStatus::hum = -1.

protected

Values of humidity and temperature in a particular GP, their increment, and maximum/minimum to treat cyclic ambient conditions.

Definition at line 108 of file mps.h.

Referenced by giveHum(), initTempStatus(), setHum(), and updateYourself().

◆ hum_increment

double oofem::MPSMaterialStatus::hum_increment = -1.

protected

Definition at line 109 of file mps.h.

Referenced by giveHumIncrement(), initTempStatus(), setHumIncrement(), and updateYourself().

◆ humNano

double oofem::MPSMaterialStatus::humNano = -1.

protected

value of relative humidity in the nanopores

Definition at line 124 of file mps.h.

Referenced by giveHumNano(), restoreContext(), saveContext(), and updateYourself().

◆ humNanoTemp

double oofem::MPSMaterialStatus::humNanoTemp = -1.

protected

Definition at line 125 of file mps.h.

Referenced by initTempStatus(), setHumNanoTemp(), and updateYourself().

◆ storedEmodulus

double oofem::MPSMaterialStatus::storedEmodulus = -1.

protected

Definition at line 121 of file mps.h.

Referenced by giveStoredEmodulus(), initTempStatus(), storeEmodulus(), and updateYourself().

◆ storedEmodulusFlag

bool oofem::MPSMaterialStatus::storedEmodulusFlag = false

protected

flag for Emodulus - true if modulus has been already computed in the current time step

Definition at line 120 of file mps.h.

Referenced by giveStoredEmodulusFlag(), initTempStatus(), setEmodulusFlag(), and updateYourself().

◆ T

double oofem::MPSMaterialStatus::T = -1.

protected

Definition at line 111 of file mps.h.

Referenced by giveT(), initTempStatus(), setT(), and updateYourself().

◆ T_increment

double oofem::MPSMaterialStatus::T_increment = -1.

protected

Definition at line 112 of file mps.h.

Referenced by giveTIncrement(), initTempStatus(), setTIncrement(), and updateYourself().

◆ T_max

double oofem::MPSMaterialStatus::T_max = 0.

protected

Definition at line 113 of file mps.h.

Referenced by giveTmax(), restoreContext(), saveContext(), and setTmax().

◆ tempAutogenousShrinkageStrain

double oofem::MPSMaterialStatus::tempAutogenousShrinkageStrain = 0.

protected

Definition at line 131 of file mps.h.

Referenced by giveTempAutogenousShrinkageStrain(), initTempStatus(), setTempAutogenousShrinkageStrain(), and updateYourself().

◆ tempDryingShrinkageStrain

double oofem::MPSMaterialStatus::tempDryingShrinkageStrain = 0.

protected

Definition at line 129 of file mps.h.

Referenced by giveTempDryingShrinkageStrain(), initTempStatus(), setTempDryingShrinkageStrain(), and updateYourself().

The documentation for this class was generated from the following files:

mps.h
mps.C

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ MPSMaterialStatus()

Member Function Documentation

◆ giveAutogenousShrinkageStrain()

◆ giveClassName()

◆ giveCreepStrain()

◆ giveDryingShrinkageStrain()

◆ giveEquivalentTime()

◆ giveFlowTermViscosity()

◆ giveFlowTermViscosityTemp()

◆ giveHum()

◆ giveHumIncrement()

◆ giveHumMin()

◆ giveHumNano()

◆ giveStoredEmodulus()

◆ giveStoredEmodulusFlag()

◆ giveT()

◆ giveTempAutogenousShrinkageStrain()

◆ giveTempDryingShrinkageStrain()

◆ giveTIncrement()

◆ giveTmax()

◆ initTempStatus()

◆ restoreContext()

◆ saveContext()

◆ setCreepStrainIncrement()

◆ setEmodulusFlag()

◆ setEquivalentTimeTemp()

◆ setFlowTermViscosityTemp()

◆ setHum()

◆ setHumIncrement()

◆ setHumMin()

◆ setHumNanoTemp()

◆ setT()

◆ setTempAutogenousShrinkageStrain()

◆ setTempDryingShrinkageStrain()

◆ setTIncrement()

◆ setTmax()

◆ storeEmodulus()

◆ updateYourself()

Member Data Documentation

◆ autogenousShrinkageStrain

◆ creepStrain

◆ creepStrainIncrement

◆ dryingShrinkageStrain

◆ equivalentTime

◆ equivalentTimeTemp

◆ flowTermViscosity

◆ flowTermViscosityTemp

◆ h_min

◆ hum

◆ hum_increment

◆ humNano

◆ humNanoTemp

◆ storedEmodulus

◆ storedEmodulusFlag

◆ T

◆ T_increment

◆ T_max

◆ tempAutogenousShrinkageStrain

◆ tempDryingShrinkageStrain