#include <nodalload.h>

Inheritance diagram for oofem::NodalLoad:

Collaboration diagram for oofem::NodalLoad:

Public Member Functions
	NodalLoad (int n, Domain *d)
const char *	giveInputRecordName () const override
void	computeValueAt (FloatArray &answer, TimeStep *tStep, const FloatArray &coords, ValueModeType mode) override
CoordSystType	giveCoordSystMode () override
void	initializeFrom (InputRecord &ir) override
void	giveInputRecord (DynamicInputRecord &input) override
const char *	giveClassName () const override
bcGeomType	giveBCGeoType () const override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
Public Member Functions inherited from oofem::Load
	Load (int n, Domain *d)
virtual	~Load ()
	Destructor.
virtual void	computeComponentArrayAt (FloatArray &answer, TimeStep *tStep, ValueModeType mode)
virtual void	computeValueAt (FloatArray &answer, TimeStep tStep, GaussPoint gp, ValueModeType mode)
virtual void	computeValues (FloatArray &answer, TimeStep *tStep, const FloatArray &coords, const IntArray &dofids, ValueModeType mode)
int	isDofExcluded (int index)
void	scale (double s) override
virtual FormulationType	giveFormulationType ()
virtual int	giveApproxOrder ()
virtual double	giveProperty (int aProperty, TimeStep *tStep) const override
const FloatArray &	giveComponentArray () const
void	setComponentArray (FloatArray &arry)
Public Member Functions inherited from oofem::GeneralBoundaryCondition
	GeneralBoundaryCondition (int n, Domain *d)
virtual	~GeneralBoundaryCondition ()
	Destructor.
int	giveSetNumber () const
virtual int	giveNumberOfInternalDofManagers ()
	Gives the number of internal dof managers.
virtual DofManager *	giveInternalDofManager (int i)
	Gives an internal dof manager from receiver.
Function *	giveTimeFunction ()
int	getIsImposedTimeFunctionNumber () const
void	setIsImposedTimeFunctionNumber (int funcIndx)
virtual bcValType	giveBCValType () const
virtual bool	isImposed (TimeStep *tStep)
virtual const IntArray &	giveDofIDs () const
virtual bcType	giveType () const
virtual void	updateYourself (TimeStep *tStep)
Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
virtual	~FEMComponent ()=default
	Virtual destructor.
Domain *	giveDomain () const
virtual void	setDomain (Domain *d)
int	giveNumber () const
void	setNumber (int num)
virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
virtual void	initializeFrom (InputRecord &ir, int priority)
virtual void	initializeFinish ()
virtual void	postInitialize ()
	Performs post initialization steps. Called after all components are created and initialized.
virtual int	checkConsistency ()
virtual void	printOutputAt (FILE file, TimeStep tStep)
virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging.
virtual Interface *	giveInterface (InterfaceType t)
std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros).

Protected Attributes
CoordSystType	coordSystemType
Protected Attributes inherited from oofem::Load
FloatArray	componentArray
	Components of boundary condition.
IntArray	dofExcludeMask
Protected Attributes inherited from oofem::GeneralBoundaryCondition
int	timeFunction
	Associated load time function.
bcValType	valType
	Physical meaning of BC value.
IntArray	dofs
	Dofs that b.c. is applied to (relevant for Dirichlet type b.c.s).
int	isImposedTimeFunction
int	set
	Set number for boundary condition to be applied to.
Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number.
Domain *	domain
	Link to domain object, useful for communicating with other FEM components.

Additional Inherited Members
Public Types inherited from oofem::Load
enum	CoordSystType { CST_Global , CST_Local , CST_UpdatedGlobal }
enum	FormulationType { FT_Entity , FT_Global }
Public Attributes inherited from oofem::Load
bool	reference

Detailed Description

Class implementing a concentrated load (force, moment,...) that acts directly on a dof manager (node or element side, if it has associated DOFs). This load could not be applied on an element. A nodal load is usually attribute of one or more nodes or element sides.

The component array, which size should be same as number of DOFs in particular node/side is read from input.

The attribute componentArray contains, for example for the case of a plane beam structure, 2 forces and 1 moment on a right place. (6 dof per node is assumed)

Note: {Load is not restricted to structural problems. For example, in thermal analysis, a nodal load would be a concentrated heat source.}

Definition at line 67 of file nodalload.h.

Constructor & Destructor Documentation

◆ NodalLoad()

oofem::NodalLoad::NodalLoad	(	int	n,
		Domain *	d )

inline

Constructor. Creates nodal load object with given number, belonging to given domain.

Parameters

n	Load number.
d	Domain to which new object will belongs.

Definition at line 83 of file nodalload.h.

References oofem::Load::Load().

Member Function Documentation

◆ computeValueAt()

void oofem::NodalLoad::computeValueAt	(	FloatArray &	answer,
		TimeStep *	tStep,
		const FloatArray &	coords,
		ValueModeType	mode )

inlineoverridevirtual

Computes components values of load at given point - global coordinates (coordinates given).

Parameters

answer	Component values at given point and time.
tStep	Time step representing time.
coords	Global (or local) problem coordinates, which are used to evaluate components values.
mode	Determines response mode.

Implements oofem::Load.

Definition at line 86 of file nodalload.h.

References oofem::Load::computeComponentArrayAt().

◆ giveBCGeoType()

bcGeomType oofem::NodalLoad::giveBCGeoType ( ) const

inlineoverridevirtual

Returns geometry character of boundary condition. For available values see cltypes.h file. Derived classes should always overload, default implementation returns UnknownLoadGT value.

Reimplemented from oofem::GeneralBoundaryCondition.

Definition at line 93 of file nodalload.h.

References oofem::NodalLoadBGT.

Referenced by oofem::Node::computeLoadVector().

◆ giveClassName()

const char * oofem::NodalLoad::giveClassName ( ) const

inlineoverridevirtual

Returns: Class name of the receiver.

Implements oofem::FEMComponent.

Definition at line 92 of file nodalload.h.

◆ giveCoordSystMode()

CoordSystType oofem::NodalLoad::giveCoordSystMode ( )

inlineoverridevirtual

Returns receiver's coordinate system.

Reimplemented from oofem::Load.

Definition at line 88 of file nodalload.h.

References coordSystemType.

Referenced by oofem::Node::computeLoadVector().

◆ giveInputRecord()

void oofem::NodalLoad::giveInputRecord ( DynamicInputRecord & input )

overridevirtual

Setups the input record string of receiver.

Parameters

input Dynamic input record to be filled by receiver.

Reimplemented from oofem::Load.

Definition at line 54 of file nodalload.C.

References _IFT_NodalLoad_cstype, coordSystemType, and oofem::DynamicInputRecord::setField().

◆ giveInputRecordName()

const char * oofem::NodalLoad::giveInputRecordName ( ) const

inlineoverridevirtual

Returns: Input record name of the receiver.

Implements oofem::FEMComponent.

Definition at line 85 of file nodalload.h.

References _IFT_NodalLoad_Name.

◆ initializeFrom()

void oofem::NodalLoad::initializeFrom ( InputRecord & ir )

overridevirtual

Initializes receiver according to object description stored in input record. This function is called immediately after creating object using constructor. Input record can be imagined as data record in component database belonging to receiver. Receiver may use value-name extracting functions to extract particular field from record. Note that initializeFrom may be called mutiple times.

See also: IR_GIVE_FIELD; IR_GIVE_OPTIONAL_FIELD

Parameters

ir	Input record to initialize from.
priority	Priority of the input record. This is used to determine the order of initialization

Reimplemented from oofem::Load.

Definition at line 45 of file nodalload.C.

References _IFT_NodalLoad_cstype, coordSystemType, and IR_GIVE_OPTIONAL_FIELD.

◆ restoreContext()

void oofem::NodalLoad::restoreContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::Load.

Definition at line 75 of file nodalload.C.

References oofem::CIO_IOERR, CM_Definition, coordSystemType, oofem::DataStream::read(), and THROW_CIOERR.

◆ saveContext()

void oofem::NodalLoad::saveContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::Load.

Definition at line 62 of file nodalload.C.

References oofem::CIO_IOERR, CM_Definition, coordSystemType, THROW_CIOERR, and oofem::DataStream::write().

Member Data Documentation

◆ coordSystemType

CoordSystType oofem::NodalLoad::coordSystemType

protected

Load coordinate system. It is actually used only when local coordinate system in node is defined and load is specified in global coordinate system

Definition at line 75 of file nodalload.h.

Referenced by giveCoordSystMode(), giveInputRecord(), initializeFrom(), restoreContext(), and saveContext().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ NodalLoad()

Member Function Documentation

◆ computeValueAt()

◆ giveBCGeoType()

◆ giveClassName()

◆ giveCoordSystMode()

◆ giveInputRecord()

◆ giveInputRecordName()

◆ initializeFrom()

◆ restoreContext()

◆ saveContext()

Member Data Documentation

◆ coordSystemType