#include <plasticmaterial.h>

Inheritance diagram for oofem::PlasticMaterialStatus:

Collaboration diagram for oofem::PlasticMaterialStatus:

Public Member Functions
	PlasticMaterialStatus (GaussPoint *g, int statusSize)
void	printOutputAt (FILE file, TimeStep tStep) const override
	Print receiver's output to given stream.
void	initTempStatus () override
void	updateYourself (TimeStep *tStep) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
const FloatArray &	givePlasticStrainVector () const
const FloatArray &	giveTempPlasticStrainVector () const
const FloatArray &	giveStrainSpaceHardeningVars () const
const FloatArray &	givetempStrainSpaceHardeningVarsVector () const
void	letPlasticStrainVectorBe (FloatArray v)
void	letTempPlasticStrainVectorBe (FloatArray v)
void	letTempStrainSpaceHardeningVarsVectorBe (FloatArray v)
void	letStrainSpaceHardeningVarsVectorBe (FloatArray v)
int	giveStateFlag () const
int	giveTempStateFlag () const
double	givePlasticConsistencyPrameter () const
double	giveTempPlasticConsistencyPrameter () const
void	letTempPlasticConsistencyPrameterBe (double v)
void	letTempStateFlagBe (int v)
const char *	giveClassName () const override
void	copyStateVariables (const MaterialStatus &iStatus) override
	Functions for MaterialStatusMapperInterface.
void	addStateVariables (const MaterialStatus &iStatus) override
Public Member Functions inherited from oofem::StructuralMaterialStatus
	StructuralMaterialStatus (GaussPoint *g)
	Constructor. Creates new StructuralMaterialStatus with IntegrationPoint g.
void	printOutputAt (FILE file, TimeStep tStep) const override
	Print receiver's output to given stream.
void	initTempStatus () override
void	updateYourself (TimeStep *tStep) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
const FloatArray &	giveStrainVector () const
	Returns the const pointer to receiver's strain vector.
const FloatArray &	giveStressVector () const
	Returns the const pointer to receiver's stress vector.
const FloatArray &	givePVector () const
	Returns the const pointer to receiver's first Piola-Kirchhoff stress vector.
const FloatArray &	giveCVector () const
	Returns the const pointer to receiver's Cauchy stress vector.
const FloatArray &	giveFVector () const
	Returns the const pointer to receiver's deformation gradient vector.
const FloatArray &	giveTempStrainVector () const
	Returns the const pointer to receiver's temporary strain vector.
const FloatArray &	giveTempStressVector () const
	Returns the const pointer to receiver's temporary stress vector.
const FloatArray &	giveTempPVector () const
	Returns the const pointer to receiver's temporary first Piola-Kirchhoff stress vector.
const FloatArray &	giveTempCVector () const
	Returns the const pointer to receiver's temporary Cauchy stress vector.
const FloatArray &	giveTempFVector () const
	Returns the const pointer to receiver's temporary deformation gradient vector.
void	letStrainVectorBe (const FloatArray &v)
	Assigns strain vector to given vector v.
void	letStressVectorBe (const FloatArray &v)
	Assigns stressVector to given vector v.
void	letPVectorBe (const FloatArray &v)
	Assigns PVector to given vector v.
void	letCVectorBe (const FloatArray &v)
	Assigns CVector to given vector v.
void	letFVectorBe (const FloatArray &v)
	Assigns FVector to given vector v.
void	letTempStressVectorBe (const FloatArray &v)
	Assigns tempStressVector to given vector v.
void	letTempStrainVectorBe (const FloatArray &v)
	Assigns tempStrainVector to given vector v.
void	letTempPVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v.
void	letTempCVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v.
void	letTempFVectorBe (const FloatArray &v)
	Assigns tempFVector to given vector v.
const char *	giveClassName () const override
void	copyStateVariables (const MaterialStatus &iStatus) override
	Functions for MaterialStatusMapperInterface.
void	addStateVariables (const MaterialStatus &iStatus) override
Public Member Functions inherited from oofem::MaterialStatus
	MaterialStatus (GaussPoint *g)
virtual bool	giveMaterialProperty (int propID, double &value)
virtual void	setMaterialProperty (int propID, double value)
Public Member Functions inherited from oofem::IntegrationPointStatus
	IntegrationPointStatus (GaussPoint *g)
virtual	~IntegrationPointStatus ()=default
	Destructor.
virtual void	setStatusVariable (int varID, double value)
virtual Interface *	giveInterface (InterfaceType t)
Public Member Functions inherited from oofem::MaterialStatusMapperInterface
	MaterialStatusMapperInterface ()
virtual	~MaterialStatusMapperInterface ()
virtual int	MSMI_map (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
virtual int	MSMI_map_cz (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
virtual int	MSMI_update (const GaussPoint &iGP, const TimeStep &iTStep)
virtual int	MSMI_finish (const TimeStep &iTStep)

Protected Attributes
FloatArray	plasticStrainVector
	Plastic strain vector (reduced form).
FloatArray	tempPlasticStrainVector
FloatArray	strainSpaceHardeningVarsVector
	Strain space hardening variables.
FloatArray	tempStrainSpaceHardeningVarsVector
int	state_flag = PM_Elastic
	Yield function status indicator.
int	temp_state_flag = PM_Elastic
double	gamma = 0.
	Plastic consistency parameter.
double	temp_gamma = 0.
Protected Attributes inherited from oofem::StructuralMaterialStatus
FloatArray	strainVector
	Equilibrated strain vector in reduced form.
FloatArray	stressVector
	Equilibrated stress vector in reduced form.
FloatArray	tempStressVector
	Temporary stress vector in reduced form (increments are used mainly in nonlinear analysis).
FloatArray	tempStrainVector
	Temporary strain vector in reduced form (to find balanced state).
FloatArray	PVector
	Equilibrated first Piola-Kirchhoff stress vector.
FloatArray	tempPVector
	Temporary first Piola-Kirchhoff stress vector (to find balanced state).
FloatArray	CVector
	Equilibrated Cauchy stress vector.
FloatArray	tempCVector
	Temporary Cauchy stress vector (to find balanced state).
FloatArray	FVector
	Equilibrated deformation gradient in reduced form.
FloatArray	tempFVector
	Temporary deformation gradient in reduced form (to find balanced state).
Protected Attributes inherited from oofem::IntegrationPointStatus
GaussPoint *	gp
	Associated integration point.
Protected Attributes inherited from oofem::MaterialStatusMapperInterface
std::unique_ptr< MaterialMappingAlgorithm >	mpMaterialMapper

Detailed Description

This class implements associated Material Status to PlasticMaterial.

Definition at line 52 of file plasticmaterial.h.

Constructor & Destructor Documentation

◆ PlasticMaterialStatus()

oofem::PlasticMaterialStatus::PlasticMaterialStatus	(	GaussPoint *	g,
		int	statusSize )

Definition at line 679 of file plasticmaterial.C.

References plasticStrainVector, strainSpaceHardeningVarsVector, oofem::StructuralMaterialStatus::StructuralMaterialStatus(), tempPlasticStrainVector, and tempStrainSpaceHardeningVarsVector.

Referenced by copyStateVariables().

Member Function Documentation

◆ addStateVariables()

void oofem::PlasticMaterialStatus::addStateVariables ( const MaterialStatus & iStatus )

overridevirtual

Implements oofem::MaterialStatusMapperInterface.

Definition at line 819 of file plasticmaterial.C.

◆ copyStateVariables()

void oofem::PlasticMaterialStatus::copyStateVariables ( const MaterialStatus & iStatus )

overridevirtual

◆ giveClassName()

const char * oofem::PlasticMaterialStatus::giveClassName ( ) const

inlineoverridevirtual

Implements oofem::IntegrationPointStatus.

Definition at line 99 of file plasticmaterial.h.

◆ givePlasticConsistencyPrameter()

double oofem::PlasticMaterialStatus::givePlasticConsistencyPrameter ( ) const

inline

Definition at line 93 of file plasticmaterial.h.

References gamma.

Referenced by copyStateVariables().

◆ givePlasticStrainVector()

const FloatArray & oofem::PlasticMaterialStatus::givePlasticStrainVector ( ) const

inline

Definition at line 81 of file plasticmaterial.h.

References plasticStrainVector.

Referenced by oofem::PlasticMaterial::ComputeResidualVector(), copyStateVariables(), oofem::PlasticMaterial::giveIPValue(), and oofem::PlasticMaterial::giveRealStressVector().

◆ giveStateFlag()

int oofem::PlasticMaterialStatus::giveStateFlag ( ) const

inline

Definition at line 91 of file plasticmaterial.h.

References state_flag.

Referenced by copyStateVariables(), and oofem::PlasticMaterial::giveRealStressVector().

◆ giveStrainSpaceHardeningVars()

const FloatArray & oofem::PlasticMaterialStatus::giveStrainSpaceHardeningVars ( ) const

inline

Definition at line 83 of file plasticmaterial.h.

References strainSpaceHardeningVarsVector.

Referenced by oofem::PlasticMaterial::ComputeResidualVector(), copyStateVariables(), oofem::PlasticMaterial::giveConsistentStiffnessMatrix(), and oofem::PlasticMaterial::giveRealStressVector().

◆ giveTempPlasticConsistencyPrameter()

double oofem::PlasticMaterialStatus::giveTempPlasticConsistencyPrameter ( ) const

inline

Definition at line 94 of file plasticmaterial.h.

References temp_gamma.

Referenced by copyStateVariables(), and oofem::PlasticMaterial::giveConsistentStiffnessMatrix().

◆ giveTempPlasticStrainVector()

const FloatArray & oofem::PlasticMaterialStatus::giveTempPlasticStrainVector ( ) const

inline

Definition at line 82 of file plasticmaterial.h.

References tempPlasticStrainVector.

Referenced by copyStateVariables().

◆ giveTempStateFlag()

int oofem::PlasticMaterialStatus::giveTempStateFlag ( ) const

inline

Definition at line 92 of file plasticmaterial.h.

References temp_state_flag.

Referenced by copyStateVariables(), and oofem::PlasticMaterial::giveConsistentStiffnessMatrix().

◆ givetempStrainSpaceHardeningVarsVector()

const FloatArray & oofem::PlasticMaterialStatus::givetempStrainSpaceHardeningVarsVector ( ) const

inline

Definition at line 84 of file plasticmaterial.h.

References tempStrainSpaceHardeningVarsVector.

Referenced by copyStateVariables().

◆ initTempStatus()

void oofem::PlasticMaterialStatus::initTempStatus ( )

overridevirtual

Initializes the temporary internal variables, describing the current state according to previously reached equilibrium internal variables.

Reimplemented from oofem::MaterialStatus.

Definition at line 714 of file plasticmaterial.C.

References gamma, oofem::IntegrationPointStatus::gp, plasticStrainVector, state_flag, strainSpaceHardeningVarsVector, temp_gamma, temp_state_flag, tempPlasticStrainVector, and tempStrainSpaceHardeningVarsVector.

◆ letPlasticStrainVectorBe()

void oofem::PlasticMaterialStatus::letPlasticStrainVectorBe ( FloatArray v )

inline

Definition at line 86 of file plasticmaterial.h.

References plasticStrainVector.

◆ letStrainSpaceHardeningVarsVectorBe()

void oofem::PlasticMaterialStatus::letStrainSpaceHardeningVarsVectorBe ( FloatArray v )

inline

Definition at line 89 of file plasticmaterial.h.

References strainSpaceHardeningVarsVector.

◆ letTempPlasticConsistencyPrameterBe()

void oofem::PlasticMaterialStatus::letTempPlasticConsistencyPrameterBe ( double v )

inline

Definition at line 95 of file plasticmaterial.h.

References gamma.

Referenced by oofem::PlasticMaterial::giveRealStressVector().

◆ letTempPlasticStrainVectorBe()

void oofem::PlasticMaterialStatus::letTempPlasticStrainVectorBe ( FloatArray v )

inline

Definition at line 87 of file plasticmaterial.h.

References tempPlasticStrainVector.

Referenced by oofem::PlasticMaterial::giveRealStressVector().

◆ letTempStateFlagBe()

void oofem::PlasticMaterialStatus::letTempStateFlagBe ( int v )

inline

Definition at line 97 of file plasticmaterial.h.

References temp_state_flag.

Referenced by oofem::PlasticMaterial::giveRealStressVector().

◆ letTempStrainSpaceHardeningVarsVectorBe()

void oofem::PlasticMaterialStatus::letTempStrainSpaceHardeningVarsVectorBe ( FloatArray v )

inline

Definition at line 88 of file plasticmaterial.h.

References tempStrainSpaceHardeningVarsVector.

Referenced by oofem::PlasticMaterial::giveRealStressVector().

◆ printOutputAt()

void oofem::PlasticMaterialStatus::printOutputAt	(	FILE *	file,
		TimeStep *	tStep ) const

overridevirtual

Print receiver's output to given stream.

Reimplemented from oofem::MaterialStatus.

Definition at line 686 of file plasticmaterial.C.

References plasticStrainVector, oofem::PM_Unloading, oofem::PM_Yielding, state_flag, and strainSpaceHardeningVarsVector.

◆ restoreContext()

void oofem::PlasticMaterialStatus::restoreContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::IntegrationPointStatus.

Definition at line 778 of file plasticmaterial.C.

References oofem::CIO_IOERR, oofem::CIO_OK, gamma, plasticStrainVector, oofem::DataStream::read(), state_flag, strainSpaceHardeningVarsVector, and THROW_CIOERR.

◆ saveContext()

void oofem::PlasticMaterialStatus::saveContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::IntegrationPointStatus.

Definition at line 754 of file plasticmaterial.C.

References oofem::CIO_IOERR, oofem::CIO_OK, gamma, plasticStrainVector, state_flag, strainSpaceHardeningVarsVector, THROW_CIOERR, and oofem::DataStream::write().

◆ updateYourself()

void oofem::PlasticMaterialStatus::updateYourself ( TimeStep * )

overridevirtual

Update equilibrium history variables according to temp-variables. Invoked, after new equilibrium state has been reached.

Reimplemented from oofem::MaterialStatus.

Definition at line 736 of file plasticmaterial.C.

References gamma, plasticStrainVector, state_flag, strainSpaceHardeningVarsVector, temp_gamma, temp_state_flag, tempPlasticStrainVector, and tempStrainSpaceHardeningVarsVector.

Member Data Documentation

◆ gamma

double oofem::PlasticMaterialStatus::gamma = 0.

protected

Plastic consistency parameter.

Definition at line 68 of file plasticmaterial.h.

Referenced by copyStateVariables(), givePlasticConsistencyPrameter(), initTempStatus(), letTempPlasticConsistencyPrameterBe(), restoreContext(), saveContext(), and updateYourself().

◆ plasticStrainVector

FloatArray oofem::PlasticMaterialStatus::plasticStrainVector

protected

Plastic strain vector (reduced form).

Definition at line 56 of file plasticmaterial.h.

Referenced by copyStateVariables(), givePlasticStrainVector(), initTempStatus(), letPlasticStrainVectorBe(), PlasticMaterialStatus(), printOutputAt(), restoreContext(), saveContext(), and updateYourself().

◆ state_flag

int oofem::PlasticMaterialStatus::state_flag = PM_Elastic

protected

Yield function status indicator.

Definition at line 64 of file plasticmaterial.h.

Referenced by copyStateVariables(), giveStateFlag(), initTempStatus(), printOutputAt(), restoreContext(), saveContext(), and updateYourself().

◆ strainSpaceHardeningVarsVector

FloatArray oofem::PlasticMaterialStatus::strainSpaceHardeningVarsVector

protected

Strain space hardening variables.

Definition at line 60 of file plasticmaterial.h.

Referenced by copyStateVariables(), giveStrainSpaceHardeningVars(), initTempStatus(), letStrainSpaceHardeningVarsVectorBe(), PlasticMaterialStatus(), printOutputAt(), restoreContext(), saveContext(), and updateYourself().

◆ temp_gamma

double oofem::PlasticMaterialStatus::temp_gamma = 0.

protected

Definition at line 68 of file plasticmaterial.h.

Referenced by copyStateVariables(), giveTempPlasticConsistencyPrameter(), initTempStatus(), and updateYourself().

◆ temp_state_flag

int oofem::PlasticMaterialStatus::temp_state_flag = PM_Elastic

protected

Definition at line 65 of file plasticmaterial.h.

Referenced by copyStateVariables(), giveTempStateFlag(), initTempStatus(), letTempStateFlagBe(), and updateYourself().

◆ tempPlasticStrainVector

FloatArray oofem::PlasticMaterialStatus::tempPlasticStrainVector

protected

Definition at line 57 of file plasticmaterial.h.

Referenced by copyStateVariables(), giveTempPlasticStrainVector(), initTempStatus(), letTempPlasticStrainVectorBe(), PlasticMaterialStatus(), and updateYourself().

◆ tempStrainSpaceHardeningVarsVector

FloatArray oofem::PlasticMaterialStatus::tempStrainSpaceHardeningVarsVector

protected

Definition at line 61 of file plasticmaterial.h.

Referenced by copyStateVariables(), givetempStrainSpaceHardeningVarsVector(), initTempStatus(), letTempStrainSpaceHardeningVarsVectorBe(), PlasticMaterialStatus(), and updateYourself().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ PlasticMaterialStatus()

Member Function Documentation

◆ addStateVariables()

◆ copyStateVariables()

◆ giveClassName()

◆ givePlasticConsistencyPrameter()

◆ givePlasticStrainVector()

◆ giveStateFlag()

◆ giveStrainSpaceHardeningVars()

◆ giveTempPlasticConsistencyPrameter()

◆ giveTempPlasticStrainVector()

◆ giveTempStateFlag()

◆ givetempStrainSpaceHardeningVarsVector()

◆ initTempStatus()

◆ letPlasticStrainVectorBe()

◆ letStrainSpaceHardeningVarsVectorBe()

◆ letTempPlasticConsistencyPrameterBe()

◆ letTempPlasticStrainVectorBe()

◆ letTempStateFlagBe()

◆ letTempStrainSpaceHardeningVarsVectorBe()

◆ printOutputAt()

◆ restoreContext()

◆ saveContext()

◆ updateYourself()

Member Data Documentation

◆ gamma

◆ plasticStrainVector

◆ state_flag

◆ strainSpaceHardeningVarsVector

◆ temp_gamma

◆ temp_state_flag

◆ tempPlasticStrainVector

◆ tempStrainSpaceHardeningVarsVector