#include <trabbonematerial.h>

Inheritance diagram for oofem::TrabBoneMaterialStatus:

Collaboration diagram for oofem::TrabBoneMaterialStatus:

Public Member Functions
	TrabBoneMaterialStatus (GaussPoint *g)
void	printOutputAt (FILE file, TimeStep tStep) const override
	Print receiver's output to given stream.
double	giveAlpha () const
double	giveTempAlpha () const
double	giveDam () const
double	giveTempDam () const
double	giveSlope () const
double	giveSigC () const
double	giveMatConstC () const
const FloatArrayF< 1 > &	givePlasStrainVector () const
const FloatArrayF< 1 > &	giveTempPlasStrainVector () const
const FloatArrayF< 1 > &	giveTempIncPlasStrainVector () const
void	setTempAlpha (double al)
void	setTempDam (double da)
void	setSlope (double slp)
void	setSigC (double sc)
void	setMatConstC (double mcc)
void	setTempEpsp (double epsip)
void	setTempDepsp (double depsip)
const char *	giveClassName () const override
void	initTempStatus () override
void	updateYourself (TimeStep *tStep) override
void	saveContext (DataStream &stream, ContextMode mode) override
void	restoreContext (DataStream &stream, ContextMode mode) override
Public Member Functions inherited from oofem::StructuralMaterialStatus
	StructuralMaterialStatus (GaussPoint *g)
	Constructor. Creates new StructuralMaterialStatus with IntegrationPoint g.
const FloatArray &	giveStrainVector () const
	Returns the const pointer to receiver's strain vector.
const FloatArray &	giveStressVector () const
	Returns the const pointer to receiver's stress vector.
const FloatArray &	givePVector () const
	Returns the const pointer to receiver's first Piola-Kirchhoff stress vector.
const FloatArray &	giveCVector () const
	Returns the const pointer to receiver's Cauchy stress vector.
const FloatArray &	giveFVector () const
	Returns the const pointer to receiver's deformation gradient vector.
const FloatArray &	giveTempStrainVector () const
	Returns the const pointer to receiver's temporary strain vector.
const FloatArray &	giveTempStressVector () const
	Returns the const pointer to receiver's temporary stress vector.
const FloatArray &	giveTempPVector () const
	Returns the const pointer to receiver's temporary first Piola-Kirchhoff stress vector.
const FloatArray &	giveTempCVector () const
	Returns the const pointer to receiver's temporary Cauchy stress vector.
const FloatArray &	giveTempFVector () const
	Returns the const pointer to receiver's temporary deformation gradient vector.
void	letStrainVectorBe (const FloatArray &v)
	Assigns strain vector to given vector v.
void	letStressVectorBe (const FloatArray &v)
	Assigns stressVector to given vector v.
void	letPVectorBe (const FloatArray &v)
	Assigns PVector to given vector v.
void	letCVectorBe (const FloatArray &v)
	Assigns CVector to given vector v.
void	letFVectorBe (const FloatArray &v)
	Assigns FVector to given vector v.
void	letTempStressVectorBe (const FloatArray &v)
	Assigns tempStressVector to given vector v.
void	letTempStrainVectorBe (const FloatArray &v)
	Assigns tempStrainVector to given vector v.
void	letTempPVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v.
void	letTempCVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v.
void	letTempFVectorBe (const FloatArray &v)
	Assigns tempFVector to given vector v.
void	copyStateVariables (const MaterialStatus &iStatus) override
	Functions for MaterialStatusMapperInterface.
void	addStateVariables (const MaterialStatus &iStatus) override
Public Member Functions inherited from oofem::MaterialStatus
	MaterialStatus (GaussPoint *g)
virtual bool	giveMaterialProperty (int propID, double &value)
virtual void	setMaterialProperty (int propID, double value)
Public Member Functions inherited from oofem::IntegrationPointStatus
	IntegrationPointStatus (GaussPoint *g)
virtual	~IntegrationPointStatus ()=default
	Destructor.
virtual void	setStatusVariable (int varID, double value)
virtual Interface *	giveInterface (InterfaceType t)
Public Member Functions inherited from oofem::MaterialStatusMapperInterface
	MaterialStatusMapperInterface ()
virtual	~MaterialStatusMapperInterface ()
virtual int	MSMI_map (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
virtual int	MSMI_map_cz (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
virtual int	MSMI_update (const GaussPoint &iGP, const TimeStep &iTStep)
virtual int	MSMI_finish (const TimeStep &iTStep)

Protected Attributes
double	tempAlpha = 0.
double	alpha = 0.
double	tempDam = 0.
double	dam = 0.
double	slope = 0.
double	sigC = 0.
double	matConstC = 0.
FloatArrayF< 1 >	tempEpsp
FloatArrayF< 1 >	epsp
FloatArrayF< 1 >	tempDepsp
Protected Attributes inherited from oofem::StructuralMaterialStatus
FloatArray	strainVector
	Equilibrated strain vector in reduced form.
FloatArray	stressVector
	Equilibrated stress vector in reduced form.
FloatArray	tempStressVector
	Temporary stress vector in reduced form (increments are used mainly in nonlinear analysis).
FloatArray	tempStrainVector
	Temporary strain vector in reduced form (to find balanced state).
FloatArray	PVector
	Equilibrated first Piola-Kirchhoff stress vector.
FloatArray	tempPVector
	Temporary first Piola-Kirchhoff stress vector (to find balanced state).
FloatArray	CVector
	Equilibrated Cauchy stress vector.
FloatArray	tempCVector
	Temporary Cauchy stress vector (to find balanced state).
FloatArray	FVector
	Equilibrated deformation gradient in reduced form.
FloatArray	tempFVector
	Temporary deformation gradient in reduced form (to find balanced state).
Protected Attributes inherited from oofem::IntegrationPointStatus
GaussPoint *	gp
	Associated integration point.
Protected Attributes inherited from oofem::MaterialStatusMapperInterface
std::unique_ptr< MaterialMappingAlgorithm >	mpMaterialMapper

Detailed Description

This class implements associated Material Status to TrabBoneMaterial.

Definition at line 68 of file trabbonematerial.h.

Constructor & Destructor Documentation

◆ TrabBoneMaterialStatus()

oofem::TrabBoneMaterialStatus::TrabBoneMaterialStatus ( GaussPoint * g )

Definition at line 237 of file trabbonematerial.C.

References oofem::StructuralMaterialStatus::StructuralMaterialStatus().

Referenced by oofem::TrabBoneNLStatus::TrabBoneNLStatus().

Member Function Documentation

◆ giveAlpha()

double oofem::TrabBoneMaterialStatus::giveAlpha ( ) const

inline

Definition at line 83 of file trabbonematerial.h.

References alpha.

◆ giveClassName()

const char * oofem::TrabBoneMaterialStatus::giveClassName ( ) const

inlineoverridevirtual

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::TrabBoneNLStatus.

Definition at line 102 of file trabbonematerial.h.

◆ giveDam()

double oofem::TrabBoneMaterialStatus::giveDam ( ) const

inline

Definition at line 85 of file trabbonematerial.h.

References dam.

◆ giveMatConstC()

double oofem::TrabBoneMaterialStatus::giveMatConstC ( ) const

inline

Definition at line 89 of file trabbonematerial.h.

References matConstC.

◆ givePlasStrainVector()

const FloatArrayF< 1 > & oofem::TrabBoneMaterialStatus::givePlasStrainVector ( ) const

inline

Definition at line 90 of file trabbonematerial.h.

References epsp.

◆ giveSigC()

double oofem::TrabBoneMaterialStatus::giveSigC ( ) const

inline

Definition at line 88 of file trabbonematerial.h.

References sigC.

◆ giveSlope()

double oofem::TrabBoneMaterialStatus::giveSlope ( ) const

inline

Definition at line 87 of file trabbonematerial.h.

References slope.

◆ giveTempAlpha()

double oofem::TrabBoneMaterialStatus::giveTempAlpha ( ) const

inline

Definition at line 84 of file trabbonematerial.h.

References tempAlpha.

Referenced by oofem::TrabBoneMaterial::computeCumPlastStrain().

◆ giveTempDam()

double oofem::TrabBoneMaterialStatus::giveTempDam ( ) const

inline

Definition at line 86 of file trabbonematerial.h.

References tempDam.

◆ giveTempIncPlasStrainVector()

const FloatArrayF< 1 > & oofem::TrabBoneMaterialStatus::giveTempIncPlasStrainVector ( ) const

inline

Definition at line 92 of file trabbonematerial.h.

References tempDepsp.

◆ giveTempPlasStrainVector()

const FloatArrayF< 1 > & oofem::TrabBoneMaterialStatus::giveTempPlasStrainVector ( ) const

inline

Definition at line 91 of file trabbonematerial.h.

References tempEpsp.

◆ initTempStatus()

void oofem::TrabBoneMaterialStatus::initTempStatus ( )

overridevirtual

Initializes the temporary internal variables, describing the current state according to previously reached equilibrium internal variables.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::TrabBoneNLStatus.

Definition at line 254 of file trabbonematerial.C.

References alpha, dam, epsp, tempAlpha, tempDam, and tempEpsp.

◆ printOutputAt()

void oofem::TrabBoneMaterialStatus::printOutputAt	(	FILE *	file,
		TimeStep *	tStep ) const

overridevirtual

Print receiver's output to given stream.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::TrabBoneNLStatus.

Definition at line 243 of file trabbonematerial.C.

References tempEpsp.

◆ restoreContext()

void oofem::TrabBoneMaterialStatus::restoreContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::StructuralMaterialStatus.

Definition at line 286 of file trabbonematerial.C.

◆ saveContext()

void oofem::TrabBoneMaterialStatus::saveContext	(	DataStream &	stream,
		ContextMode	mode )

overridevirtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::StructuralMaterialStatus.

Definition at line 274 of file trabbonematerial.C.

◆ setMatConstC()

void oofem::TrabBoneMaterialStatus::setMatConstC ( double mcc )

inline

Definition at line 98 of file trabbonematerial.h.

References matConstC.

◆ setSigC()

void oofem::TrabBoneMaterialStatus::setSigC ( double sc )

inline

Definition at line 97 of file trabbonematerial.h.

References sigC.

◆ setSlope()

void oofem::TrabBoneMaterialStatus::setSlope ( double slp )

inline

Definition at line 96 of file trabbonematerial.h.

References slope.

◆ setTempAlpha()

void oofem::TrabBoneMaterialStatus::setTempAlpha ( double al )

inline

Definition at line 94 of file trabbonematerial.h.

References tempAlpha.

◆ setTempDam()

void oofem::TrabBoneMaterialStatus::setTempDam ( double da )

inline

Definition at line 95 of file trabbonematerial.h.

References tempDam.

◆ setTempDepsp()

void oofem::TrabBoneMaterialStatus::setTempDepsp ( double depsip )

inline

Definition at line 100 of file trabbonematerial.h.

References tempDepsp.

◆ setTempEpsp()

void oofem::TrabBoneMaterialStatus::setTempEpsp ( double epsip )

inline

Definition at line 99 of file trabbonematerial.h.

References tempEpsp.

◆ updateYourself()

void oofem::TrabBoneMaterialStatus::updateYourself ( TimeStep * )

overridevirtual

Update equilibrium history variables according to temp-variables. Invoked, after new equilibrium state has been reached.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::TrabBoneNLStatus.

Definition at line 264 of file trabbonematerial.C.

References alpha, dam, epsp, tempAlpha, tempDam, and tempEpsp.

Member Data Documentation

◆ alpha

double oofem::TrabBoneMaterialStatus::alpha = 0.

protected

Definition at line 71 of file trabbonematerial.h.

Referenced by giveAlpha(), initTempStatus(), oofem::TrabBoneNLStatus::printOutputAt(), and updateYourself().

◆ dam

double oofem::TrabBoneMaterialStatus::dam = 0.

protected

Definition at line 72 of file trabbonematerial.h.

Referenced by giveDam(), initTempStatus(), oofem::TrabBoneNLStatus::printOutputAt(), and updateYourself().

◆ epsp

FloatArrayF<1> oofem::TrabBoneMaterialStatus::epsp

protected

Definition at line 76 of file trabbonematerial.h.

Referenced by givePlasStrainVector(), initTempStatus(), oofem::TrabBoneNLStatus::printOutputAt(), and updateYourself().

◆ matConstC

double oofem::TrabBoneMaterialStatus::matConstC = 0.

protected

Definition at line 74 of file trabbonematerial.h.

Referenced by giveMatConstC(), and setMatConstC().

◆ sigC

double oofem::TrabBoneMaterialStatus::sigC = 0.

protected

Definition at line 74 of file trabbonematerial.h.

Referenced by giveSigC(), and setSigC().

◆ slope

double oofem::TrabBoneMaterialStatus::slope = 0.

protected

Definition at line 73 of file trabbonematerial.h.

Referenced by giveSlope(), and setSlope().

◆ tempAlpha

double oofem::TrabBoneMaterialStatus::tempAlpha = 0.

protected

Definition at line 71 of file trabbonematerial.h.

Referenced by giveTempAlpha(), initTempStatus(), setTempAlpha(), and updateYourself().

◆ tempDam

double oofem::TrabBoneMaterialStatus::tempDam = 0.

protected

Definition at line 72 of file trabbonematerial.h.

Referenced by giveTempDam(), initTempStatus(), setTempDam(), and updateYourself().

◆ tempDepsp

FloatArrayF<1> oofem::TrabBoneMaterialStatus::tempDepsp

protected

Definition at line 76 of file trabbonematerial.h.

Referenced by giveTempIncPlasStrainVector(), and setTempDepsp().

◆ tempEpsp

FloatArrayF<1> oofem::TrabBoneMaterialStatus::tempEpsp

protected

Definition at line 76 of file trabbonematerial.h.

Referenced by giveTempPlasStrainVector(), initTempStatus(), printOutputAt(), setTempEpsp(), and updateYourself().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ TrabBoneMaterialStatus()

Member Function Documentation

◆ giveAlpha()

◆ giveClassName()

◆ giveDam()

◆ giveMatConstC()

◆ givePlasStrainVector()

◆ giveSigC()

◆ giveSlope()

◆ giveTempAlpha()

◆ giveTempDam()

◆ giveTempIncPlasStrainVector()

◆ giveTempPlasStrainVector()

◆ initTempStatus()

◆ printOutputAt()

◆ restoreContext()

◆ saveContext()

◆ setMatConstC()

◆ setSigC()

◆ setSlope()

◆ setTempAlpha()

◆ setTempDam()

◆ setTempDepsp()

◆ setTempEpsp()

◆ updateYourself()

Member Data Documentation

◆ alpha

◆ dam

◆ epsp

◆ matConstC

◆ sigC

◆ slope

◆ tempAlpha

◆ tempDam

◆ tempDepsp

◆ tempEpsp